Touch 'n Seal U2-600 Fire Retardent Closed Foam Spray Foam Insulation Kit 600bf

US $680.49

Minneapolis, Minnesota, United States
Jan 30th

Open on mobile:
QR code

Product Info: Please read before you purchase: This is a complete kit with hose, applicator and nozzles! Includes fan and conical spray tips! The operating temperature for this kit is between 60°F - 80°F for both the ambient (surrounding) temperature and the surface temperature of the material you are applying it to. Failure to use the kit within the recommended operating temperature range may cause your kit to dispense improperly. If stored in a cold climate, you MUST warm the kit to the recommended temperature before using it. Make sure you carefully read the instructions before using this kit. This kit is a HAZARDOUS MATERIAL and will require a signature for delivery - FedEx cannot leave this at your door without being signed for. Please include a daytime telephone number so that you can be contacted regarding any delivery issues. We ship NEW, FRESH kits - typically less than 1-2 months old. If you have any issues with your kit, please contact us by e-mail or call us. You can also get technical support from the mfg at (800)325-6180 or view troubleshooting tips by clicking here. Leaving us negative or neutral feedback stating that you had problems with your kit doesn't help us solve your problem. Touch n Seal Two Component Class I Fire Retardant Foam Kits are portable, self contained dispensing systems that, when used according to manufacturers directions, supply Class I fire retardant, thermal insulating and sound attenuating 2- component polyurethane spray foam. Touch n Seal spray foam is permanent and dries within minutes of application. Touch n Seal Spray Foam Kits use disposable, pressurized chemical cylinders to dispense polyurethane spray foams eliminating the need for external air compressors, pumping equipment or dry nitrogen. The system provides quick and easy foam application for repairs and renovations, new installations and production applications. Touch n Seal Two Component Class I Fire Retardant Foam Kits are suitable for use in commercial, residential, transportation and many other applications. Touch n Seal spray foams offer increased structural strength, support, superior sound and thermal insulation, protection against energy-robbing air infiltration, thus reducing building energy consumption. Yields 600 board feet or 600 square feet using a 1" layer(1 board foot = 12" x 12" x 1"), 50 cubic feet - this is based on ideal lab conditions, your results may vary based on environmental factors, including the temperature of the surface you are spraying, or the ambient surrounding temperature. We cannot guarantee 100% yield on any kit; for best results, please make sure to carefully follow the application guidelines and temperature guidelines Class 1, fire retardant foam Reduces energy loss by as much as 40% Portable, disposable, self-contained units High closed cell content of cured foam makes it suitable as a general sealant to prevent air leakage in cold storage and other insulating applications Foam expands 30 times, dries in less than 1 minute Fast set-up Upright assembly No CFCs or urea formaldehyde Kits include A & B cylinders, P2 applicator gun with 10 ft hoses, extra spray nozzles, assembly wrench, latex gloves, lubricant and trilingual instructions (English, Spanish, French) Clear, color-coded hoses Includes illustrated instructions 12 Month Shelf Life, Use All Contents Within 30 Days of Initial Dispensing Specifications: Density (ASTM D-1622): 1.75 +/- 0.2 pcf R-Value (ASTM C-518): 7.12 per inch Closed Cell Content (ASTM D-2856): 90% minimum Flame Spread Index: 15 Smoke Development: 250

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Model

600 Standard Foam