+ Post new Ad
Traub Hydraulic Barfeed (Single Bar Hydro Feed Type A), US $699.00 – Picture 0
Traub Hydraulic Barfeed (Single Bar Hydro Feed Type A), US $699.00 – Picture 1
Traub Hydraulic Barfeed (Single Bar Hydro Feed Type A), US $699.00 – Picture 2
Traub Hydraulic Barfeed (Single Bar Hydro Feed Type A), US $699.00 – Picture 0
Traub Hydraulic Barfeed (Single Bar Hydro Feed Type A), US $699.00 – Picture 1
Traub Hydraulic Barfeed (Single Bar Hydro Feed Type A), US $699.00 – Picture 2

Traub Hydraulic Barfeed (single Bar Hydro Feed Type A)

US $699.00

  • Lincoln, Nebraska, United States
  • Jan 30th
Open on mobile:
QR code
This is a Traub HYV-A 5500 single bar hydraulic barfeeder.  It was paired with an Okuma NC4PS CNC Lathe and is in perfect operating condition.  It would run thousands of feet of stock day after day without any issues at all.  The lathe was removed from service and this feeder is no longer needed.  It will swallow 16' bar lengths and operates with a simple hydraulic bypass system that applies constant fluid around the barstock to keep it centered in the tube while advancing it through the lathe chuck.  The ram automatically retracts when the bar is used up.  Though it was paired with the Okuma, the wiring and control are simple enough that it could probably be wired to operated independently.  The motor is 230V 3-phase and the control is 115 single phase.  The manual is also included. Overall dimensions are approximately 19' long, 4' tall and 2' wide.  Weight is around 1,000lbs.  I'll load onto your flatbed truck or trailer for free. 

Directions

Similar products from Other Manufacturing Equipment & Tools

FINN RS1000/4B POWER SHEAR/PUNCH

FINN RS1000/4B POWER SHEAR/PUNCH

  • Euclid, Ohio, United States
  • Jan 30th
AGIE Classic 2S CNC Wire EDM 2005

AGIE Classic 2S CNC Wire EDM 2005

  • Belleville, New Jersey, United States
  • Jan 30th
AGIE Classic 2S CNC Wire EDM 2006

AGIE Classic 2S CNC Wire EDM 2006

  • Belleville, New Jersey, United States
  • Jan 30th
AIR COMPRESSOR

AIR COMPRESSOR

  • Cambridge, Vermont, United States
  • Jan 30th
42 Ton Hydraulic Press. GRIMCO. Air over Oil Hydraulics. Heated Platens.

42 Ton Hydraulic Press. GRIMCO. Air over Oil Hydraulics. Heated Platens.

  • Bailey, Michigan, United States
  • Jan 30th
Walter Valenite Spade Drill Xtra-tec indexable insert B4213.UF51.508.Z1.152R-8

Walter Valenite Spade Drill Xtra-tec indexable insert B4213.UF51.508.Z1.152R-8

  • Punta Gorda, Florida, United States
  • Jan 30th
Antique Vintage Unique Rare Industrial Machine Cast Iron Steampunk Salvage

Antique Vintage Unique Rare Industrial Machine Cast Iron Steampunk Salvage

  • Lakewood, Ohio, United States
  • Jan 30th
REGAL 1-3/8"-18 NEF H2 HSG 6FL BOTTOM TAP 0529N71M MACHINIST TOOLS

REGAL 1-3/8"-18 NEF H2 HSG 6FL BOTTOM TAP 0529N71M MACHINIST TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
lathe Armstong No 2 LH tool holder 9/16" x 1-3/8" shank

lathe Armstong No 2 LH tool holder 9/16" x 1-3/8" shank

  • Punta Gorda, Florida, United States
  • Jan 30th
1-64 TAP H1 2FL BOTTOM EDP#10010 BRUBAKER TOOL TAPS QTY-2 MACHINIST TOOLS

1-64 TAP H1 2FL BOTTOM EDP#10010 BRUBAKER TOOL TAPS QTY-2 MACHINIST TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
CDI TORQUE PRODUCTS 1502 TP-1 20-170 IN. LB USED MACHINIST HAND TOOLS

CDI TORQUE PRODUCTS 1502 TP-1 20-170 IN. LB USED MACHINIST HAND TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
HERTEL 3/4"-16 NF HSS-E G H7 BOTTOM FORMING TAP TIN H1810 USA

HERTEL 3/4"-16 NF HSS-E G H7 BOTTOM FORMING TAP TIN H1810 USA

  • Punta Gorda, Florida, United States
  • Jan 30th
6-40 TAPS H2 3FL BRITE UNION HSS TAPER TAP USA QTY-3 MACHINIST TOOLS

6-40 TAPS H2 3FL BRITE UNION HSS TAPER TAP USA QTY-3 MACHINIST TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
5/16"-18 BOTTOMING TAP H3 2FL KENNAMETAL KHSST28318 MACHINIST TOOLS

5/16"-18 BOTTOMING TAP H3 2FL KENNAMETAL KHSST28318 MACHINIST TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
2-56 DIE LEFT HAND 1" OD HS LH ROUND ADJUSTABLE NEW MACHINIST TOOLS

2-56 DIE LEFT HAND 1" OD HS LH ROUND ADJUSTABLE NEW MACHINIST TOOLS

  • Punta Gorda, Florida, United States
  • Jan 30th
CR Industries 12545 Oil Seal

CR Industries 12545 Oil Seal

  • London, Ohio, United States
  • Jan 30th
2 NEW LAMINA STRAIGHT DIE GUIDE PINS 1" 7-1/2" OAL MACHINE PARTS

2 NEW LAMINA STRAIGHT DIE GUIDE PINS 1" 7-1/2" OAL MACHINE PARTS

  • Punta Gorda, Florida, United States
  • Jan 30th
VINTAGE CLAMCO HANDHELD HEAT SEALER MODEL #HS-150-W

VINTAGE CLAMCO HANDHELD HEAT SEALER MODEL #HS-150-W

  • Spokane, Washington, United States
  • Jan 30th
M6 x 1.25 D5 HSS TAP SET OF 3 METRIC 4FL INTERSTATE NEW MACHINIST TOOLMAKER

M6 x 1.25 D5 HSS TAP SET OF 3 METRIC 4FL INTERSTATE NEW MACHINIST TOOLMAKER

  • Punta Gorda, Florida, United States
  • Jan 30th
Dimple Die Tool set Complete dzus,0.5,0.75,1.0,1.25,1.5,1.75,2.0,2.5,3.0 Fab Car

Dimple Die Tool set Complete dzus,0.5,0.75,1.0,1.25,1.5,1.75,2.0,2.5,3.0 Fab Car

  • Murrieta, California, United States
  • Jan 30th

People who viewed this item also vieved

INCONEL 718 .935 INCHES OD X 3 INCHES LONG

INCONEL 718 .935 INCHES OD X 3 INCHES LONG

  • Indianapolis, Indiana, United States
  • Jun 1st
INCONEL 718 8.1" OD X 1.04 " THICK

INCONEL 718 8.1" OD X 1.04 " THICK

  • Indianapolis, Indiana, United States
  • Jun 1st
6061-T6 aluminum Sheet .085 thick 4.75 X 15.88

6061-T6 aluminum Sheet .085 thick 4.75 X 15.88

  • Indianapolis, Indiana, United States
  • Jun 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies