Included Items Item Description Shipping Info Payment Info * Trimble NetRS Base Station Receiver [ID- X1403] * Trimble Zephyr Antenna P/N: 39105-00 [ID- X1361] * Trimble Zephyr Antenna P/N: 39105-00 * Trimble Power / Serial Adapter * QTY. 2 BNC Cables * AC Adapter/Charger * Power Cord * RS232 PC Interface Cable * User Manual On CD-ROM * Hard Carrying Case (G) Condition: Refurbished Warranty: 90 Day Exchange Trimble NetRS GPS Reference Station Receiver w/ Zephyr Antenna Trimble NetRS GPS Reference Station Versatile GPS receiver with advanced communications control The most Powerful cors system available Ideal for a wide range of GPS reference station applications, the Trimble® NetRS® GPS reference station is designed for use with Trimble’s scalable GPS infrastructure solutions and as a Continuously Operating Reference Station (CORS) for geodetic, survey, scientific, high-accuracy GIS and monitoring applications. The Trimble NetRS GPS reference station is ideal for the following applications: monitoring of manmade structures, natural features and subsidence; atmospheric research; survey data generation; and geodetic infrastructure. Scalable GPS infrastructure solutions Trimble provides a portfolio of infrastructure solutions including single reference stations, a network of reference stations, or a Trimble VRS™ (Virtual Reference Station) solution. This scalability allows you to select the best solution for your requirements. Trimble NetRS can be used with Trimble’s GPSBase™, GPSNet™ and RTKNet™ scalable infrastructure software product family. GPSBase is the entry point and meets the needs of companies and organizations that require a single fixed reference station to serve their local area. GPSNet, the next step, enables users to set up a network of reference stations. They can then upgrade to RTKNet and enjoy the benefits of a true Network RTK system with Trimble VRS. Powerful remote management With Internet Protocol (IP) as the primary communications mechanism, Trimble NetRS can be accessed and controlled remotely using simple Internet browsers or Trimble Infrastructure software. The NetRS uses the Linux framework, which allows for extension and customization that is simply not possible with proprietary operating systems. And with the ability to store all configuration settings to a file, you can quickly and identically configure all receivers in the network. Additionally, it is possible to establish a primary configuration with multiple operating modes that can be remotely selected and enabled as necessary. Multiple levels of security ensure controlled access to the receiver’s configuration. Lower Mantenance And Operation Costs Trimble NetRS features extremely rugged construction, low power consumption and dual power ports with intelligent switching. Its advanced communications control makes it easy for you to operate the receiver and manage data from a convenient location—it’s not necessary to have a local computer. Following problems such as power loss, the NetRS receiver can reload its last known configuration settings; this ability eliminates the need to visit remote locations to manually reset the receiver. Trimble NetRS Benfefits: IP as the primary communications mechanism ensures ease of use. The receiver is fully configurable from remote locations Multiple security options for varying levels of user access Low power consumption ensures reliable operation when using a range of power sources—including solar, mains, and battery backup Small size and convenient connector layout makes Trimble NetRS easy to install. Exceptional flexibility in data outputs and logging. Rugged construction allows receiver to be set up and unattended in remote, hostile environments Proven Trimble GPS receiver technology, including Trimble R-Track technology for tracking L2C signals in modernized GPS satellites. Advanced technology protects investment and ensures optimum productivity and performance into the future. Features: Trimble R-Track technology for GPS Modernization An important component in Scalable GPS Infrastructure solutions Easy setup and remote operation using an Internet browser or Trimble software Low power consumption and extreme ruggedness Specifications: Performance Specifications: Trimble R-Track technology for tracking L2 Civil Signal (L2C) Advanced Trimble Maxwell™ Custom Survey GPS Chip High precision multiple correlator for L1 and L2 pseudorange measurements Unfiltered, unsmoothed pseudorange measurements data for low noise, low multipath error, low time domain correlation and high dynamic response Very low noise L1 and L2 carrier phase measurements with <1 mm precision in a 1 Hz bandwidth L1 and L2 Signal-to-Noise ratios reported in dB-Hz Proven Trimble low elevation tracking technology 24 Channels L1 C/A Code, L2C1, L1/L2 Full Cycle Carrier, WAAS/EGNOS support Data Storage Internal Memory 150 MB (3,400 hours) or 950 MB (21,533 hours) of raw data observables based on recording data from satellites at 15 sec epoch Accuracy Static ±5 mm + 0.5 ppm horizontal RMS ±5 mm + 1 ppm vertical RMS Electrical 11–28 V DC external power input with over-voltage protection Power consumption: less than 3 W for NetRS 3.5 W with a Dorne & Margolin choke ring antenna 4.0 W with a Zephyr Geodetic™ antenna Size And Weight Size 22.8 cm W x 6.5 cm H x 14 cm D (9 in W x 2.6 in H x 5.5 in D) Weight 1.6 kg (3.5 lb) Environment Operating temperature –40 °C to +65 °C (–40 °F to +149 °F) Storage temperature –40 °C to +75 °C (–40 °F to +167 °F) Humidity 100% non-condensing Waterproof to IPX5 • Fully sealed from sand, dust and moisture Communication 1 LAN port 1 port with RJ45 connector supports links to 10BaseT/100BaseT networks All functions are performed through a single IP address simultaneously—including web GUI access, FTP file transfer, and RT17 streaming 4 RS232 ports One or more serial ports can be used simultaneously for local CMR or RTCM correction transmission or a remote PPP dial-up through a modem supporting all the same functions that are available through the 10BaseT/100BaseT port Security features HTTPS supporting SSL encryption IP filtering Client authentication for datastreams Configurable ethernet ports for HTTP, HTTPS and FTP Positioning And Outputs 1 Hz, 2 Hz, 5 Hz and 10 Hz positioning, internal logging and data streaming outputs RT-17 outputs CMR, CMR+, BINEX and RTCM 2.1, 2.3 outputs Control Software HTML web browser Internet Explorer 5.0 or later and Netscape 4.78 or later Antenna Option Zephyr Geodetic Certifications Class B Part 15 FCC certification, CE Mark approval, and C-tick approval We will attempt to ship your item(s) within 24 hours after payment has been received. Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you Powers Your Online Marketplace Make order management a breeze with Kyozou eBay Order Management Software
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.