Triple S Excel Ho-iw 110 / 120v Automatic Hand Blower Dryer Wall Mounted

US $80.00

  • Chicago, Illinois, United States
  • Jan 29th
Used working Triple SSS Excel HO-IW 110/120V Hands Off  Automatic Hand Dryer Surface-Mounted Ship lower 48 states.  Product Description CAST Series HO-IW Hands Off Washroom Hand Dryer from Excel Dryer - Die-cast Zinc Alloy, White Epoxy Painted Cover, Automatic, Surface Mount   Fully Automatic Hand Dryers are activated by an infrared sensor when hands are placed under the air outlet. Hands Off® automatic hand dryers utilize a maintenance-free brushless motor, capacitor initiated for quick starts. Vandal-Proof - features include tamper proof bolts and a side mounted heating element which makes the heating element inaccessible through the air outlet. Construction: Dryer Cover HO-IW & HO-IC Models: shall be one piece, heavy-duty, rib-reinforced die-cast zinc alloy. It shall be lightweight, unbreakable, rustproof and all exposed surfaces shall be bright chrome plated or finished with chip-proof, electrostatically applied epoxy, and fastened by two chrome plated tamper-proof bolts to a cast zinc alloy wall plate. The wall plates for surface mounted models shall be equipped with (3) 7/8 (22 mm) diameter holes one of which shall be suitable for use with surface conduit, for ease of wiring. Recessed covers shall be fastened by four flat-head, recessed, tamper- proof bolts to wall box. Wall plate shall be fastened to the wall box by four concealed 1/4 (6mm) mounting bolts, and shall be equipped with two knockouts for ease of wiring. HO-IW & HO-IC Models: shall have a chrome plated, die-cast zinc air outlet which shall be fixed to the blower housing and shall be of a design that will not allow foreign objects to enter the dryer. All internal parts shall be coated according to Underwriters' Laboratories, Inc. requirements. Entire mechanism shall be internally grounded. Mechanism: Motor for 60 Hz units shall be capacitor-initiated, brushless type (for longer life and quiet operation) 1/10 H.P. 3450 R.P.M. with self- lubricating bearings. It shall be insulated by a resilient mounting and shall be protected by a self-resetting thermal switch. Fan shall be a large, single inlet centrifugal type for maximum capacity, and shall deliver 180 C.F.M. Fan shall be mounted directlyon the motor shaft, and fan and motor unit shall be insulated from dryer with a resilient rubber mounting to obtain maximum dampening effect. The heating element is constructed of Nichrome wire and side mounted on the blower housing, thereby being vandal proof. It shall be protected by an automatic resetting thermostat, which shall open whenever air flow is cut off and shall close when flow of air is resumed. It shall produce an air temperature of 145°F/63°C at a 72°F/22°C ambient room temperature at the outlet. The control assembly is activated by an infrared optical sensor located next to the air outlet. The dryer shall operate as long as hands are moving under the air outlet. There is a 90 second lockout feature, if hands are not removed.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes scratches and scuff mark

Directions

Similar products from Other Cleaning Tools & Extendables

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies