+ Post new Ad
TSD/UNIVERSAL ACURA GRIP COLLET CHUCK EXTENSIONS, US $170 – Picture 0
TSD/UNIVERSAL ACURA GRIP COLLET CHUCK EXTENSIONS, US $170 – Picture 0

Tsd/universal Acura Grip Collet Chuck Extensions

US $170

  • Orwell, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
** TSD/UNIVERSAL ACURA GRIP COLLET CHUCK EXTENSIONS ** (7) 1" AG collet chuck extensions p/n: 901040 1 3/8" Acme threaded shanks Includes 4 misc. collets at no cost Condition: (6) USED, GOOD & (1) NEW Total weight: 28 Lbs. / Ref. No: 389  D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PAYMENTS ACCEPTED: Paypal * (Items paid by personal or business checks may take longer to be shipped) Payment is expected within 7 days of the auction closing. Because of past history with winning bidder's non-payments, unless stated that payment will be late for an acceptable reason within a timely manner, we will be forced to leave negative feedback. Although we greatly appreciate buyers that figure out their own shipping, and pay immediately; unfortunately it generally causes problems. Please wait until we send you your invoice to pay. Thank You. SHIPPING & HANDLING: All items below 150 Lbs. will be shipped via " United Parcel Service" (UPS) Ground. Unless other provisions are necessary. We will ship world wide. R.P. Machine is responsible for the initial shipping cost only. All other duties and charges are the responsibility of the buyer. Shipping is calculated via the Ebay shipping calculator, using UPS Ground rate. All items have an additional handling charge which will range from between $2.00 and $20.00 depending on the fragility and special packing needs of your items. We need to know if we will be shipping to a business or residential address so that we may better calculate shipping cost. Items above 150 Lbs. will be shipped via freight carrier. Shipping and handling fees may vary by weight and special materials needs. IN THE EVENT OF A DAMAGED SHIPMENT: If an item should arrive to the winning bidders address broken, an insurance or return claim may be made if the following provisions are met: Pictures taken of the damaged item's box as well as the item itself. So that we know what condition the item was in before its return to our facility. Once you have taken the pictures, please e-mail us at rspalesh@fairpoint.net and report the damage as soon as possible. Steps will then be taken to quickly and efficiently resolve the issue. Note: If you have any questions, please e-mail or call Robert @ (440) 813-0920. Thanks!

Directions

Similar products from Prolongation Tools

ER16 collet chuck 3/4" str. shank & 12 pcs. ER16 collets 1/16" - 13/32" by 16ths

ER16 collet chuck 3/4" str. shank & 12 pcs. ER16 collets 1/16" - 13/32" by 16ths

  • Addison, Illinois, United States
  • Jan 30th
KENNAMETAL SHORT COLLET EXTENSION 1/2" DIAMETER SHANK W/ ASSORTED DA 300 COLLETS

KENNAMETAL SHORT COLLET EXTENSION 1/2" DIAMETER SHANK W/ ASSORTED DA 300 COLLETS

  • Ellington, New York, United States
  • Jan 30th
PAIR OF SHORT COLLET EXTENSIONS 5/8" DIAMETER SHANK W/ COLLETS

PAIR OF SHORT COLLET EXTENSIONS 5/8" DIAMETER SHANK W/ COLLETS

  • Ellington, New York, United States
  • Jan 30th
PAIR OF NEW KENNAMETAL DA-200 SHORT COLLET EXTENSIONS J12DA208250

PAIR OF NEW KENNAMETAL DA-200 SHORT COLLET EXTENSIONS J12DA208250

  • Ellington, New York, United States
  • Jan 30th
Lot Of 3 Used Integral Shank Tap Chuck Extensions 23/64 5/16 1/4

Lot Of 3 Used Integral Shank Tap Chuck Extensions 23/64 5/16 1/4

  • Nampa, Idaho, United States
  • Jan 30th
Erickson LER16M Cap for Collet Tool Holders

Erickson LER16M Cap for Collet Tool Holders

  • Lebanon, Tennessee, United States
  • Jan 30th
SMITH TOOL EXTENDED TAP HOLDERS, 9/16 TAP

SMITH TOOL EXTENDED TAP HOLDERS, 9/16 TAP

  • Orwell, Ohio, United States
  • Jan 30th
JACOBS MFG CO. #834 ETENSION SOCKET 1.89" DIAMETER

JACOBS MFG CO. #834 ETENSION SOCKET 1.89" DIAMETER

  • Apache Junction, Arizona, United States
  • Jan 30th
TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90785

TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90785

  • Orwell, Ohio, United States
  • Jan 30th
TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90542

TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90542

  • Orwell, Ohio, United States
  • Jan 30th
Komet 20106 100mm x 150mm Tool Holder Extension

Komet 20106 100mm x 150mm Tool Holder Extension

  • Brimfield, Illinois, United States
  • Jan 30th
ER11 5/8" SS COLLET EXTENSION W/WRENCH

ER11 5/8" SS COLLET EXTENSION W/WRENCH

  • Newington, Connecticut, United States
  • Jan 30th
JACOBS 30480 573 Capstan Lathe Turret Socket MT NEW E4

JACOBS 30480 573 Capstan Lathe Turret Socket MT NEW E4

  • Saint Louis, Missouri, United States
  • Jan 30th
HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER #CC-25R

HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER #CC-25R

  • Baltimore, MD, United States
  • Jan 30th
RTW CTEPL 12-3 Toolholder

RTW CTEPL 12-3 Toolholder

  • Peoria, Illinois, United States
  • Jan 30th
Kennametal 1187092 NF2 Toolholder Extension

Kennametal 1187092 NF2 Toolholder Extension

  • Peoria, Illinois, United States
  • Jan 30th
Used Integral Shank Tap Chuck Extension, #12 Tap, 4-5/8" Length

Used Integral Shank Tap Chuck Extension, #12 Tap, 4-5/8" Length

  • Bristol, Connecticut, United States
  • Jan 30th
Used Integral Shank Tap Chuck Extension, #10 Tap, 4-5/8" Length

Used Integral Shank Tap Chuck Extension, #10 Tap, 4-5/8" Length

  • Bristol, Connecticut, United States
  • Jan 30th
Used Integral Shank Tap Chuck Extension, #10 Tap, 3-1/8" Length

Used Integral Shank Tap Chuck Extension, #10 Tap, 3-1/8" Length

  • Bristol, Connecticut, United States
  • Jan 30th
Lot of (3) Used Integral Shank Tap Chuck Extensions, #8 Tap, 4-11/16" Length

Lot of (3) Used Integral Shank Tap Chuck Extensions, #8 Tap, 4-11/16" Length

  • Bristol, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

CAT50 Kennametal 1" Boss Face Mill ToolHolder CV50M100200

CAT50 Kennametal 1" Boss Face Mill ToolHolder CV50M100200

  • Lebanon, Tennessee, United States
  • Mar 9th
ERICKSON TOOL CAT 50 cv50rem075662 id.46

ERICKSON TOOL CAT 50 cv50rem075662 id.46

  • Reynoldsburg, Ohio, United States
  • Mar 9th
WARNER SWASEY M-1901 BORING TOOL HOLDER

WARNER SWASEY M-1901 BORING TOOL HOLDER

  • Lake Villa, Illinois, United States
  • Mar 12th
Drian Tool S20U-SCLCR-4, Style L, Boring Bar - RH A7M 55502 / 73310155502

Drian Tool S20U-SCLCR-4, Style L, Boring Bar - RH A7M 55502 / 73310155502

  • Oregon City, Oregon, United States
  • Mar 12th
SET OF 3 INDEXABLE LATHE TOOL HOLDERS 1" SHANK KENNAMETAL DDJNRL & R + INSERTS

SET OF 3 INDEXABLE LATHE TOOL HOLDERS 1" SHANK KENNAMETAL DDJNRL & R + INSERTS

  • Ellington, New York, United States
  • Mar 27th
SET OF 4 HEAVY DUTY INDEXABLE LATHE TOOL HOLDERS 1-1/4" SHANK KENNAMETAL TRW

SET OF 4 HEAVY DUTY INDEXABLE LATHE TOOL HOLDERS 1-1/4" SHANK KENNAMETAL TRW

  • Ellington, New York, United States
  • Mar 27th
Collis Morse Taper MT 3-4 Arbor Extension Machinist Metal Lathe Drill Press Mill

Collis Morse Taper MT 3-4 Arbor Extension Machinist Metal Lathe Drill Press Mill

  • Yorktown, Virginia, United States
  • May 1st
ACCUPRO CAT40 1/4" END MILL HOLDER STK2723

ACCUPRO CAT40 1/4" END MILL HOLDER STK2723

  • Wadley, Alabama, United States
  • May 2nd
New Dodge 3535 x 3-1/2 KW Taper-Lock Bush 117235

New Dodge 3535 x 3-1/2 KW Taper-Lock Bush 117235

  • Zimmerman, Minnesota, United States
  • May 18th
Dodge HE35 x 2-15/16 HE Bushing 206644

Dodge HE35 x 2-15/16 HE Bushing 206644

  • La Salle, Illinois, United States
  • May 19th
TECHNIKS BT 40 3/4" END MILL HOLDER 2-1/2" PROJECTION STK 9227

TECHNIKS BT 40 3/4" END MILL HOLDER 2-1/2" PROJECTION STK 9227

  • Wadley, Alabama, United States
  • May 25th
PARLEC BT 40 5/8" END MILL HOLDER 2.2 PROJECTION STK 9226

PARLEC BT 40 5/8" END MILL HOLDER 2.2 PROJECTION STK 9226

  • Wadley, Alabama, United States
  • May 25th
SANDVIK COROMANT HSK80 HYDRAULIC HOLDER 392.410HM-80 32 118 HSK 80 LOT C12457

SANDVIK COROMANT HSK80 HYDRAULIC HOLDER 392.410HM-80 32 118 HSK 80 LOT C12457

  • Dayton, Ohio, United States
  • May 26th
Schunk 0204065 16MM Diameter 21032603 2803 HSK-100

Schunk 0204065 16MM Diameter 21032603 2803 HSK-100

  • Inwood, Iowa, United States
  • May 27th
Albrecht Keyless Drill Chuck Model 100-J2

Albrecht Keyless Drill Chuck Model 100-J2

  • Hopewell Junction, New York, United States
  • Jun 4th
Albrecht Keyless Precision Drill Chuck 0-1.5 MM (0 - .060 Inch )

Albrecht Keyless Precision Drill Chuck 0-1.5 MM (0 - .060 Inch )

  • Hopewell Junction, New York, United States
  • Jun 4th
Yuasa Quick Change Tap System Holder & Jacobs No. 3A Drill Chuck 1/8" - 5/8" Cap

Yuasa Quick Change Tap System Holder & Jacobs No. 3A Drill Chuck 1/8" - 5/8" Cap

  • Kennedy, New York, United States
  • Jun 4th
BILZ #1 QUICK CHANGE TAP HOLDER WEN 1-40 6X4.9 LOC2332

BILZ #1 QUICK CHANGE TAP HOLDER WEN 1-40 6X4.9 LOC2332

  • Sidney, Ohio, United States
  • Jun 4th
Sunnen K3-A K4-A K5-A ,K8-A, K12-A, K20-A, Honing Mandrel Adapters

Sunnen K3-A K4-A K5-A ,K8-A, K12-A, K20-A, Honing Mandrel Adapters

  • Montebello, California, United States
  • Jun 9th
Sunnen Mandrel & 12-A BL12-A Y12-A Hone Adapter

Sunnen Mandrel & 12-A BL12-A Y12-A Hone Adapter

  • Montebello, California, United States
  • Jun 9th
CARBIDE TIP Brown & Sharpe #9 Spindle Taper Lathe 1/2 Dead Center B&S #9 Tool

CARBIDE TIP Brown & Sharpe #9 Spindle Taper Lathe 1/2 Dead Center B&S #9 Tool

  • Grand Rapids, Michigan, United States
  • Oct 21st
Sauter Live Holder, VDI30, DIN 5480

Sauter Live Holder, VDI30, DIN 5480

  • Hendersonville, Tennessee, United States
  • Oct 21st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies