+ Post new Ad
TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90785, US $130 – Picture 0
TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90785, US $130 – Picture 0

Tsd/universal Ag Collet Chuck Extensions P/n 90785

US $130

  • Orwell, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
** TSD/UNIVERSAL ACURA GRIP COLLET CHUCK EXTENSIONS **   (12) 3/4" AG collet chuck extensions p/n: 90785 1 1/16" Acme threaded shanks Includes 7 misc. collets at no cost Condition: (9) USED, GOOD & (3) NEW Total weight: 21 Lbs. / Ref. No: 392  D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PAYMENTS ACCEPTED: Paypal * (Items paid by personal or business checks may take longer to be shipped) Payment is expected within 7 days of the auction closing. Because of past history with winning bidder's non-payments, unless stated that payment will be late for an acceptable reason within a timely manner, we will be forced to leave negative feedback. Although we greatly appreciate buyers that figure out their own shipping, and pay immediately; unfortunately it generally causes problems. Please wait until we send you your invoice to pay. Thank You. SHIPPING & HANDLING: All items below 150 Lbs. will be shipped via " United Parcel Service" (UPS) Ground. Unless other provisions are necessary. We will ship world wide. R.P. Machine is responsible for the initial shipping cost only. All other duties and charges are the responsibility of the buyer. Shipping is calculated via the Ebay shipping calculator, using UPS Ground rate. All items have an additional handling charge which will range from between $2.00 and $20.00 depending on the fragility and special packing needs of your items. We need to know if we will be shipping to a business or residential address so that we may better calculate shipping cost. Items above 150 Lbs. will be shipped via freight carrier. Shipping and handling fees may vary by weight and special materials needs. IN THE EVENT OF A DAMAGED SHIPMENT: If an item should arrive to the winning bidders address broken, an insurance or return claim may be made if the following provisions are met: Pictures taken of the damaged item's box as well as the item itself. So that we know what condition the item was in before its return to our facility. Once you have taken the pictures, please e-mail us at rspalesh@fairpoint.net and report the damage as soon as possible. Steps will then be taken to quickly and efficiently resolve the issue. Note: If you have any questions, please e-mail or call Robert @ (440) 813-0920. Thanks!

Directions

Similar products from Prolongation Tools

PARLEC HEAVY METAL EXTENSION 1.25" SHANK 14" OAL PC3 PC3E1 (LOC1219B) TS12

PARLEC HEAVY METAL EXTENSION 1.25" SHANK 14" OAL PC3 PC3E1 (LOC1219B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
1/2" Hole 1" Shank 7.4" Extra Length Long End Mill Adapter Cutter Tool Holder

1/2" Hole 1" Shank 7.4" Extra Length Long End Mill Adapter Cutter Tool Holder

  • Grand Rapids, Michigan, United States
  • Jan 30th
ER16 collet chuck 3/4" str. shank & 12 pcs. ER16 collets 1/16" - 13/32" by 16ths

ER16 collet chuck 3/4" str. shank & 12 pcs. ER16 collets 1/16" - 13/32" by 16ths

  • Addison, Illinois, United States
  • Jan 30th
KENNAMETAL SHORT COLLET EXTENSION 1/2" DIAMETER SHANK W/ ASSORTED DA 300 COLLETS

KENNAMETAL SHORT COLLET EXTENSION 1/2" DIAMETER SHANK W/ ASSORTED DA 300 COLLETS

  • Ellington, New York, United States
  • Jan 30th
PAIR OF SHORT COLLET EXTENSIONS 5/8" DIAMETER SHANK W/ COLLETS

PAIR OF SHORT COLLET EXTENSIONS 5/8" DIAMETER SHANK W/ COLLETS

  • Ellington, New York, United States
  • Jan 30th
PAIR OF NEW KENNAMETAL DA-200 SHORT COLLET EXTENSIONS J12DA208250

PAIR OF NEW KENNAMETAL DA-200 SHORT COLLET EXTENSIONS J12DA208250

  • Ellington, New York, United States
  • Jan 30th
Lot Of 3 Used Integral Shank Tap Chuck Extensions 23/64 5/16 1/4

Lot Of 3 Used Integral Shank Tap Chuck Extensions 23/64 5/16 1/4

  • Nampa, Idaho, United States
  • Jan 30th
Erickson LER16M Cap for Collet Tool Holders

Erickson LER16M Cap for Collet Tool Holders

  • Lebanon, Tennessee, United States
  • Jan 30th
SMITH TOOL EXTENDED TAP HOLDERS, 9/16 TAP

SMITH TOOL EXTENDED TAP HOLDERS, 9/16 TAP

  • Orwell, Ohio, United States
  • Jan 30th
JACOBS MFG CO. #834 ETENSION SOCKET 1.89" DIAMETER

JACOBS MFG CO. #834 ETENSION SOCKET 1.89" DIAMETER

  • Apache Junction, Arizona, United States
  • Jan 30th
TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90542

TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90542

  • Orwell, Ohio, United States
  • Jan 30th
TSD/UNIVERSAL ACURA GRIP COLLET CHUCK EXTENSIONS

TSD/UNIVERSAL ACURA GRIP COLLET CHUCK EXTENSIONS

  • Orwell, Ohio, United States
  • Jan 30th
Komet 20106 100mm x 150mm Tool Holder Extension

Komet 20106 100mm x 150mm Tool Holder Extension

  • Brimfield, Illinois, United States
  • Jan 30th
ER11 5/8" SS COLLET EXTENSION W/WRENCH

ER11 5/8" SS COLLET EXTENSION W/WRENCH

  • Newington, Connecticut, United States
  • Jan 30th
JACOBS 30480 573 Capstan Lathe Turret Socket MT NEW E4

JACOBS 30480 573 Capstan Lathe Turret Socket MT NEW E4

  • Saint Louis, Missouri, United States
  • Jan 30th
HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER #CC-25R

HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER #CC-25R

  • Baltimore, MD, United States
  • Jan 30th
RTW CTEPL 12-3 Toolholder

RTW CTEPL 12-3 Toolholder

  • Peoria, Illinois, United States
  • Jan 30th
Kennametal 1187092 NF2 Toolholder Extension

Kennametal 1187092 NF2 Toolholder Extension

  • Peoria, Illinois, United States
  • Jan 30th
Used Integral Shank Tap Chuck Extension, #12 Tap, 4-5/8" Length

Used Integral Shank Tap Chuck Extension, #12 Tap, 4-5/8" Length

  • Bristol, Connecticut, United States
  • Jan 30th
Used Integral Shank Tap Chuck Extension, #10 Tap, 4-5/8" Length

Used Integral Shank Tap Chuck Extension, #10 Tap, 4-5/8" Length

  • Bristol, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

Command C4C5-0032 CT40 DR32 Extended Collet Chuck With 7 Collets

Command C4C5-0032 CT40 DR32 Extended Collet Chuck With 7 Collets

  • Port Saint Lucie, Florida, United States
  • Mar 9th
TECNARA BT40 TENSION COMPRESSION TAPPER W/ 1/4" NPT ADAPTER STOCK #E23

TECNARA BT40 TENSION COMPRESSION TAPPER W/ 1/4" NPT ADAPTER STOCK #E23

  • Cleveland, Ohio, United States
  • Mar 9th
BRAND NEW MITSUBISHI CARBIDE BORING BAR WITH 8 EVEREDE INSERTS KIT

BRAND NEW MITSUBISHI CARBIDE BORING BAR WITH 8 EVEREDE INSERTS KIT

  • United States
  • Mar 12th
MT- 4 stations turning tool holder

MT- 4 stations turning tool holder

  • Berkeley, California, United States
  • Mar 12th
KENNAMETAL DVVNN-164D-KC3 1.00" SHANK TOOL HOLDER

KENNAMETAL DVVNN-164D-KC3 1.00" SHANK TOOL HOLDER

  • Upland, California, United States
  • Mar 26th
SANDVIK TMS16-151.2-242335 1.00" SHANK CUT OFF GROOVE HOLDER

SANDVIK TMS16-151.2-242335 1.00" SHANK CUT OFF GROOVE HOLDER

  • Upland, California, United States
  • Mar 26th
Jancy AE2000 2" Arbor Extension

Jancy AE2000 2" Arbor Extension

  • Davenport, Iowa, United States
  • Apr 26th
NEW TMS SIZE #1 ADAPTER COLLET FOR 5/16" TAP BILZ

NEW TMS SIZE #1 ADAPTER COLLET FOR 5/16" TAP BILZ

  • Cleveland, Ohio, United States
  • Apr 27th
NEW WOODS BUSHING SDS 1-7/8 S SDS178S 1-7/8"

NEW WOODS BUSHING SDS 1-7/8 S SDS178S 1-7/8"

  • Fayetteville, North Carolina, United States
  • May 16th
dodge Taper-Lock Bushing 2517 2-3/16 KW Taper-Lock Bushing

dodge Taper-Lock Bushing 2517 2-3/16 KW Taper-Lock Bushing

  • Fayetteville, North Carolina, United States
  • May 16th
KATO BT50 TAPPING CHUCK HA2035 STK 6286

KATO BT50 TAPPING CHUCK HA2035 STK 6286

  • Wadley, Alabama, United States
  • May 25th
KATO BT50 TAPPING CHUCK HA2035 STK 6287

KATO BT50 TAPPING CHUCK HA2035 STK 6287

  • Wadley, Alabama, United States
  • May 25th
Heimatec 8 210 48 001 Z TOOL HOLDER E2-40x32 HEIMATEC E2-40-32

Heimatec 8 210 48 001 Z TOOL HOLDER E2-40x32 HEIMATEC E2-40-32

  • MUMBAI, MAHARASHTRA, India
  • May 26th
USED DORIAN THREADING-GROOVE MTVOL 12-3B-C HOLDER 3/4'' SQUARE / L HAND / USA

USED DORIAN THREADING-GROOVE MTVOL 12-3B-C HOLDER 3/4'' SQUARE / L HAND / USA

  • Houston, Texas, United States
  • May 26th
Jacob Chuck

Jacob Chuck

  • Jefferson City, Missouri, United States
  • Jun 4th
Craftsman 1/2 " x 20 Spindle Drill Chuck With Key #92980 Rare Tool Sears USA

Craftsman 1/2 " x 20 Spindle Drill Chuck With Key #92980 Rare Tool Sears USA

  • Bethel, Pennsylvania, United States
  • Jun 4th
LOT OF 6 PARLEC BALL DRIVE QUICK CHANGE 80 TAP ADAPTERS & DRILL LOC2345

LOT OF 6 PARLEC BALL DRIVE QUICK CHANGE 80 TAP ADAPTERS & DRILL LOC2345

  • Sidney, Ohio, United States
  • Jun 4th
BILZ #1 ER16 COLLET CHUCK HOLDERS QUICK CHANGE WEI-IKP LOC2344

BILZ #1 ER16 COLLET CHUCK HOLDERS QUICK CHANGE WEI-IKP LOC2344

  • Sidney, Ohio, United States
  • Jun 4th
LOT OF 5 NEW SUNNEN HONE MANDRELS K5-155CH - K5-170CH

LOT OF 5 NEW SUNNEN HONE MANDRELS K5-155CH - K5-170CH

  • Ellington, New York, United States
  • Jun 9th
LOT OF 9 NEW SUNNEN HONE MANDRELS BL3-118CS - BL10-323AH

LOT OF 9 NEW SUNNEN HONE MANDRELS BL3-118CS - BL10-323AH

  • Ellington, New York, United States
  • Jun 9th
AC Servo Motor 750W 2.39N.M Matched Servo Driver with 3M Cable CNC 80ST-M02430

AC Servo Motor 750W 2.39N.M Matched Servo Driver with 3M Cable CNC 80ST-M02430

  • Changzhou,Jiangsu, China
  • Oct 21st
CARBIDE TIP Brown & Sharpe #9 Spindle Taper Lathe 1/2 Dead Center B&S #9 Tool

CARBIDE TIP Brown & Sharpe #9 Spindle Taper Lathe 1/2 Dead Center B&S #9 Tool

  • Grand Rapids, Michigan, United States
  • Oct 21st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies