+ Post new Ad
TTC Expanding Mandrels Diameter : 1/2"- 9/16" Overall Length : 5", US $52.49 – Picture 0
TTC Expanding Mandrels Diameter : 1/2"- 9/16" Overall Length : 5", US $52.49 – Picture 0

Ttc Expanding Mandrels Diameter : 1/2"- 9/16" Overall Length : 5"

US $52.49

  • Flushing, New York, United States
  • Jan 30th
Open on mobile:
QR code
TTC Expanding Mandrels - STANDARD TAPER: Diameter : 1/2"- 9/16" Overall Length : 5" 1/2"- 9/16" EXPANDING MANDREL - TTC Features Made of high grade tool steel. Precision ground and heat treated for maximum concentricity and holding power. Center holes are ground and lapped. The automatic expansion feature can be utilized on any bore (standard or non-standard) within the range of the mandrel. Sizes up to 1" capacity are furnished with 1 sleeve: larger sizes are furnished with 2 sleeves (1 large and 1 small) Arbors are tapered, sleeves are flexible and size is obtained by moving sleeve along arbor. A range from 1/2" thru 2" by 1/1000" can be covered by a total of 8 mandrels. PRODUCT SPECIFICATIONS Unit of Measure each Must Buy 1 Country of Origin Import Shipping Restrictions None Brand PHASE II Description TTC Expanding Mandrels - STANDARD TAPER: Diameter : 1/2"- 9/16" Overall Length : 5" Diameter 1/2"- 9/16" Overall Length 5" Sleeves Furnished 1 Model # EXM-1 Length of Sleeve 2-1/2" Weight 0.23 lbs.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Part Number 330-100
Part Brand PHASE II

Directions

Similar products from Mandrills

424 Mandrel, 1/8" shank for Clasp Polishers Cylinders Rotary Tool Jewelry Dental

424 Mandrel, 1/8" shank for Clasp Polishers Cylinders Rotary Tool Jewelry Dental

  • Brentwood, Tennessee, United States
  • Jan 30th
2 1/2" Diameter Electrical Mandrel

2 1/2" Diameter Electrical Mandrel

  • Las Vegas, Nevada, United States
  • Jan 30th
Lathe Mandrel Ground 1.9/16

Lathe Mandrel Ground 1.9/16

  • Natick, Massachusetts, United States
  • Jan 30th
2 Wheel Mandrels for Dremel Rotary Tool 3/32" shank, 1/16" screw Dental Jewelry

2 Wheel Mandrels for Dremel Rotary Tool 3/32" shank, 1/16" screw Dental Jewelry

  • Brentwood, Tennessee, United States
  • Jan 30th
4 - 424 Mandrels 3/32" shank Polishing Points Clasp Polisher Dremel Rotary tool

4 - 424 Mandrels 3/32" shank Polishing Points Clasp Polisher Dremel Rotary tool

  • Brentwood, Tennessee, United States
  • Jan 30th
SPLIT MANDREL SLOTTED FOR ABRASIVE SANDING USE WITH FOREDOM - DREMEL 1/8" SHANK

SPLIT MANDREL SLOTTED FOR ABRASIVE SANDING USE WITH FOREDOM - DREMEL 1/8" SHANK

  • North Hollywood, California, United States
  • Jan 30th
Sunnen - SC1250 - Honing Mandrel - SC 1250 Hone -

Sunnen - SC1250 - Honing Mandrel - SC 1250 Hone -

  • Lockport, Illinois, United States
  • Jan 30th
Mandrel Injector Pierce NC-3839-B-13

Mandrel Injector Pierce NC-3839-B-13

  • New Paris, Indiana, United States
  • Jan 30th
3" Mandrel Cup Screw On Holder 1/4" ( Lot of 4 ) Partsmaster# 00E88270003 New

3" Mandrel Cup Screw On Holder 1/4" ( Lot of 4 ) Partsmaster# 00E88270003 New

  • Indianapolis, Indiana, United States
  • Jan 30th
Alfing Cracking Mandrel Set NPM 58-528-0362

Alfing Cracking Mandrel Set NPM 58-528-0362

  • Flint, Michigan, United States
  • Jan 30th
SUNNEN KL-962 HONING MANDREL CON-ROD PIN FITTING HONE SHOES STONE 0.962-0.993

SUNNEN KL-962 HONING MANDREL CON-ROD PIN FITTING HONE SHOES STONE 0.962-0.993

  • Hickory, North Carolina, United States
  • Jan 30th
SUNNEN 1.020" HONING MANDREL CON-ROD HONE RANGE 1.020" - 1.062" BUSHING EXPANDER

SUNNEN 1.020" HONING MANDREL CON-ROD HONE RANGE 1.020" - 1.062" BUSHING EXPANDER

  • Hickory, North Carolina, United States
  • Jan 30th
SUNNEN 4PL-1219 HONING MANDREL PISTON/KING PIN FITMENT HONE RANGE 1.209"-1.281 "

SUNNEN 4PL-1219 HONING MANDREL PISTON/KING PIN FITMENT HONE RANGE 1.209"-1.281 "

  • Hickory, North Carolina, United States
  • Jan 30th
MANDREL MINIATURE REINFORCED 1/4" SHANK REINFORCED WITH 1/8" SCREW HEAD HOLDER

MANDREL MINIATURE REINFORCED 1/4" SHANK REINFORCED WITH 1/8" SCREW HEAD HOLDER

  • North Hollywood, California, United States
  • Jan 30th
Diamond Cutting Mandrel

Diamond Cutting Mandrel

  • Fort Worth, Texas, United States
  • Jan 30th
5" EXPANDING MANDREL

5" EXPANDING MANDREL

  • Imlay City, Michigan, United States
  • Jan 30th
4" EXPANDING MANDREL

4" EXPANDING MANDREL

  • Imlay City, Michigan, United States
  • Jan 30th
Sunnen Hone Mandrel 2G-P28-1062 VA (Inv.14879, 20654)

Sunnen Hone Mandrel 2G-P28-1062 VA (Inv.14879, 20654)

  • Portland, Connecticut, United States
  • Jan 30th
Heald ID Grinding Spindle Quill No. 8 BS Mount 1 Inch (Inv.18712)

Heald ID Grinding Spindle Quill No. 8 BS Mount 1 Inch (Inv.18712)

  • Portland, Connecticut, United States
  • Jan 30th
Heald ID Grinding Spindle Quill No. 8 BS Mount 7/8 Dia. (Inv.18714)

Heald ID Grinding Spindle Quill No. 8 BS Mount 7/8 Dia. (Inv.18714)

  • Portland, Connecticut, United States
  • Jan 30th

People who viewed this item also vieved

Cat 50 1-1/4" End Mill Tool holder Erickson C 151069 CNC

Cat 50 1-1/4" End Mill Tool holder Erickson C 151069 CNC

  • Milton Freewater, Oregon, United States
  • Jun 8th
PARLEC CAT40 TG100 COLLET CHUCK MORE TOOLING LISTED CAT 40 TG 100 LOT C12221

PARLEC CAT40 TG100 COLLET CHUCK MORE TOOLING LISTED CAT 40 TG 100 LOT C12221

  • Dayton, Ohio, United States
  • Jun 9th
1 USED 5/16" HEAVY METAL BORING BAR. SCLCR-2. TAKES CCMT INSERT USA MADE {H467}

1 USED 5/16" HEAVY METAL BORING BAR. SCLCR-2. TAKES CCMT INSERT USA MADE {H467}

  • Mentor, Ohio, United States
  • May 24th
NEW 1/2" SOLID CARBIDE BORING BAR C08-SCLCR-2. W/ COOLANT. USES CCMT #2 {Z268}

NEW 1/2" SOLID CARBIDE BORING BAR C08-SCLCR-2. W/ COOLANT. USES CCMT #2 {Z268}

  • Mentor, Ohio, United States
  • May 24th
HEAVY KYSOR-DIJET Indexable Tool Holder #MSBNL-865K4 7" Long 1" X 1 1/2" NOS

HEAVY KYSOR-DIJET Indexable Tool Holder #MSBNL-865K4 7" Long 1" X 1 1/2" NOS

  • Troy, Michigan, United States
  • May 26th
VALENITE MTS VBT25 MODULAR TOOL HOLDER PGTBRD-2550-10

VALENITE MTS VBT25 MODULAR TOOL HOLDER PGTBRD-2550-10

  • Cadiz, Kentucky, United States
  • May 26th
TTC Shell End Mill Arbor - Taper: 50 N.S. ARBOR DIAMETER: 1-1/4''

TTC Shell End Mill Arbor - Taper: 50 N.S. ARBOR DIAMETER: 1-1/4''

  • Duncan, South Carolina, United States
  • May 27th
HOUGEN ''12,000 Series'' Conversion Arbors For Machine Tools. 1'' straight

HOUGEN ''12,000 Series'' Conversion Arbors For Machine Tools. 1'' straight

  • Duncan, South Carolina, United States
  • May 27th
SKF BEARING R3LL

SKF BEARING R3LL

  • North Olmsted, Ohio, United States
  • May 27th
BROWNING B STYLE REBORABLE SPROCKET 25B14

BROWNING B STYLE REBORABLE SPROCKET 25B14

  • North Olmsted, Ohio, United States
  • May 27th
KENNAMETAL BT40 TO MT3 ADAPTER STK9390

KENNAMETAL BT40 TO MT3 ADAPTER STK9390

  • Wadley, Alabama, United States
  • May 29th
USED- VALENITE TOOL HOLDERS MODEL BT40-E125-250-BT40 TAPER

USED- VALENITE TOOL HOLDERS MODEL BT40-E125-250-BT40 TAPER

  • Bloomfield, Connecticut, United States
  • May 29th
H-Type Milling Holder for Mori Seiki NL2500

H-Type Milling Holder for Mori Seiki NL2500

  • Altamonte Springs, Florida, United States
  • Jun 3rd
H-Type Milling Holder for Mazak Multiplex 6250

H-Type Milling Holder for Mazak Multiplex 6250

  • Altamonte Springs, Florida, United States
  • Jun 3rd
11/16 TAP COLLET FOR 11/16" TAP FOR BILZ #2 TMS AND OTHERS TAP ADAPTER D14091

11/16 TAP COLLET FOR 11/16" TAP FOR BILZ #2 TMS AND OTHERS TAP ADAPTER D14091

  • Dayton, Ohio, United States
  • Jun 9th
Criterion Boring Head + Boring Bars + 2 Shanks 3/4" & R8

Criterion Boring Head + Boring Bars + 2 Shanks 3/4" & R8

  • Uxbridge, Massachusetts, United States
  • Jun 9th
DRILL CHUCK----33JTMOUNT----1/2 CAPACITY KEY UNIVERSAL CHUCK WITH KEY

DRILL CHUCK----33JTMOUNT----1/2 CAPACITY KEY UNIVERSAL CHUCK WITH KEY

  • Hanover Park, Illinois, United States
  • Jun 9th
Keyless Drill Chuck, capacity 0-3/8", 1/2-20 Threads, Used

Keyless Drill Chuck, capacity 0-3/8", 1/2-20 Threads, Used

  • St Thomas, Ontario, Canada
  • Jun 9th
Nema 17 2phase 0.3N.m 42ozf.in stepper Motor 42mm frame 5mm shaft 42J1840-408

Nema 17 2phase 0.3N.m 42ozf.in stepper Motor 42mm frame 5mm shaft 42J1840-408

  • DongGuan, China
  • Oct 28th
57mm 600W Air cooled Brushed Spindle Motor + Mount Bracket + Speed controller

57mm 600W Air cooled Brushed Spindle Motor + Mount Bracket + Speed controller

  • Guangzhou , China
  • Oct 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies