+ Post new Ad
TTC Hex for 5C Collets - Size: Hex, US $27.99 – Picture 0
TTC Hex for 5C Collets - Size: Hex, US $27.99 – Picture 1
TTC Hex for 5C Collets - Size: Hex, US $27.99 – Picture 2
TTC Hex for 5C Collets - Size: Hex, US $27.99 – Picture 0
TTC Hex for 5C Collets - Size: Hex, US $27.99 – Picture 1
TTC Hex for 5C Collets - Size: Hex, US $27.99 – Picture 2

Ttc Hex For 5c Collets - Size: Hex

US $27.99

  • Flushing, New York, United States
  • Jan 30th
Open on mobile:
QR code
TTC Hex for 5C Collets - Size: Hex HEX FOR 5C COLLETS - TTC ?Collet Not Included. Applications Designed for the popular 5C round, hex or square collet. An effective short run jig for machining parallel, square or hex shapes as well as cross hole drilling at 60°, 90° or 120°. Blocks can be held directly on a magnetic chuck or in a machine vise. Features Each block weighs 1 lb. and dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long. Capacity: 1/16" thru 1-1/8" Made of high quality tool steel, hardened. Precision ground, parallel and square to within .0005". Benefits For simplified set-ups on drill presses, milling machines, lathes and surface grinders. Quick acting collet closer (#CB5L) is interchangeable on either collet block. PRODUCT SPECIFICATIONS Unit of Measure each Must Buy 1 Country of Origin Import Shipping Restrictions None Brand TTC Description TTC Hex for 5C Collets - Size: Hex Price Table Description Hex for 5C Collets Size Square Model # CB5-H Capacity 1/16" thru 1-1/8" Dimensions 1-3/4" x 1-3/4" x 2-3/4" Height 2-3/4" Length 1-3/4" Parallel .0005" Weight 1.34 lbs. Width 1-3/4"
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Part Number 69-001-008
Part Brand TTC

Directions

Similar products from Collet Chucks & Sets

3 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 1/8, 15/64, 13/32

3 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 1/8, 15/64, 13/32

  • Euclid, Ohio, United States
  • Jan 30th
4 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 3/64, 5/64, 9/64, 7/32

4 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 3/64, 5/64, 9/64, 7/32

  • Euclid, Ohio, United States
  • Jan 30th
4 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 9/64, 13/32, 17/64, 15/3

4 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 9/64, 13/32, 17/64, 15/3

  • Euclid, Ohio, United States
  • Jan 30th
4 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 1/8, 9/64, 5/32, 9/32

4 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 1/8, 9/64, 5/32, 9/32

  • Euclid, Ohio, United States
  • Jan 30th
3 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 5/32, 11/64, 3/8

3 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 5/32, 11/64, 3/8

  • Euclid, Ohio, United States
  • Jan 30th
4 MIXED LYNDEX DA200 COLLET CHUCKS, SHANK: BT30, .0141, .0156, .0187

4 MIXED LYNDEX DA200 COLLET CHUCKS, SHANK: BT30, .0141, .0156, .0187

  • Euclid, Ohio, United States
  • Jan 30th
3 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 1/16, 3/16, 1/8

3 MIXED LYNDEX DA100 COLLET CHUCKS, SHANK: BT30, 1/16, 3/16, 1/8

  • Euclid, Ohio, United States
  • Jan 30th
Machinist tools,yuasa 5C collet index head,milling machine head

Machinist tools,yuasa 5C collet index head,milling machine head

  • Bennington, New Hampshire, United States
  • Jan 30th
SJOGREN HARDINGE 2J COLLET SPEED CHUCK MONARCH EE D1-3 MOUNT

SJOGREN HARDINGE 2J COLLET SPEED CHUCK MONARCH EE D1-3 MOUNT

  • Coloma, Wisconsin, United States
  • Jan 30th
HARDINGE SJOGREN No.22 COLLET CHUCK PLAIN BACK

HARDINGE SJOGREN No.22 COLLET CHUCK PLAIN BACK

  • Coloma, Wisconsin, United States
  • Jan 30th
T&O ER-16 Collet Chuck - Taper: 3/4" Straight Shank Shank Length:6"

T&O ER-16 Collet Chuck - Taper: 3/4" Straight Shank Shank Length:6"

  • Flushing, New York, United States
  • Jan 30th
T&O ER-40 Spring Collet Chuck Holder - Taper: 3 MT COLLET SIZE: ER-40

T&O ER-40 Spring Collet Chuck Holder - Taper: 3 MT COLLET SIZE: ER-40

  • Flushing, New York, United States
  • Jan 30th
T&O ER-16 Collet Chuck - Taper: R8 COLLET SIZE: ER-16

T&O ER-16 Collet Chuck - Taper: R8 COLLET SIZE: ER-16

  • Flushing, New York, United States
  • Jan 30th
BISON GFI/ER Floating Reamer Collet Chuck - 1-1/4" Straight Shank - Size: ER25

BISON GFI/ER Floating Reamer Collet Chuck - 1-1/4" Straight Shank - Size: ER25

  • Flushing, New York, United States
  • Jan 30th
JACOBS #92 LEVER OPERATED LATHE COLLET CHUCK W/FULL SET COLLETS LO SPINDLE

JACOBS #92 LEVER OPERATED LATHE COLLET CHUCK W/FULL SET COLLETS LO SPINDLE

  • Carbondale, Pennsylvania, United States
  • Jan 30th
Machinist tools,5C spin indexer,milling machine fixture

Machinist tools,5C spin indexer,milling machine fixture

  • Bennington, New Hampshire, United States
  • Jan 30th
3 CARBOLOY & COLLIS DA200 COLLET CHUCKS w/ CAT40 SHANKS

3 CARBOLOY & COLLIS DA200 COLLET CHUCKS w/ CAT40 SHANKS

  • Covina, California, United States
  • Jan 30th
PRATT BURNERD D1-5 6" 4 JAW FLAT BACK MOUNT INDEPENDENT CHUCK 0614400

PRATT BURNERD D1-5 6" 4 JAW FLAT BACK MOUNT INDEPENDENT CHUCK 0614400

  • Roanoke, Virginia, United States
  • Jan 30th
HARDINGE SJORGEN 2J COLLET CHUCK 2AD3 BACK

HARDINGE SJORGEN 2J COLLET CHUCK 2AD3 BACK

  • Santa Cruz, California, United States
  • Jan 30th
Erickson Collet Chucks

Erickson Collet Chucks

  • Apache Junction, Arizona, United States
  • Jan 30th

People who viewed this item also vieved

USED BILZ #2 TAP ADAPTER COLLET POSI-DRIVE TAP SIZE 3/8" H.T.

USED BILZ #2 TAP ADAPTER COLLET POSI-DRIVE TAP SIZE 3/8" H.T.

  • Fairfield, Iowa, United States
  • May 24th
USED BILZ #3 TAP ADAPTER COLLET POSI-DRIVE TAP SIZE 3/4" PIPE

USED BILZ #3 TAP ADAPTER COLLET POSI-DRIVE TAP SIZE 3/4" PIPE

  • Fairfield, Iowa, United States
  • May 24th
Bridgeport #2 Morse 1/10" Collet

Bridgeport #2 Morse 1/10" Collet

  • Ansonia, Connecticut, United States
  • May 24th
CLAMP-TITE 8A104 Collars & Couplings - Outside Diameter: 2-1/16'

CLAMP-TITE 8A104 Collars & Couplings - Outside Diameter: 2-1/16'

  • Duncan, South Carolina, United States
  • May 24th
Suburban PAW-020202 Machined Angle Plate - DIMENSIONS: 2'x 2'x 2'

Suburban PAW-020202 Machined Angle Plate - DIMENSIONS: 2'x 2'x 2'

  • Duncan, South Carolina, United States
  • May 24th
SUBURBAN Open End Slotted Angle Plate #SAO060504 dim. (Inch) 6''x 5'' x 4-1/2''

SUBURBAN Open End Slotted Angle Plate #SAO060504 dim. (Inch) 6''x 5'' x 4-1/2''

  • Duncan, South Carolina, United States
  • May 24th
Kant Twist 411 Quick Acting Hold Down Clamp without Base Plate, 3" Holding Size,

Kant Twist 411 Quick Acting Hold Down Clamp without Base Plate, 3" Holding Size,

  • USA, United States
  • May 25th
Lab Retort Clamp with BossHead for chamistry lab, Flask Holding Clamp pack of 8

Lab Retort Clamp with BossHead for chamistry lab, Flask Holding Clamp pack of 8

  • AMBALA, HARYANA, India
  • May 25th
Lab Retort Clamp with BossHead forchemistry lab, Flask Holding Clamp pack of 8

Lab Retort Clamp with BossHead forchemistry lab, Flask Holding Clamp pack of 8

  • AMBALA, HARYANA, India
  • May 25th
QUALITY SWISS MADE NEW UNUSED MASTER SHANK ARBOUR CHUCK MILLING DRILL LATHE

QUALITY SWISS MADE NEW UNUSED MASTER SHANK ARBOUR CHUCK MILLING DRILL LATHE

  • BROMYARD, Herefordshire, United Kingdom
  • May 26th
HARTFORD 3 JAW CHUCK 8" 8236D6 SUPER SPACER (8337)

HARTFORD 3 JAW CHUCK 8" 8236D6 SUPER SPACER (8337)

  • Chicago, Illinois, United States
  • May 26th
12" CNC CINCINNATI MILACRON MACHINE 3 JAW CHUCK

12" CNC CINCINNATI MILACRON MACHINE 3 JAW CHUCK

  • Chicago, Illinois, United States
  • May 26th
New Dorian CNC threaded 4MT Dead Center

New Dorian CNC threaded 4MT Dead Center

  • Schuylkill Haven, Pennsylvania, United States
  • May 27th
Miyano S10 Collet Adapter Chuck for BNC-20 CNC Turning Center Lathe

Miyano S10 Collet Adapter Chuck for BNC-20 CNC Turning Center Lathe

  • Millstone Township, New Jersey, United States
  • May 27th
LIVE CENTER / REVOLVING CENTER : 1MT MULTIPOINT WITH SEVEN INTERCHANGEABLE TIPS

LIVE CENTER / REVOLVING CENTER : 1MT MULTIPOINT WITH SEVEN INTERCHANGEABLE TIPS

  • DELHI, DELHI, India
  • May 27th
7/8" HEX MILLING MACHINE SPEED HANDLE STEEL VISE LATHE MILL NEW

7/8" HEX MILLING MACHINE SPEED HANDLE STEEL VISE LATHE MILL NEW

  • Coloma, Wisconsin, United States
  • May 27th
NICE USA MADE PALMGREN NO 40BK 4 " MACHINE VISE

NICE USA MADE PALMGREN NO 40BK 4 " MACHINE VISE

  • California, United States
  • May 27th
Dayton 8" Quick Grip/Release Vise 4YG29 4YG29D 8 inch

Dayton 8" Quick Grip/Release Vise 4YG29 4YG29D 8 inch

  • La Grange, Illinois, United States
  • May 27th
IAR 5M36SS19 33L IN X 36IN. W IN 5MESH 19GA. 304 STAINLESS WOVEN WIRE MESH

IAR 5M36SS19 33L IN X 36IN. W IN 5MESH 19GA. 304 STAINLESS WOVEN WIRE MESH

  • Vallejo, California, United States
  • Jun 4th
Parlec c40-50em2 weldon style end mill holder coolant through 1/2"id cat40

Parlec c40-50em2 weldon style end mill holder coolant through 1/2"id cat40

  • Middlebury, Indiana, United States
  • Jun 4th
Right hand CNC quick change tool holder w/jetstream ciks12r8 coolant through

Right hand CNC quick change tool holder w/jetstream ciks12r8 coolant through

  • Middlebury, Indiana, United States
  • Jun 4th
84" x 84" Machine Tool Research T-Slotted Servo Driven Power Rotary Table

84" x 84" Machine Tool Research T-Slotted Servo Driven Power Rotary Table

  • Huntington Park, California, United States
  • Jun 7th
TSUDAKOMA RNCM-250R 10" CNC MILL 4TH AXIS ROTARY TABLE & TAILSTOCK FOR VMC

TSUDAKOMA RNCM-250R 10" CNC MILL 4TH AXIS ROTARY TABLE & TAILSTOCK FOR VMC

  • Covina, California, United States
  • Jun 7th
36" x 60" Farmington Air Lift Rotary Indexing Table

36" x 60" Farmington Air Lift Rotary Indexing Table

  • Granger, Iowa, United States
  • Jun 7th
STEEL PARALLELS

STEEL PARALLELS

  • Saint Charles, Illinois, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Machinist Lot of Toolmakers Blocks and Fixtures

MACHINIST TOOLS LATHE MILL Machinist Lot of Toolmakers Blocks and Fixtures

  • Morris Plains, New Jersey, United States
  • Jun 9th
Pair Of Tool Maker V- Block Off /Set / 3" X 3" X 5 1/8" Lg.

Pair Of Tool Maker V- Block Off /Set / 3" X 3" X 5 1/8" Lg.

  • Yorktown, Indiana, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies