Tube Notcher By Affordable Bender Pipe Tubing Bender

US $189.00

Placentia, California, United States
Jan 31st

Open on mobile:
QR code

RACE CAR TUBING NOTCHER Made By Affordable Bender 100% Made in USA Simple to Use - The Affordable Bender Tube Notcher may be mounted in a drill press or simply clamped in a vise and used with a 1/2" hand drill. It can be mounted vertically to mount in your drill press or mill or horizontally to mount to your welding table. The 1/2" hand drill setup is by far the best in our opinion. In this way the Affordable Bender Tube Notcher can be laid horizontal and when notching 45 degree angles the floor will not interfere with the tubing being notched. Also, since the hand drill is fed in horizontally, the drill's weight doesn't try to force the hole saw in too fast. CNC Machined Steel Shaft & Rigid Bearing Block - This is the most critical part of a hole saw style notcher. The Affordable Bender Tube Notcher utilizes a CNC machined, heat treated, rockwell hardened and precision ground steel shaft riding in a bearing block incorporating twin needle bearings and separate grease seals for maximum rigidity and reliability. Adjustable Tube Clamp - The cradle assembly has been designed to be tough, accurate and easy to use. By CNC machining the V-Block, and Clamp assembly small diameter tubing can be notched easily. Machining the clamp mechanism from a solid block of steel eliminates the problems of tube walk in notchers that use a U-strap. Finishing -The Affordable Bender Tube Notcher components have been powder coated, zinc plated , or anodized to ensure years of service and easy cleanup after use. All hardware is grade 8. This unit is built to last and provide years of quality service. Specifications: Tube capacity 3/4" to 2" O.D. 3/4" ground and polished stainless steel shaft 3/4" I.D. double-sealed bearings(2 Each for superior wear and precision notching) Angle notches 0 - 50 degrees Uses standard bi-metal hole saws Threaded arbor adaptor included Here's an Actual Quote from a Satisfied Customer My first comment is your pictures on Ebay could be better! I bought the tool based on what you said and not by the pictures. Strongly suggest you replace them! I like to see the tool vertically not horizontal. How about some close up shots? The tool is far better than what I was expecting. Every part is precisely made and a great deal of attention is made to each and every part. Each part is coated or polished. Easy to use a square to align the tube holder to the drill shaft at 90 degrees. The tube holder easily holds the tube without slipping. I was concerned with other designs that the tube would slip. Not with this tool. The handle makes it easy to clamp the tube with one hand while holding the tube with the other hand. My first cuts were with a 1 1/8 tube, 1/8 thick, 4 inches long. The 1 1/8 hole saw cut it precisely, no slop in the cut. The tool kept the hole saw in proper alignment. I highly recommend this tool. Bryan S. If you have any questions feel free to give us a call or text at 307-709-7000 Thanks Affordable Bender

Condition:	New	Warranty	Yes
Part Brand	Affordable Bender