Tubing Polyethylene 1/4" Nsf 300 Meter Blue Reverse Osmosis Rodi Filter Reef

US $49.95

Daytona Beach, Florida, United States
Jan 30th

Open on mobile:
QR code

Presents our eBay Store About us Payment options Shipping policy Return policy Waranty QC fittings Booster pumps Chloramines Reverse Osmosis Deionization About Ph When installing an RO system or developing an auto top off system one of the problems most people run into is not having enough hose. They buy all the components,fittings and gadgets and when its actually time for the "Big Install" you come to find out you dont have enough hose to do it the way you planned. These are 50 foot continuous runs of 1/4 inch polyethylene tubing. Buy as many as you need and pay shipping only once! H20 Science has you covered! Our tubing provides the benefits of a wide range of temperature and pressure suitability, broad chemical compatibility and is made from non contaminating materials. Common applications are in water purification, water conditioners, ice makers and misting systems. LLDPE is more robust than traditional low or medium density polyethylene and is recommended for use with cold and intermittent hot water. Our tubing is made from FDA approved materials and is NSF International certified. John Guest Polyethylene tubing is designed for use with John Guest Super Speedfit push-in fittings, John Guest Shut-Off Valves and virtually all standard tubing connectors. Food Quality This tubing is produced in Food and Drug Administration (FDA) approved materials and are therefore recommended for food quality applications. Chemical resistance For use of with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. Pneumatics applications John Guest LLDPE tube is suitable for pneumatic applications providing pressure is maximum 10 bar @ 20°C (150psi @ 70°F). At elevated temperatures (50°C+) mineral oil will degrade LLDPE tube and, therefore, LLDPE tube used in pneumatic circuits should be periodically checked and replaced if necessary. John Guest products generally require little maintenance but as a minimum we recommend routine visual inspection. Frequency of visual inspection will depend on severity of application and risk of failure. If after visual inspection John Guest products appear damaged, cracked, charred, discolored, heat distorted or corroded they should be replaced. Any product that is or appears to be leaking should be replaced. Product life is affected by the severity of the application, the hostility of the working environment and contact with aggressive chemicals or liquids. It is therefore important that specific replacement intervals be considered by specifiers/users/customers based on previous service life or when failure could result in unacceptable downtime, damage or injury risk. 300 Meter - 1/4" polyethylene tubing apx. 1000' Available colors: Blue SquareTrade © AP6.0

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Country/Region of Manufacture

Taiwan