+ Post new Ad
Tungsten Carbide Scrap End Mills 2702 Grams, US $250 – Picture 0
Tungsten Carbide Scrap End Mills 2702 Grams, US $250 – Picture 0

Tungsten Carbide Scrap End Mills 2702 Grams

US $250

  • Salt Lake City, Utah, United States
  • Jun 19th
Open on mobile:
QR code
Used tungsten carbide end mills for scrap, recycle or regrind Weight is 2702 grams (almost 6 pounds) Shipping is $6.40 to the US states only! Thanks for viewing!

Directions

Similar products from Solid Carbide Drill Bits

3/8" DORMER SOLID CARBIDE STUB DRILLS, Lot Of 5

3/8" DORMER SOLID CARBIDE STUB DRILLS, Lot Of 5

  • Corona, California, United States
  • Jun 19th
GUHRING .366" (9,300mm) Solid Carbide Drills. Lot Of 4

GUHRING .366" (9,300mm) Solid Carbide Drills. Lot Of 4

  • Corona, California, United States
  • Jun 19th
Accupro - 3/4 Inch Diameter, 3-1/4 Inch Length of Cut, 5 Flutes, Solid Carbide

Accupro - 3/4 Inch Diameter, 3-1/4 Inch Length of Cut, 5 Flutes, Solid Carbide

  • Nogales, Arizona, United States
  • Jun 19th
Accupro - 1/4 Inch Diameter, 1-1/4 Inch Length of Cut, 3 Flutes, Solid Carbide

Accupro - 1/4 Inch Diameter, 1-1/4 Inch Length of Cut, 3 Flutes, Solid Carbide

  • Nogales, Arizona, United States
  • Jun 19th
Accupro - 3/4 Inch Diameter, 1-1/2 Inch Length of Cut, 3 Flutes, Solid Carbide

Accupro - 3/4 Inch Diameter, 1-1/2 Inch Length of Cut, 3 Flutes, Solid Carbide

  • Nogales, Arizona, United States
  • Jun 19th
Accupro - 5/16 Inch Diameter, 1/2 Inch Length of Cut, 3 Flutes, Solid Carbide Si

Accupro - 5/16 Inch Diameter, 1/2 Inch Length of Cut, 3 Flutes, Solid Carbide Si

  • Nogales, Arizona, United States
  • Jun 19th
Accupro - 1/4 Inch Diameter, 1-1/4 Inch Length of Cut, 5 Flutes, Solid Carbide S

Accupro - 1/4 Inch Diameter, 1-1/4 Inch Length of Cut, 5 Flutes, Solid Carbide S

  • Nogales, Arizona, United States
  • Jun 19th
Accupro - 1/8 Inch Diameter, 1/2 Inch Length of Cut, 5 Flutes, Solid Carbide

Accupro - 1/8 Inch Diameter, 1/2 Inch Length of Cut, 5 Flutes, Solid Carbide

  • Nogales, Arizona, United States
  • Jun 19th
Accupro - 3/8 Inch Diameter, 1 Inch Length of Cut, 5 Flutes, Solid Carbide

Accupro - 3/8 Inch Diameter, 1 Inch Length of Cut, 5 Flutes, Solid Carbide

  • Nogales, Arizona, United States
  • Jun 19th
Accupro - 1/2 Inch Diameter, 2 Inch Length of Cut, 5 Flutes, Solid Carbide Singl

Accupro - 1/2 Inch Diameter, 2 Inch Length of Cut, 5 Flutes, Solid Carbide Singl

  • Nogales, Arizona, United States
  • Jun 19th
HEC375S4088 KENNAMETAL SOLID CARBIDE ENDMILL D= 0.375 Z=4 kc635m

HEC375S4088 KENNAMETAL SOLID CARBIDE ENDMILL D= 0.375 Z=4 kc635m

  • Minneapolis, Minnesota, United States
  • Jun 19th
Lot 5 GARR Tool 425M 33010 1/8" 2 Flute Square Double End Mill Solid Carbide New

Lot 5 GARR Tool 425M 33010 1/8" 2 Flute Square Double End Mill Solid Carbide New

  • Oxnard, California, United States
  • Jun 18th
*ORIGINAL* YG1, DREAM DRILLS 11,5mm, DH424115 5xD, without coolant holes

*ORIGINAL* YG1, DREAM DRILLS 11,5mm, DH424115 5xD, without coolant holes

  • Trencin, default, Slovakia
  • Jun 18th
YG1, DREAM DRILLS 10 mm, DH424100 5xD, Original pack(1PCS)

YG1, DREAM DRILLS 10 mm, DH424100 5xD, Original pack(1PCS)

  • Trencin, Slovakia
  • Jun 18th
New Sumitomo Electric MDS112LHV Carbide Drill

New Sumitomo Electric MDS112LHV Carbide Drill

  • Ames, Iowa, United States
  • Jun 18th
SANDVIK CORODRILL R840-0680-50-A1A 1220 Cool Fed Drill

SANDVIK CORODRILL R840-0680-50-A1A 1220 Cool Fed Drill

  • Murphy, North Carolina, United States
  • Jun 18th
SANDVIK CORODRILL REC840063570 A1A 1220 6.35mm Carbide Titanium Drill

SANDVIK CORODRILL REC840063570 A1A 1220 6.35mm Carbide Titanium Drill

  • Murphy, North Carolina, United States
  • Jun 18th
HYPRO CARB HP243-3583 9.10mm Stub Drill Tialn Coated Coolant Thru Drill

HYPRO CARB HP243-3583 9.10mm Stub Drill Tialn Coated Coolant Thru Drill

  • Murphy, North Carolina, United States
  • Jun 18th
Widia / Hanita 3105272 5/8" x 5/8" X 1 1/4" X 3 1/2", R.03 Solid Carbide

Widia / Hanita 3105272 5/8" x 5/8" X 1 1/4" X 3 1/2", R.03 Solid Carbide

  • Houma, Louisiana, United States
  • Jun 18th
SOLID CARBIDE CENTER DRILL #6 - 82 Degree inc -USA- ( centerdrill )

SOLID CARBIDE CENTER DRILL #6 - 82 Degree inc -USA- ( centerdrill )

  • Deerfield Beach, Florida, United States
  • Jun 18th

People who viewed this item also vieved

Dormer 11.50mm R573 Deep Hole Drill Bit Coolant USED

Dormer 11.50mm R573 Deep Hole Drill Bit Coolant USED

  • Chillicothe, Missouri, United States
  • Jan 30th
5mm Drill M804-0050 George Whalley

5mm Drill M804-0050 George Whalley

  • Sherwood, Oregon, United States
  • Jan 30th
19/32" Drill CFT 804-012 George Whalley -- Thru spindle coolant / oil

19/32" Drill CFT 804-012 George Whalley -- Thru spindle coolant / oil

  • Grand Ledge, Michigan, United States
  • Jan 30th
PRECISION TWIST DRILL 18.5 MM HSS (0.7283") DIA - TAPER LENGTH P/N 057185 5ATL

PRECISION TWIST DRILL 18.5 MM HSS (0.7283") DIA - TAPER LENGTH P/N 057185 5ATL

  • Blythewood, South Carolina, United States
  • Jan 30th
Triumph Twist Drill T1290, 1/2" Extra Length Drill Bit

Triumph Twist Drill T1290, 1/2" Extra Length Drill Bit

  • Chillicothe, Missouri, United States
  • Jan 30th
31/32", HSS, Extra Length Drill Bit - USA

31/32", HSS, Extra Length Drill Bit - USA

  • Chillicothe, Missouri, United States
  • Jan 30th
(12) 9/32 x 6-1/4" Chicago Latrobe Straight Shank Taper Length Drill Bit - NEW

(12) 9/32 x 6-1/4" Chicago Latrobe Straight Shank Taper Length Drill Bit - NEW

  • Pittston, Pennsylvania, United States
  • Jan 30th
dewalt 19 piece heavy duty drill bit set jobbers length 1/2 to 1/16

dewalt 19 piece heavy duty drill bit set jobbers length 1/2 to 1/16

  • Bakersfield, California, United States
  • Jan 30th
24 TWIST DRILL BITS 3/8~17/64 Jobber Length Round Shank High Speed Steel USA

24 TWIST DRILL BITS 3/8~17/64 Jobber Length Round Shank High Speed Steel USA

  • Burlington, Kentucky, United States
  • Jan 30th
Irwin 60440 5/8" x 12" Long Boy Drill Bit HSS 1/2" Shank

Irwin 60440 5/8" x 12" Long Boy Drill Bit HSS 1/2" Shank

  • Kansas City, Missouri, United States
  • Jan 30th
8 HSS Weldon Assorted Counterbores #10, 5/16", 3/8", 1/2", -- Made in USA

8 HSS Weldon Assorted Counterbores #10, 5/16", 3/8", 1/2", -- Made in USA

  • Cape Coral, Florida, United States
  • Jan 30th
USED WAUKESHA SERIES "C" #4MT TAPER SHANK SPADE BLADE HOLDER C-13261

USED WAUKESHA SERIES "C" #4MT TAPER SHANK SPADE BLADE HOLDER C-13261

  • Fairfield, Iowa, United States
  • Jan 30th
18 NEW 1/2" Champion HD Screw Machine Drills 135 Deg Split Point 3/8" Shank USA

18 NEW 1/2" Champion HD Screw Machine Drills 135 Deg Split Point 3/8" Shank USA

  • Baton Rouge, Louisiana, United States
  • Jan 30th
LAWSON - 56266 - 3/8" SOLID CARBIDE STRAIGHT FLUTE DRILL BIT

LAWSON - 56266 - 3/8" SOLID CARBIDE STRAIGHT FLUTE DRILL BIT

  • Fort Myers, Florida, United States
  • Jan 30th
1 new NACHI 23/64" 3XD 7573P Screw Machine Length SG Twist Drill ESS performance

1 new NACHI 23/64" 3XD 7573P Screw Machine Length SG Twist Drill ESS performance

  • United States
  • Jan 30th
UTD MORSE TAPER DRILL BIT 1 11/32 X 14 3/4 (L) HIGH SPEED LATHE MILL #25

UTD MORSE TAPER DRILL BIT 1 11/32 X 14 3/4 (L) HIGH SPEED LATHE MILL #25

  • Tonawanda, New York, United States
  • Jan 30th
NATIONAL MORSE TAPER DRILL BIT 29/32 X 8 1/2 (L) HIGH SPEED LATHE MILL #33

NATIONAL MORSE TAPER DRILL BIT 29/32 X 8 1/2 (L) HIGH SPEED LATHE MILL #33

  • Tonawanda, New York, United States
  • Jan 30th
NATIONAL MORSE TAPER DRILL BIT 1 39/64 X 14" (L) HIGH SPEED LATHE MILL #29

NATIONAL MORSE TAPER DRILL BIT 1 39/64 X 14" (L) HIGH SPEED LATHE MILL #29

  • Tonawanda, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies