US $10.50
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Type | Drill Bits |
Country of Manufacture | China |
Directions
Similar products from Other Drilling Tools
Titex 10MM Left Hand Parabolic Screw Machine Drill Bit, A2258-10
Titex 3.66MM Parabolic Screw Machine Drill Bits
Guhring 8.61MM (.339") Left Hand Parabolic Screw Machine Drill Bit, 26316
SE ModularKennametal Drill KSEMO734R3SSF075
KEO #10200 #2 Combined Drill and Countersink HSS USA
NEW - RIDGID R82015 1/2 INCH CORDLESS DRILL KIT
TAPERED SHANK DRILL BIT-21/32 HS-KSD JAPAN--
10pcs Tungsten steel PCB Print Circuit Board Drill Bits Set 1.9mm for CNC / PCB
Eastwood Carbide Burr, Cylinder Shape w/ Radius Shank SA-1L6
MORSE 15/16" DRILL BIT--No. 3 MORSE TAPER---
CLE LINE HS DRILL BIT-25/32"-No.2 MORSE TAPER--
2 New Guhring 11814496 Carbon Step Drills
"PTD" Twist Drill Bit, 11/32",
"PDT" Twist Drill Bits 1/16", lot of 9 Pcs
Chicago Latrobe Drill Bits NO 150 GENERAL PURPOSE 44010 5/32 ONLY 11 IN PACKET
Reduced Shank Twist Drill Bit, 1-3/8"
LOT of (4) EXTRA LONG HSS DRILL BITS, 52" to 66-1/2" LONG! / 5/8, 1-1/8, 1-3/16,
People who viewed this item also vieved
3/4" Step Reamer 53/64 cutter Ream Tool 19mm plus metric over under size 23/32
9/64 Solid Carbide Chucking Reamer cutter 3.56mm Metric cut Ream Tool Tin coated
21/64 Solid Carbide Chucking Reamer cutter 8.4mm Step pilot Ream Tool Tin coated
Brand New TRW 1 3/4" Drill Bit . Brand New! LOOK! Check it out!
Machinist tool tools Long Series Drill Set HSS Multiple Sizes From #23 to 7/16"
TAPER SHANK 33/64" X 6.75" DRILL BIT HIGH SPEED NATIONAL DETROIT
10 Pcs Solid Carbide Micro Drill Set 1.30 - 1.55mm 0323
2.45mm - .0965" Carbide Drill Bit - NEW One Piece - CNC Dremel PCB Hobby Models
2.40mm - .0945" Carbide Drill Bit - NEW One Piece - CNC Dremel PCB Hobby Models
4 PIECE 1 MORSE TAPER DRILL BITS 14mm DIAMETER 7-1/4" LENGTH
LOT OF 5 DRILL BITS NO 2 MORSE TAPER 9/16" TO 25/32" DIAMETER SIZE RANGE
13mm Twist Drill BIT MORSE TAPER 2 SHANK 2mt mt2 hss high speed steel PTD USA
Screw Machine Drills 3/8" 135D HSS Qty 5 <1982>
Screw Machine Drills 5/64" HSS Oxide 135D 11/16" x 1-11/16" USA Qty 12 <1982>
Screw Machine Length Drills 0.1709" HSSE TiN 120D 24mm x 68mm Qty 12 <1993>
"PTD" Twist Drill Bits "15" Size, Lot of 9 Pcs
"PTD" Jobber Length Twist Drill Bits # 14 Size, Lot of 12 pcs
"PTD" Twist Drill Bits "5" Size, lot of 7 Pcs
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies