Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 0

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 1

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 2

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 3

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 4

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 5

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 6

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 7

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 8

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 9

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 10

Two (2) Boonton 4200 RF Microwattmeters with Accessories, US $450.00 – Picture 11

Two (2) Boonton 4200 Rf Microwattmeters With Accessories

US $450.00

Annapolis, Maryland, United States
Apr 27th

Open on mobile:
QR code

I am offering two (2) Boonton 4200 RF microwatt meters with accessories and manuals as follows: 1- Model 4200 – S/21 S/N 473119BG is in good working condition. 2- Model 4200 – S/N 145 is complete but NOT working. 3- The following accessories are included in this sale: Two (2) ea extension cables; three (3) ea bolometers, model 51011 (4Bs), two (2) are in working condition, one (1) is NOT working and two (2) original manuals in good condition. BOONTON 4200 POWER METER, RF MICROWATTMETER Features: · Frequency Range, 100 kHz to 100 GHz (sensor dependent) · Power Range 0.1 nW (-70 dBm) to 5 W (+37 dBm) sensor dependent · 20 Measurements per Second · Stored Calibration Data for up to 8 Sensors Specifications: · Frequency Range: 100 kHz to 100 GHz, sensor dependent. Refer to the Power Meter Sensor section · Power Range: (Display calibrated in mW, WW, nW, dBm, and dB relative to selected reference); -70 dBm to +37 dBm (0.1 nW to 5W), sensor dependent Power Reference: · Source: Internal 50 MHz oscillator with Type N female connector on front panel · Power Output: 1.00 mW · Calibration Factors: 3.0 dB to -3.0 dB range in 0.01 dB steps · Ranging: Autoranging plus hold on range · Setting Time: Diode and millimeter wave sensors, typically 0.2 to 0.5s except 1.35 to 2.5s on the lowest range. Thermocouple sensors, typically 0.5 to 6s · Recorder Output: · Watt Mode: 10 volts full-scale, proportional to indicated power over each range · dB Mode: 8 volts equivalent to 0 dBm. Sensitivity of 1 volt per 10 dB change over the entire dB range of sensor · Display: 4 digit LED, 3 1/2 digit display of power, 4 digit display of dB with 0.01 dB resolution. Auxiliary analog display, uncalibrated, proportional to recorder output · Limits: Entered through front panel in dB only, operable in both dB and power modes · Annunciators: LEDs indicate mW, µW, nW, dBm or relative dB (dBr). Power Sensors (Bolometers) Model (Impedance) (RF Connector) Frequency Range Dynamic Range (dBm) Overload Rating (Watts) (dBm) 51011 (4B) 50 ohm N(M) 100 kHz to 12.4 GHz -60 to +10 300 mW +25 dBm Please note these units are being sold “as is where is” with no warranty, express or implied.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Boonton
Model	4200