+ Post new Ad
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 0
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 1
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 2
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 3
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 4
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 5
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 6
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 7
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 8
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 9
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 10
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 11
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 0
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 1
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 2
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 3
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 4
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 5
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 6
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 7
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 8
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 9
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 10
Two Boring Bars marked RDMJN 24-4 With 1-1/2" Shank, 5" And 7" Long, US $34.00 – Picture 11

Two Boring Bars Marked Rdmjn 24-4 With 1-1/2" Shank, 5" And 7" Long

US $34.00

  • Lake Village, Indiana, United States
  • Jan 30th
Open on mobile:
QR code
These bars are being presented in their used working condition and are solely available as shown in the accompanying images. The two variants measure 5-1/2" and 7-1/2" respectively, and have previously been trimmed down from their original lengths. Two Boring Bars available, one displaying RDMJN marking, both furnished with 1-1/2" shanks. Listing has been posted using eBay Mobile services.

Directions

Similar products from Drilling Heads & Tool Holders

MORSE TAPER #5 TO #4 ADAPTER / EXTENSION LATHE MILL MACHINE SHOP TOOLING HOLDER

MORSE TAPER #5 TO #4 ADAPTER / EXTENSION LATHE MILL MACHINE SHOP TOOLING HOLDER

  • Xenia, Ohio, United States
  • Jan 30th
MORSE TAPER #5 TO #3 ADAPTER / EXTENSION LATHE MILL MACHINE HOLDER SHOP TOOLING

MORSE TAPER #5 TO #3 ADAPTER / EXTENSION LATHE MILL MACHINE HOLDER SHOP TOOLING

  • Xenia, Ohio, United States
  • Jan 30th
NEW - SANDVIK INDEXABLE BORING BAR 1.5 X 11.75

NEW - SANDVIK INDEXABLE BORING BAR 1.5 X 11.75

  • Tonganoxie, Kansas, United States
  • Jan 30th
WALTER VALENITE INDEXABLE BALL NOSE END MILL F2139.5.40.240.30

WALTER VALENITE INDEXABLE BALL NOSE END MILL F2139.5.40.240.30

  • Wadley, Alabama, United States
  • Jan 30th
1 Pafana Toolholder Shank 3/4" Diamond CNMG 43 Series 80°Long 4.5

1 Pafana Toolholder Shank 3/4" Diamond CNMG 43 Series 80°Long 4.5

  • Carrollton, Ohio, United States
  • Jan 30th
1 NEW SANDVIK 1" CARBIDE BORING BAR. E16T-SCLCR-3. TAKES CARBIDE INSERT. {F547}

1 NEW SANDVIK 1" CARBIDE BORING BAR. E16T-SCLCR-3. TAKES CARBIDE INSERT. {F547}

  • Mentor, Ohio, United States
  • Jan 30th
Offset Boring Head, Threaded Mount, 1/2" Boring Bar Hole | (6C)

Offset Boring Head, Threaded Mount, 1/2" Boring Bar Hole | (6C)

  • Saint Louis, Missouri, United States
  • Jan 30th
Jet Die Grinders, two long shaft one right angle. Pneumatic.

Jet Die Grinders, two long shaft one right angle. Pneumatic.

  • Schaumburg, Illinois, United States
  • Jan 30th
ISCAR CUT-GRIP 1/2" SHANK GHIL - 12.7 - 2 INDEXABLE BORING BAR 4 CNC LATHE MILL

ISCAR CUT-GRIP 1/2" SHANK GHIL - 12.7 - 2 INDEXABLE BORING BAR 4 CNC LATHE MILL

  • Chino, California, United States
  • Jan 30th
VALENITE 5/8" SHANK GTB-062 INDEXABLE BORING THREADING BAR 4 CNC LATHE MILL

VALENITE 5/8" SHANK GTB-062 INDEXABLE BORING THREADING BAR 4 CNC LATHE MILL

  • Chino, California, United States
  • Jan 30th
Boring Bar marked RDMJN 24-4 With 1-1/2" Shank, 8" Long

Boring Bar marked RDMJN 24-4 With 1-1/2" Shank, 8" Long

  • Lake Village, Indiana, United States
  • Jan 30th
Chicago Pneumatic Angle Sander.

Chicago Pneumatic Angle Sander.

  • Schaumburg, Illinois, United States
  • Jan 30th
Ingersoll Rand Model 310 Dual Action Sander

Ingersoll Rand Model 310 Dual Action Sander

  • Schaumburg, Illinois, United States
  • Jan 30th
1 1/4" DORIAN TOOL DUAL INSERT BORING TOOL S240-DWLN-4

1 1/4" DORIAN TOOL DUAL INSERT BORING TOOL S240-DWLN-4

  • Rochester, New York, United States
  • Jan 30th
Junction box with Hinged Cover

Junction box with Hinged Cover

  • Schaumburg, Illinois, United States
  • Jan 30th
Armstrong Round Boring Bar Tool Holder 1B

Armstrong Round Boring Bar Tool Holder 1B

  • Spring Valley, California, United States
  • Jan 30th
CORMAN/ RMC TOOLING, PART CS-33. 1/4-28 CLAMP SCREW

CORMAN/ RMC TOOLING, PART CS-33. 1/4-28 CLAMP SCREW

  • New Castle, Pennsylvania, United States
  • Jan 30th
CORMAN/ RMC TOOLING, PART LP-66 FOR 5/8" IC CAM PIN

CORMAN/ RMC TOOLING, PART LP-66 FOR 5/8" IC CAM PIN

  • New Castle, Pennsylvania, United States
  • Jan 30th
CORMAN/ RMC TOOLING, PART CK-21 FINGER CLAMP 1/4-28 THREAD

CORMAN/ RMC TOOLING, PART CK-21 FINGER CLAMP 1/4-28 THREAD

  • New Castle, Pennsylvania, United States
  • Jan 30th
MAC-IT CORP. PART #ST-54430, #NS-510, 5/16-24 X 1 1/4" CLAMP SCREW

MAC-IT CORP. PART #ST-54430, #NS-510, 5/16-24 X 1 1/4" CLAMP SCREW

  • New Castle, Pennsylvania, United States
  • Jan 30th

People who viewed this item also vieved

ERICKSON CAT40 TG100 COLLET CHUCK MORE TOOLING LISTED CAT 40 TG 100 LOT C12026

ERICKSON CAT40 TG100 COLLET CHUCK MORE TOOLING LISTED CAT 40 TG 100 LOT C12026

  • Dayton, Ohio, United States
  • Mar 11th
VALENITE CAT40 1-1/4" DIAMETER ENDMILL HOLDER END MILL CAT 40 LOT C11696

VALENITE CAT40 1-1/4" DIAMETER ENDMILL HOLDER END MILL CAT 40 LOT C11696

  • Dayton, Ohio, United States
  • Mar 11th
THREADING MILL VARDEX

THREADING MILL VARDEX

  • Los Angeles, California, United States
  • May 8th
ISCAR GAD 3N-.75 CUT-GRIP External Machining Adapter Grooving Tool

ISCAR GAD 3N-.75 CUT-GRIP External Machining Adapter Grooving Tool

  • Shakopee, Minnesota, United States
  • May 8th
USED SCULLY JONES MORSE TAPER EXTENSION SOCKET #3MT to #3MT x 21.00" OAL MTA

USED SCULLY JONES MORSE TAPER EXTENSION SOCKET #3MT to #3MT x 21.00" OAL MTA

  • Fairfield, Iowa, United States
  • Jun 1st
HARDINGE TM/UM HORIZONTAL MILL 5C MILLING ARBOR 7/8" ***XLNT***

HARDINGE TM/UM HORIZONTAL MILL 5C MILLING ARBOR 7/8" ***XLNT***

  • Highland, New York, United States
  • Jun 1st
B-LOC B106 Series 22mm Keyless Bushing Part # B601022 (New in box)

B-LOC B106 Series 22mm Keyless Bushing Part # B601022 (New in box)

  • Birmingham, Alabama, United States
  • Jun 15th
Browning S2 Split Taper Bushing 2-3/16" 2.1875" inches Bore 662289281558 NIB OEM

Browning S2 Split Taper Bushing 2-3/16" 2.1875" inches Bore 662289281558 NIB OEM

  • Westerville, Ohio, United States
  • Jun 16th
NMTB 50 BEAVER QUICK CHANGE 3/4 ENDMILL TOOL HOLDER A-7048 LOC2287

NMTB 50 BEAVER QUICK CHANGE 3/4 ENDMILL TOOL HOLDER A-7048 LOC2287

  • Sidney, Ohio, United States
  • May 26th
Command B4C4-1000 BT40 Taper Tool TG 100 Collet Holder BT 40 MISSING NUT

Command B4C4-1000 BT40 Taper Tool TG 100 Collet Holder BT 40 MISSING NUT

  • Minneapolis, Minnesota, United States
  • May 26th
ISCAR-ETM ITS-BORE ROUGH BORING HEAD BHR MB50-50X100 STK 7997

ISCAR-ETM ITS-BORE ROUGH BORING HEAD BHR MB50-50X100 STK 7997

  • Wadley, Alabama, United States
  • May 29th
SPI 75-936 TAPMASTER TPC24-1/2PT QUICK CHANGE TAP HOLDER, PRE-SET TORQUE TYPE

SPI 75-936 TAPMASTER TPC24-1/2PT QUICK CHANGE TAP HOLDER, PRE-SET TORQUE TYPE

  • Federal Way, Washington, United States
  • May 29th
SYCLONE 8527 Sky Hook with Bolt Down Base

SYCLONE 8527 Sky Hook with Bolt Down Base

  • Duncan, South Carolina, United States
  • Jun 6th
SYCLONE 8540 Sky Hook with Receiver Hitch Base

SYCLONE 8540 Sky Hook with Receiver Hitch Base

  • Duncan, South Carolina, United States
  • Jun 6th
Jacobs No. 14N Heavy Duty Ball Bearing Drill Chuck 0-1/2" Cap. Excellent

Jacobs No. 14N Heavy Duty Ball Bearing Drill Chuck 0-1/2" Cap. Excellent

  • Yorktown, Indiana, United States
  • Jun 6th
NEW HEAVY DUTY Drill Chuck 5/8" MT3 - Morse Taper - Press NEW

NEW HEAVY DUTY Drill Chuck 5/8" MT3 - Morse Taper - Press NEW

  • Seattle, Washington, United States
  • Jun 6th
Sunnen Hone SL 960 Mandrel with NEW Stone, Truing Sleeve, Wedge, Clip

Sunnen Hone SL 960 Mandrel with NEW Stone, Truing Sleeve, Wedge, Clip

  • Scottsdale, Arizona, United States
  • Jun 9th
SUNNEN HONE MANDREL KL-962 WITH ADAPTER STK 5277

SUNNEN HONE MANDREL KL-962 WITH ADAPTER STK 5277

  • Wadley, Alabama, United States
  • Jun 9th
1.5kW Air Cooled CNC Spindle Motor + 220V/1.5kW Inverter + 1 Set ER11 Collet

1.5kW Air Cooled CNC Spindle Motor + 220V/1.5kW Inverter + 1 Set ER11 Collet

  • Hong Kong, Hong Kong
  • Oct 23rd
250w ER11 12000rpm Brushless DC spindle motor&MACH3 driver&mount bracket CNC kit

250w ER11 12000rpm Brushless DC spindle motor&MACH3 driver&mount bracket CNC kit

  • DongGuan, China
  • Oct 23rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies