+ Post new Ad
TWO MAGNETIC TRANSFER PARALLEL BLOCKS 1-1/4" X 4" X 8" READ DESCRIPTION, US $470 – Picture 0
TWO MAGNETIC TRANSFER PARALLEL BLOCKS 1-1/4" X 4" X 8" READ DESCRIPTION, US $470 – Picture 0

Two Magnetic Transfer Parallel Blocks 1-1/4" X 4" X 8" Read Description

US $470

  • Ellington, New York, United States
  • Jul 18th
Open on mobile:
QR code
  Two Magnetic Parallel Transfer Blocks Note: These are close but not a matched pair Manufactured By ToolCraft Corp (1) 1-1/4" x 3-7/8" x 7-7/8" (1) 1-1/4" x 4" x 7-7/8" Block by themselves are not magnetic. They are design to be used with a magnetic chuck.   No Reserve! Check my other auctions for more quality tools and machinery. If you are waiting for more auctions to end- just let us know. Good Luck Bidding! Our Payment Policy: Payment MUST be received within 5 business days of auction end- unless other arrangements have been made.  We accept PayPal or Cash on Pick-up We do NOT offer Buy-It-Now pricing on auction listings Our Combined Shipping Policy: We ONLY combine items purchased within the same calendar week (Monday thru Saturday).   We cannot issue shipping refunds after payment has been made!  To receive the combined shipping rate you must wait to be invoiced by us- do NOT pay eBay auction end notice.   If you pay immediately following auction end- your item will be shipped the next business day. Our Return Policy: Items MUST be returned for any Refunds.   Buyer pays return shipping.   We do not cover original shipping cost.  We do not offer partial refunds.   Refunds will be given as money back. Items may be returned for any reason, complete item must be returned within 14 days of the end of auction in the condition it was received for a full refund.   Powered by SixBit's eCommerce Solution
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Unbranded
MPN Does Not Apply

Directions

Similar products from Supporting Blocks & Sets

Magnetic Transfer Blocks Toolmaker Machinist EDM Grind Anton Machine ?

Magnetic Transfer Blocks Toolmaker Machinist EDM Grind Anton Machine ?

  • Red Lion, Pennsylvania, United States
  • Jul 20th
BENCH BLOCK SIZE 3" ROUND - HOLES 1/8" TO 5/8" 2 pcs/set

BENCH BLOCK SIZE 3" ROUND - HOLES 1/8" TO 5/8" 2 pcs/set

  • DELHI, DELHI, India
  • Jul 20th
MITUTOYO TWO MATCHED V-BLOCKS 1-1/4" X 1-1/4" X 1-5/8" WITH TWO CLAMPS

MITUTOYO TWO MATCHED V-BLOCKS 1-1/4" X 1-1/4" X 1-5/8" WITH TWO CLAMPS

  • Orange, California, United States
  • Jul 20th
5 TE-CO USA 40105 Steel Step Blocks Set Up Hold Down Machinists Tooling jb2

5 TE-CO USA 40105 Steel Step Blocks Set Up Hold Down Machinists Tooling jb2

  • Centerville, Indiana, United States
  • Jul 20th
Antique Machinist Tool Steel Precision ANGLE Block Plates Vintage Toolmakers

Antique Machinist Tool Steel Precision ANGLE Block Plates Vintage Toolmakers

  • Georgetown, Kentucky, United States
  • Jul 19th
(2 Pk) TE-CO Steel Step Block Set 1" x 2-15/32" x 3-3/4" 40104

(2 Pk) TE-CO Steel Step Block Set 1" x 2-15/32" x 3-3/4" 40104

  • Chillicothe, Missouri, United States
  • Jul 19th
18PCS Parallel Horns Pads Flat Vise Plates Contour Milling Machine Metalworking

18PCS Parallel Horns Pads Flat Vise Plates Contour Milling Machine Metalworking

  • Tongren, Guizhou, China
  • Jul 19th
CLEAN LITTLE USED MACHINIST V-BLOCK

CLEAN LITTLE USED MACHINIST V-BLOCK

  • Newport, Maine, United States
  • Jul 19th
11x8"x5-1/2" Cast Iron 90° Angle Plate/Block Machinist Set Up Fixture

11x8"x5-1/2" Cast Iron 90° Angle Plate/Block Machinist Set Up Fixture

  • Middlebury, Indiana, United States
  • Jul 19th
PAIR OF 6FT BALL CABLE HOLD DOWNS 5/8" BALL DIA

PAIR OF 6FT BALL CABLE HOLD DOWNS 5/8" BALL DIA

  • Ellington, New York, United States
  • Jul 18th
(5.1cm x 5.1cm - 1cm x 2.5cm - 2.2cm Size, Block Pair Set) - HHIP

(5.1cm x 5.1cm - 1cm x 2.5cm - 2.2cm Size, Block Pair Set) - HHIP

  • Brooklyn, NY, United States
  • Jul 18th
(10cm - 1cm x 5.1cm - 1cm x 2.5cm - 2.2cm Size, Single) - HHIP 3402-0007

(10cm - 1cm x 5.1cm - 1cm x 2.5cm - 2.2cm Size, Single) - HHIP 3402-0007

  • Brooklyn, NY, United States
  • Jul 18th
HOMEMADE ANGLE PLATE GRIND FIXTURE TOOLMAKER MACHINIST HERMANN SCHMIDT BOX

HOMEMADE ANGLE PLATE GRIND FIXTURE TOOLMAKER MACHINIST HERMANN SCHMIDT BOX

  • Peach Bottom, Pennsylvania, United States
  • Jul 18th
Chuck Jaws - Serrated (set of 3)

Chuck Jaws - Serrated (set of 3)

  • Haltom City, Texas, United States
  • Jul 18th
Precision Magnetic V block 65 x 65 x 50 mm - 2.5 Inch Set Of 2 Pc Both Side V..

Precision Magnetic V block 65 x 65 x 50 mm - 2.5 Inch Set Of 2 Pc Both Side V..

  • Delhi, Delhi, India
  • Jul 18th
Magnetic v block 65X65X50mm HARDENED & GROUNDED high power set of 2 piece..

Magnetic v block 65X65X50mm HARDENED & GROUNDED high power set of 2 piece..

  • Delhi, Delhi, India
  • Jul 18th
Vintage Starrett No 271 Matched Machinist V Blocks

Vintage Starrett No 271 Matched Machinist V Blocks

  • Seabrook, New Hampshire, United States
  • Jul 18th
2 MACHINISTS Hardened RIGHT ANGLE BLOCK

2 MACHINISTS Hardened RIGHT ANGLE BLOCK

  • Flanders, New Jersey, United States
  • Jul 18th
HHIP 3402-0054 1-2-3 Blocks Set 1 Hole

HHIP 3402-0054 1-2-3 Blocks Set 1 Hole

  • Miami, Florida, United States
  • Jul 18th
L.S.Starrett Co. No. 568 Machinist Toolmaker V Block NO CLAMP USA 3/8-16 holes

L.S.Starrett Co. No. 568 Machinist Toolmaker V Block NO CLAMP USA 3/8-16 holes

  • North Grosvenordale, Connecticut, United States
  • Jul 18th

People who viewed this item also vieved

Vtg Heavy Steel Morse No 3 Taper Dead Center, 3 1/4" Long, 1" Shank, 3/16" Hole

Vtg Heavy Steel Morse No 3 Taper Dead Center, 3 1/4" Long, 1" Shank, 3/16" Hole

  • Milford, Connecticut, United States
  • Jan 30th
Precision Live Center Set - 3MT

Precision Live Center Set - 3MT

  • Warren, Michigan, United States
  • Jan 30th
SKODA 2 CSN243324 1 PRECISION MORSE TAPER MT2 LIVE CENTER

SKODA 2 CSN243324 1 PRECISION MORSE TAPER MT2 LIVE CENTER

  • Chino, California, United States
  • Jan 30th
3 LATHE CHUCK JAWS Outside Small old vintage tool 298e

3 LATHE CHUCK JAWS Outside Small old vintage tool 298e

  • Dearborn, Michigan, United States
  • Jan 30th
3 LATHE CHUCK JAWS Inside old vintage tool 292e

3 LATHE CHUCK JAWS Inside old vintage tool 292e

  • Dearborn, Michigan, United States
  • Jan 30th
3 LATHE CHUCK JAWS Outside old vintage tool 297e

3 LATHE CHUCK JAWS Outside old vintage tool 297e

  • Dearborn, Michigan, United States
  • Jan 30th
2-KNU-VISE SC-800, 1- DE STA CO 207-U WORKHOLDING CLAMPS

2-KNU-VISE SC-800, 1- DE STA CO 207-U WORKHOLDING CLAMPS

  • Saginaw, Michigan, United States
  • Jan 30th
MHC Industrial Supply 58 piece Deluxe Steel Clamping Kit.

MHC Industrial Supply 58 piece Deluxe Steel Clamping Kit.

  • Spencer, Tennessee, United States
  • Jan 30th
MILLING MACHINE TOE CLAMPS STRAPS 5/8" 5-3/4" AND 6-3/4" LONG X 1-3/4 X 5/8 9330

MILLING MACHINE TOE CLAMPS STRAPS 5/8" 5-3/4" AND 6-3/4" LONG X 1-3/4 X 5/8 9330

  • Resaca, Georgia, United States
  • Jan 30th
LYNDEX TAPER COLLET CHUCK, TOOL HOLDER, NMT50

LYNDEX TAPER COLLET CHUCK, TOOL HOLDER, NMT50

  • Coffeyville, Kansas, United States
  • Jan 30th
AIR-FLO END MILL SHARPENING FIXTURE air bearing tool cutter grinder STEPTOOL USA

AIR-FLO END MILL SHARPENING FIXTURE air bearing tool cutter grinder STEPTOOL USA

  • Milroy, Indiana, United States
  • Jan 30th
Machinist tools,5C collet blocks

Machinist tools,5C collet blocks

  • Bennington, New Hampshire, United States
  • Jan 30th
Rivett Precision 25/64" 5C Collet

Rivett Precision 25/64" 5C Collet

  • Chino, California, United States
  • Jan 30th
Two BT50 HOLDER- COLLET CHUCK- MST - CTA ULTRA-PRECISION - HIGH SPEED, HIGH FEED

Two BT50 HOLDER- COLLET CHUCK- MST - CTA ULTRA-PRECISION - HIGH SPEED, HIGH FEED

  • Farmington, Michigan, United States
  • Jan 30th
Acura-Flex 31/64 Collet - 12.5mm

Acura-Flex 31/64 Collet - 12.5mm

  • Compton, California, United States
  • Jan 30th
L00 MOUNT FOR SPINDLE NOSE OR OTHER

L00 MOUNT FOR SPINDLE NOSE OR OTHER

  • Ellington, New York, United States
  • Jan 30th
HARDINGE MODEL C24 TAPER LOCK MOUNT

HARDINGE MODEL C24 TAPER LOCK MOUNT

  • Ellington, New York, United States
  • Jan 30th
4 FORGED MILLING MACHINE TABLE CLAMPS boring mill work holder tools ALL USA MFG

4 FORGED MILLING MACHINE TABLE CLAMPS boring mill work holder tools ALL USA MFG

  • Milroy, Indiana, United States
  • Jan 30th
Atlas # 10-76 & # 10-77 Rocker Shaft & Lever Cam / OO 210

Atlas # 10-76 & # 10-77 Rocker Shaft & Lever Cam / OO 210

  • Seffner, Florida, United States
  • Jan 30th
Dividing Plates Set for HV4 & HV6 Rotary Table with its working manual

Dividing Plates Set for HV4 & HV6 Rotary Table with its working manual

  • Delhi, DELHI, India
  • Jan 30th
Neutrofier II Electro-Matic Chuck Controller, P/N 02576A, Mod# CAV5-71A-11, Used

Neutrofier II Electro-Matic Chuck Controller, P/N 02576A, Mod# CAV5-71A-11, Used

  • Grand Rapids, Michigan, United States
  • Jan 30th
MOORE 10" ROTARY TABLE JIG BORER MILLING MACHINE ***NICE***

MOORE 10" ROTARY TABLE JIG BORER MILLING MACHINE ***NICE***

  • Highland, New York, United States
  • Jan 30th
IMC CAMCO FERGUSON MODEL 50RGS4H14-270 INDEXER DRIVE, 4 STOP COMPLETE NEW

IMC CAMCO FERGUSON MODEL 50RGS4H14-270 INDEXER DRIVE, 4 STOP COMPLETE NEW

  • Dayton, Ohio, United States
  • Jan 30th
8 INCH 4-JAW SELF-CENTERING ROTARY CHUCK (3900-2418) - MADE IN TAIWAN

8 INCH 4-JAW SELF-CENTERING ROTARY CHUCK (3900-2418) - MADE IN TAIWAN

  • Chino, California, United States
  • Jan 30th
brown sharpe machinist swivel vise

brown sharpe machinist swivel vise

  • Red Creek, New York, United States
  • Jan 30th
VINTAGE COLUMBIAN No.63 1/2 RED Bench VISE 3 1/2" WITH ANVIL SWIVEL & PIPE JAWS

VINTAGE COLUMBIAN No.63 1/2 RED Bench VISE 3 1/2" WITH ANVIL SWIVEL & PIPE JAWS

  • Mohave Valley, Arizona, United States
  • Jan 30th
WILTON BABY BULLET 2 " JAWS GREAT CONDITION SMOOTH OPERATION

WILTON BABY BULLET 2 " JAWS GREAT CONDITION SMOOTH OPERATION

  • Springfield, Missouri, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies