+ Post new Ad
Two Starrett 568 V-Blocks and 2 Clamps may be matched?, US $450 – Picture 0
Two Starrett 568 V-Blocks and 2 Clamps may be matched?, US $450 – Picture 0

Two Starrett 568 V-blocks And 2 Clamps May Be Matched?

US $450

  • Livingston, New Jersey, United States
  • Jun 21st
Open on mobile:
QR code
Two Starrett 568 V-Blocks and 2 Clamps.  They are tapped with a 3/8-16 tapped holes permit mounting blocks on faceplates or angle irons.  Each block is 2-1/2" Length x 3" Width x 2" Height.  Hardened steel, precision ground parallel and square The do have some tarnish on the steel. They may be a marched pair as the both have the same casting number 2042.  I am not a machinist so please ask any questions before bidding. V-grooves are ground central and parallel to the sides and base perfect alignment in matched pairs Clamps have screw holes at 45 degree and 90 degree to hold either square or round work Please see the photos. We ship to US addresses only.  We hope you are happy with you purchase, if not just return the item within five days for a full refund of the item cost.  We ship within two days of good payment.  Please check our feedback.

Directions

Similar products from Supporting Blocks & Sets

MACHINIST TOOL LATHE MILL Machinist Lot of Ground Toolmakers Angle Block s

MACHINIST TOOL LATHE MILL Machinist Lot of Ground Toolmakers Angle Block s

  • Morris Plains, New Jersey, United States
  • Jun 22nd
(LOT OF 2) LUFKIN NO. 905 V-BLOCK With Clamps

(LOT OF 2) LUFKIN NO. 905 V-BLOCK With Clamps

  • Lewistown, Pennsylvania, United States
  • Jun 21st
MACHINIST GUNSMITH TOOL MILLING LATHE TOOL LARGE V BLOCK SET UP WORK HOLDING

MACHINIST GUNSMITH TOOL MILLING LATHE TOOL LARGE V BLOCK SET UP WORK HOLDING

  • Hampstead, North Carolina, United States
  • Jun 21st
MACHINIST TOOLS LATHE MILL Machinsit 2 Ground Mass Tool Co V Blocks ToolMakers

MACHINIST TOOLS LATHE MILL Machinsit 2 Ground Mass Tool Co V Blocks ToolMakers

  • Morris Plains, New Jersey, United States
  • Jun 21st
MACHINIST TOOL LATHE MILL Machinist Lot of 2 Set Up Rollers Blocks Fixture

MACHINIST TOOL LATHE MILL Machinist Lot of 2 Set Up Rollers Blocks Fixture

  • Morris Plains, New Jersey, United States
  • Jun 21st
BROWN & SHARPE Ultra-Thin parallel set in case- NMint condition- FREE USA ship

BROWN & SHARPE Ultra-Thin parallel set in case- NMint condition- FREE USA ship

  • Waterford, Michigan, United States
  • Jun 21st
NICE PAIR OF STARRETT NO 54 HOLD DOWNS 4" INCH

NICE PAIR OF STARRETT NO 54 HOLD DOWNS 4" INCH

  • Toms River, New Jersey, United States
  • Jun 21st
Toolmaker's Fishtail V-Block

Toolmaker's Fishtail V-Block

  • Cape Neddick, Maine, United States
  • Jun 21st
Starrett No. 567 Multi-Function V-Block; Includes Clamp (CTAM 9716)

Starrett No. 567 Multi-Function V-Block; Includes Clamp (CTAM 9716)

  • Sicklerville, New Jersey, United States
  • Jun 21st
18 Piece Parallel Set, 6" Length, 3/4" - 1-3/4" Height Range, 1/4" Thick (JE2)

18 Piece Parallel Set, 6" Length, 3/4" - 1-3/4" Height Range, 1/4" Thick (JE2)

  • Saint Louis, Missouri, United States
  • Jun 21st
Tietzmann Tool Corp. Step Blocks

Tietzmann Tool Corp. Step Blocks

  • Carthage, North Carolina, United States
  • Jun 19th
matched set of 1 2 3 blocks hardened and ground tool maker machinist mill drill

matched set of 1 2 3 blocks hardened and ground tool maker machinist mill drill

  • Brownsburg, Indiana, United States
  • Jun 19th
MACHINIST MADE 1 2 3 BLOCKS - SET OF TWO

MACHINIST MADE 1 2 3 BLOCKS - SET OF TWO

  • Newbury, Ohio, United States
  • Jun 19th
TWO MILLING MACHINE BLOCKS - 1" by 1 1/2" by 6 3/4"

TWO MILLING MACHINE BLOCKS - 1" by 1 1/2" by 6 3/4"

  • Newbury, Ohio, United States
  • Jun 19th
TWO MILLING MACHINE BLOCKS - 1" by 1 1/2" by 9 1/4"

TWO MILLING MACHINE BLOCKS - 1" by 1 1/2" by 9 1/4"

  • Newbury, Ohio, United States
  • Jun 19th
TWO MILLING MACHINE BLOCKS - 1" by 1 1/2" by 14 1/4"

TWO MILLING MACHINE BLOCKS - 1" by 1 1/2" by 14 1/4"

  • Newbury, Ohio, United States
  • Jun 19th
Brown & Sharpe V-Block No. 750-B No. 11 - Machinist Tool 750

Brown & Sharpe V-Block No. 750-B No. 11 - Machinist Tool 750

  • Murfreesboro, Tennessee, United States
  • Jun 19th
Machinist Blocks (2)

Machinist Blocks (2)

  • Cherry Hill, New Jersey, United States
  • Jun 18th
FISHER MACHINE Universal Magnetic Chuck V-Block ~ Machinist/Lathe/Grinder/U.S.A.

FISHER MACHINE Universal Magnetic Chuck V-Block ~ Machinist/Lathe/Grinder/U.S.A.

  • Twinsburg, Ohio, United States
  • Jun 18th
Custom Machinist Block (shape of Stairs)

Custom Machinist Block (shape of Stairs)

  • Cherry Hill, New Jersey, United States
  • Jun 18th

People who viewed this item also vieved

DS2-60 2MT 60 degree Bull Nose Live Center

DS2-60 2MT 60 degree Bull Nose Live Center

  • Euclid, Ohio, United States
  • Jan 30th
TTC Carbide Tipped Dead Center - TAPER: 3 MT

TTC Carbide Tipped Dead Center - TAPER: 3 MT

  • Flushing, New York, United States
  • Jan 30th
TTC Revolving Tailstock Turret Reaming Chuck for 2-1/2" Turret

TTC Revolving Tailstock Turret Reaming Chuck for 2-1/2" Turret

  • Flushing, New York, United States
  • Jan 30th
VERY NICE SUTTON 8" 3 JAW POWER CHUCK MODEL TEA 21790

VERY NICE SUTTON 8" 3 JAW POWER CHUCK MODEL TEA 21790

  • Rochester, New York, United States
  • Jan 30th
VERY NICE SUTTON 8" 3 JAW POWER CHUCK MODEL TEA 21806

VERY NICE SUTTON 8" 3 JAW POWER CHUCK MODEL TEA 21806

  • Rochester, New York, United States
  • Jan 30th
3" ( 3 inch) 3 Jaw Precision Self Centering Lathe Chuck with 2 sets jaw

3" ( 3 inch) 3 Jaw Precision Self Centering Lathe Chuck with 2 sets jaw

  • Diamond Bar, California, United States
  • Jan 30th
DE-STA-CO 201-TU Clamp, 201-TU, NPM 52012, New In Bag

DE-STA-CO 201-TU Clamp, 201-TU, NPM 52012, New In Bag

  • Warren, Michigan, United States
  • Jan 30th
DE-STA-CO 331-SS Clamp, NPM 53319, New In Bag

DE-STA-CO 331-SS Clamp, NPM 53319, New In Bag

  • Warren, Michigan, United States
  • Jan 30th
DE-STA-CO 2010-UB Clamp, NPM 52009, New In Bag

DE-STA-CO 2010-UB Clamp, NPM 52009, New In Bag

  • Warren, Michigan, United States
  • Jan 30th
HEAVY DUTY HORIZONTAL 5C COLLET INDEXER

HEAVY DUTY HORIZONTAL 5C COLLET INDEXER

  • Newhall, California, United States
  • Jan 30th
HARDINGE HV-4NX5C INDEXER

HARDINGE HV-4NX5C INDEXER

  • Wallingford, Connecticut, United States
  • Jan 30th
Jacobs Rubber Flex Collet Closer 500 series .100 to 1.062 Cap 1 1/2" 8 Mount

Jacobs Rubber Flex Collet Closer 500 series .100 to 1.062 Cap 1 1/2" 8 Mount

  • Milwaukee, Wisconsin, United States
  • Jan 30th
5C Collets - Various - +500 Pcs

5C Collets - Various - +500 Pcs

  • Wixom, Michigan, United States
  • Jan 30th
KENNAMETAL/ERICKSON G SERIES PIPE TAP COLLETS SEE DESRIPTION FOR AVAILIBLE SIZES

KENNAMETAL/ERICKSON G SERIES PIPE TAP COLLETS SEE DESRIPTION FOR AVAILIBLE SIZES

  • Wadley, Alabama, United States
  • Jan 30th
1 inch 5C Expanding Collet (Arbor) American Made

1 inch 5C Expanding Collet (Arbor) American Made

  • Tilton, New Hampshire, United States
  • Jan 30th
TAFT Pierce 391A Open Bodycast Iron V-Block

TAFT Pierce 391A Open Bodycast Iron V-Block

  • Elkhart, Indiana, United States
  • Jan 30th
TAFT Pierce 4 x 4 x 6 Riser Block with V-Groove

TAFT Pierce 4 x 4 x 6 Riser Block with V-Groove

  • Elkhart, Indiana, United States
  • Jan 30th
TAFT Pierce 4 x 4 x 6 Riser Block

TAFT Pierce 4 x 4 x 6 Riser Block

  • Elkhart, Indiana, United States
  • Jan 30th
VERY NICE SET OF 1/2" 3/4" & 1" DRIVER DOGS LOT TOOLS 4 LATHE MACHINIST

VERY NICE SET OF 1/2" 3/4" & 1" DRIVER DOGS LOT TOOLS 4 LATHE MACHINIST

  • United States
  • Jan 30th
Lot of 5 Model 27240 Positioner

Lot of 5 Model 27240 Positioner

  • Peoria, Illinois, United States
  • Jan 30th
Model P290000108 Carbon Steel Positioner

Model P290000108 Carbon Steel Positioner

  • Peoria, Illinois, United States
  • Jan 30th
Hodgson Dividing Head Casting Component. Pratt Whitney Tool Model Kit Part ??

Hodgson Dividing Head Casting Component. Pratt Whitney Tool Model Kit Part ??

  • Cornell, Illinois, United States
  • Jan 30th
dividing plate for 4" rotary table

dividing plate for 4" rotary table

  • Lawrenceville, Georgia, United States
  • Jan 30th
Graham Hydaulic Rotary Indexing Table # 36-360

Graham Hydaulic Rotary Indexing Table # 36-360

  • Wyoming, Michigan, United States
  • Jan 30th
Set Of TSI 9W6 Twin Screw Black Vise With 12" Length

Set Of TSI 9W6 Twin Screw Black Vise With 12" Length

  • Apex, North Carolina, United States
  • Jan 30th
90 DEGREE ANGLE DRILL PRESS VISE 0 - 2-1/4" MAX. CAPACITY

90 DEGREE ANGLE DRILL PRESS VISE 0 - 2-1/4" MAX. CAPACITY

  • Chino, California, United States
  • Jan 30th
MACHINIST MILLING DRILL PRESS VISE 6" CAPACITY

MACHINIST MILLING DRILL PRESS VISE 6" CAPACITY

  • Chino, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies