Ubiquiti Mfi Wall Mount Motion Security Sensor Detector Mfi-msw New Sealed!!!

US $30

  • Kansas City, Missouri, United States
  • May 31st
The Ubiquiti Networks mFi-MSW Wall Mount Motion Sensor is used with the mPort Machine Interface to create an intelligent network for machine management and smart building automation. Insert one end of a Cat 5 or 6 cable into the Motion Sensor, and mount it on the wall of the room you wish to monitor. Plug the other end of the cable into the mPort machine Interface, which will convey the Motion Sensor's findings to mFi Controller software. Access your network of mFi devices from your web browser to set up user-defined event recordings, alerts, and more. Immunity RF Immunity: Average 10 V/m at 80 MHz to 2 GHz Detection Range 32.8 x 32.8' (10 x 10 m) 110° @ 77°F (25°C) Speed Detection Speed: 0.3 to 3.0 m/sec Ports 1 x mFi RJ45 port Sensor Type Motion Sensor Infrared Sensor: Dual element Microwave Sensor: DRO, patch antenna Alarm Period 3 sec Alarm Output NC/NO, 24 VDC, 0.2 A. maximum Mounting Wall/ceiling-mount bracket (mounting kits included) Mounting Height Typical: 7.5' (2.3 m) Power Supply 9 to 16 VDC Typical: 12 VDC Current Drain 35 mA @ 12 VDC Installation Requirements mFi mPort CAT5/6 cable Phillips screwdriver Drill with 6 mm drill bit (optional) Operating Temperature 14 to 113°F (-10 to 45°C) Operating Humidity 95% RH maximum Dimensions 5.75 x 2.6 x 2.05" (14.6 x 6.6 x 5.2 cm) Weight 4.48 oz (12 g)

Directions

Similar products from Movement Sensors

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies