Ulano 5 Emulsion And Stencil Remover Paste For Screen Printing / Reclaim Gsrp5

US $74.99

Spring Valley, Minnesota, United States
Jul 23rd

Open on mobile:
QR code

Ulano 5 Emulsion and Stencil Remover Paste for Screen Printing / Reclaim GSRP5 Only Ships to The Lower 48 States Ready-to-use paste for fast and thorough removal of direct emulsions, CDF Direct Films, and Pulsar indirect film from all types of mesh including metalized polyester. INSTRUCTIONS Remove ink with the proper solvent. Degrease first with Screen Degreaser Liquid No. 3 to remove solvent residues and to help speed the action of the stencil remover. Rinse thoroughly. Use a soft brush to apply Stencil Remover Paste No. 5 on the mesh from both sides. Wait five minutes - no longer. Do not allow the stencil remover to dry on the screen, as this can result in a permanent stencil. Wash away the stencil with a hard spray of water, preferably a power spray. Note: Avoid freezing Stencil Remover Paste No. 5. Freezing and thawing will change the consistency from a paste to a liquid. This has no effect on the chemical activity as a stencil remover - it can be used in the same way as Stencil Remover Liquid No. 4. Stencil Remover Paste No. 5 is a strong oxidant. It can cause skin irritation; use gloves. Keep the container closed tightly. Clean spills immediately. First Aid: In case of contact with the eyes or skin, flush immediately with water. If irritation develops, contact a physician. Authorized Dealer 100% Guaranteed! In Business Over 50 Years

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	Ulano GSRP5
MPN	GSRP5
Type	Emulsion
Brand	ULANO