Ultra Low Temp Freezer, -50 To -86 Deg C, Lab, 20 Cu Ft, Ultima Ii, Revco Tested

US $4300

Morgantown, Pennsylvania, United States
May 31st

Open on mobile:
QR code

Ultra low temp freezer, -50 to -86 deg C, Lab, 20 cu ft, Ultima II, Revco TESTED This is a used 20 cubic foot ultra low temperature freezer made by Revco, Ultima II model number ULT2186-9-D35. Freezer was tested and it achieved and the -80 DEG C setpoint and was allowed to run for 8 hours with no problems. Unit is in very good condition with only a few minor scratches. Temperature range: -50 to - 86° C Digital controller: Locking set point Alerts: Life-guard Power failure Temperature failure Extreme ambient temperature Clean filter Battery low Controls: Cabinet temperature Control set point Warm alarm set point Cold alarm set point Check fuse Cascaded refrigeration system Remote alarm output Interior volume: 28.5" x 24.25" x 50.5" (20.2 cubic ft) Pressure equalization port for opening door Heavy duty door latch with lock, and provision for padlock Four shelves creates five interior compartments, each with their own sub-door. These sub-doors have magnetic latches. The shelves are adjustable. 208/230 VAC, 10 amps, single phase Specifications: MFG: Revco Model: Ultima II ULT2186-9-D35 Serial: R19M-578606-RM Volts: 208/230 Amps: Phase: Drive: Controls: Manuals: Air: Weight: 650 Lbs Condition: Used Length: 42 Width: 37 Height: 78 All dims inches unless otherwise noted Inventory #: 6313 For more information call 610-286-1655. Please call or email for shipping rates. International purchases: A $40 documentation processing fee will be added to total purchase for items under $150. When communicating with us please use your own email address or call 610-286-1655. We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system. Send emails to heritageequipment AT gmail.com The new ebay buyer protection program has inspired us to offer all of our items “as-is”.This does not mean that you are buying a machine with deficiencies, known or unknown. What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine. In addition to this written description you will have the opportunity to view high quality photos of the item. With these two sources of information you will have as much information as possible without being physically here to inspect the machine. Feel assured that we will make a diligent effort to give you an accurate description of the equipment. As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine. Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment. The very few times we have had to deal with these issues we have been very helpful in resolving the problem.