Ultrasonic Flowmeter V15 Weather-resistant And Dust-tight Enclosure New In Box

US $450.00

Los Gatos, California, United States
Jan 29th

Open on mobile:
QR code

The wall mounted flowmeter is based on transit-time flow measurement principle. It measures flow rate of liquid in a closed pipe by using a pair of clamp-on or wetted ultrasonic transducers. In general, the liquid should be full of pipe, and should contain no or small amount of particles or air bubbles. The flowmeter can be applied in a wide range of pipe flow measurements; Applicable liquids include pure liquids as well as liquid with small quantity of particles. Examples are: ?Water (hot water, chilled water, city water, sea water, waste water, etc.) ?Sewage with small particle content ?Oil (crude oil, lubricating oil, diesel oil, fuel oil, etc. ?Chemicals (alcohol, acids, etc.) ?Plant effluent ?Beverage, liquid food ?Ultra-pure liquids ?Solvents and other liquids Applications sorted by industry/process Water and waste water management; Water and waste water treatment plants; Power plants, such as nuclear power plants and hydraulic power plants; Mining and metallurgy plants; Petroleum process monitoring and control; Chemical process monitoring and control; Pulp and paper process monitoring and control; Food and beverage processing; Marine maintenance and operation; Pipeline leakage detection; HVAC, hydronic balancing; Energy supply and production systems; Flow measurement networking The main unit electronics are housed in an IP68 (NEXA4X) weather-resistant and dust-tight enclosure. There, the main unit can be installed indoors and outdoors. Usually, it is mounted in a meter shed or on a location where one can easily access for meter testing and servicing. Packing list ?Transmitter 1unit ?Transducer 1 set ?Transducers cable Linearity Better than ±1%. Accuracy ±1% of reading at rates >0.6 ft/s (0.2m/s). Assume a fully developed flow profile. Repeatability ±0.2%. Velocity ±0.03 ~ ±105 ft/s (±0.01 ~ ±30 m/s), bi-directional Measurement Period 0.5s Display LCD with backlight. 2x20 letters. Keypad 4x4-key membrane keypad with tactile feedback Units English (U.S.) or metric. Outputs Analogue output: 4-20mA or 0-20mA current output. Impedance 0~1kW. Accuracy 0.1%. . Isolated OCT output: for frequency output (0~9,999Hz), alarm driver, or totalized pulse output, ON/OFF control, etc. Relay output 1A@125VAC or 2A@30VDC. For ON/OFF control, alarm driver, totalized output, etc. Internal Alarm (Buzzer): user programmable. External Alarm Driver: alarm signal can be transmitted to Relay or OCT output terminals to drive an external alarm. RS-232 serial port. Input Five channel 4-20mA current inputs for signals such as temperature, pressure, liquid level, and etc. Accuracy 0.1%. Two of the five input channels are wired to terminal blocks. The remaining three channels are optional. Enclosure Die-cast aluminum enclosure. Protection Class: IP65 (NEMA 4X). Size: 9.88x7.56x3.15 (251x192x80mm3) for standard version Clamp-on S1-type: for pipe size 1~4 (DN30~DN100mm) M1-type: for pipe size 2~28(DN50~DN700mm) L1-type: for pipe size 11~240(DN300~DN6,000mm) Liquid Types Virtually all commonly used clean liquids. Liquids with small quantity of tiny particles may also be applicable. Particle size should be less than 75um, particle concentration less than 10,000ppm. Liquids should contain no or very minor air bubbles. Examples are chilled/hot water, sea water, waste water, chemical liquids, oil, crude oil, alcohol, beer, etc. Liquid Temp 32F - 212F (0C - 100C) for clamp-on transducer. Higher temperatures can be accommodated. Consult the manufacturer for assistance. 32F - 302F (0C - 150C) for wetted transducer. Pipe Size 1 ~ 240 (DN25mm ~ DN6,000mm). Pipe Material All metals, most plastics, fiber glass, etc. Allow pipe liner. Cable Shielded transducer cable. Standard length 15 (5m). Can be extended to 1640 (500m). Contact the manufacturer for longer cable requirement. Power AC: 240V DC: 8VDC~36VDC Power consumption: < 2W Manual Included Item is in the US, no customs processing, no import duty, and no brokerage fees.

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

Country/Region of Manufacture

China