Unidata Starlogger Data loggers Model 6004C and Install Box, US $630 – Picture 0

Unidata Starlogger Data loggers Model 6004C and Install Box, US $630 – Picture 1

Unidata Starlogger Data loggers Model 6004C and Install Box, US $630 – Picture 2

Unidata Starlogger Data loggers Model 6004C and Install Box, US $630 – Picture 3

Unidata Starlogger Data Loggers Model 6004c And Install Box

US $630

Samut Prakan, Thailand, Thailand
Jun 9th

Open on mobile:
QR code

Unidata Starlogger Data loggers Model 6004C Model 6004 (Have more 10 Ea. in stock ) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules in the U.S.A. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This equipment has been tested for compliance with European regulations as follows: Application of Council Directive: 2004/108/EC Standards to which Conformity is declared: EN-61000-6-1:2001 EN-61000-4-2:1995 EN-61000-4-3:1995 EN-61000-4-4:1995 EN-61000-4-6:1996 ENV-50204:1995 The STARLOGGER (Model 6004) is a battery powered data gathering unit manufactured by UNIDATA. It is ideally suited for automatic data collection at remote, unmanned locations. The STARLOGGER incorporates the latest advanced CMOS technology and intelligent auto calibration te chniques to provide a very accurate, low cost, programmable data collection system. The STARLOGGER is an upward compatible development of the STARLOG Portable Data Logger (Model 6003) - it offers all the features of the Portable Data Logger plus the extensions provided by 10-bit resolution and universal memory storage. Like all STARLOG products it is battery-powered, has a simple robust construction, is available at a low cost, and has a universal application. The STARLOGGER is designed to be operated with either Version 2 or Version 3 STARLOG Software Support Package (Models 6300 and 6301). This supplement provides technical details for users of the STARLOGGER. It is divided into several chapters. Each chapter describes a different part of the STARLOGGER. In addition, a set of Appendices provide information for very advanced users. Brief introductions to these chapters appear below. STARLOGGER – introduces the STARLOGGER and gives a brief summary of its features and operation. Specifications – lists physical and performance specifications and explains battery and memory capacity options. Power Supply – describes how to change battery pa cks, use an external power supply and how to test and monitor power supply. Installation & Connection – describes how to connect instruments to the Logger and initialising the Logger. Internal Channels – a listing and explanation of two special channels. Computer Communication – lists the specifications for communication with a computer and explains in detail the most common method of interface. STARLOGGER Programming – describes STARLOGGER programming techniques if you intend to program your own Logger. Configuration Table – describes how a STARLOGGER is configured - it identifies and explains that particular part of memory and how it is used. Test Diagnostics – explains how to use inbuilt diagnostic firmware to test and calibrate the STARLOGGER. ARLOGGER OVERVIEW This chapter provides an overview of the STARLOGGER’s features, including its programming and operation. As a major design development in the STARLOG range, the STARLOGGER has an expanded signal capacity and range, and easier programmability. It offers 12 input channels, two high speed serial input/output busses and two outputs. It also provides two power sources for external instruments. The range of scan rates extends from 125 milliseconds to 5 minutes. (See Chapter 3 for a li st of exact operational specifications.) The STARLOGGER communicates using standard asynchronous RS-232 serial communication standards which allow it to communicate with an IBM PC or compatible computer using a standard cable. See Manual Search Unidata-Manual-6004-Starlogger-Issue-2.1.pdf