+ Post new Ad
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 0
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 1
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 2
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 3
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 4
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 5
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 6
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 7
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 8
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 9
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 0
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 1
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 2
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 3
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 4
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 5
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 6
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 7
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 8
Unidex Lifting Arm Lifter Manipulator Unused, US $1,495.00 – Picture 9

Unidex Lifting Arm Lifter Manipulator Unused

US $1,495.00

  • New Berlin, Wisconsin, United States
  • May 10th
Open on mobile:
QR code
Unidex model AHSC 3625HD Air over hydraulic, runs on 100 psi shop air. 250lb capacity. 72" reach from center pin of arm. Lowered height is 62" to the bottom of the black swivel. 36" stroke for 98" raised. Project was cancelled before crane was installed, built in 2008 has been sitting in a warehouse till I got it. Everything functions, works great. Will ship I'm 10 miles west of Milwaukee if you would like to inspect or pickup. No warranty but Gaurenteed not DOA Jeff 262 227 7774  262 782 0449

Directions

Similar products from Other Workholding Tools

240G Proto Tools Professional Long Reach Pliers, USA

240G Proto Tools Professional Long Reach Pliers, USA

  • Petersburg, Virginia, United States
  • May 16th
C Clamp J. H. WILLIAMS Co. AGRIPPA 8" No 108 Heavy Duty Drop Forged C Clamp, USA

C Clamp J. H. WILLIAMS Co. AGRIPPA 8" No 108 Heavy Duty Drop Forged C Clamp, USA

  • Saunderstown, Rhode Island, United States
  • May 16th
MACHINIST LATHE MILL Setup / Holding Blocks Parallels Lot Nice Condition

MACHINIST LATHE MILL Setup / Holding Blocks Parallels Lot Nice Condition

  • San Pedro, California, United States
  • May 15th
Tag ST375350, Metal tag band Joint or set up of 2 tags.

Tag ST375350, Metal tag band Joint or set up of 2 tags.

  • Prospect Heights, Illinois, United States
  • May 14th
7 pars Original SNAP JAWS Quick Change Vice Size: 6" Milling Machine CNC Kurt

7 pars Original SNAP JAWS Quick Change Vice Size: 6" Milling Machine CNC Kurt

  • Waukegan, Illinois, United States
  • May 14th
Indexing plunger without rest position with lock nut IP-0613-M10x1.0-5-5-AK-ST

Indexing plunger without rest position with lock nut IP-0613-M10x1.0-5-5-AK-ST

  • Diamond Bar, California, United States
  • May 13th
RIDGID 44315 Wedges Set E-1163 NEW, NEVER USED!

RIDGID 44315 Wedges Set E-1163 NEW, NEVER USED!

  • Fraser, Michigan, United States
  • May 13th
HOFMANN GERMANY DIVIDING HEAD EXC CLEAN CONDITION HIGH END MACHINIST TOOL NICE!

HOFMANN GERMANY DIVIDING HEAD EXC CLEAN CONDITION HIGH END MACHINIST TOOL NICE!

  • San Pedro, California, United States
  • May 12th
SET OF TWO * 9" Drill Press Locking Clamp Vise Grip Pliers Heavy Duty 9 Inch x 2

SET OF TWO * 9" Drill Press Locking Clamp Vise Grip Pliers Heavy Duty 9 Inch x 2

  • Daytona Beach, Florida, United States
  • May 12th
ROTHFUSS TOOL CO. G2 ANGLE DRESSER AND TOOL HOLDER

ROTHFUSS TOOL CO. G2 ANGLE DRESSER AND TOOL HOLDER

  • Livonia, Michigan, United States
  • May 11th
T-Handle Pull dowels (4sizes) tool an die

T-Handle Pull dowels (4sizes) tool an die

  • Bronson, Florida, United States
  • May 10th
New Airetool 2662633 Tube End Facer TEF-1006 1

New Airetool 2662633 Tube End Facer TEF-1006 1" (25.4mm) 10-18 Gauge Bit- show original title

  • Richmond, Virginia, United States
  • May 9th
Dumore Model K11 Tool Post Grinder Accessory with Case

Dumore Model K11 Tool Post Grinder Accessory with Case

  • Northridge, California, United States
  • May 8th
LNS Model Super HydroBar 3.20 HS 4.8 Magazine Style Barfeed (2008)

LNS Model Super HydroBar 3.20 HS 4.8 Magazine Style Barfeed (2008)

  • United States
  • May 8th
HI QUALITY34MM- 60MM ENGINE CYLINDER HONE KIT-HONING MACHINE ATTACH+HONING STONE

HI QUALITY34MM- 60MM ENGINE CYLINDER HONE KIT-HONING MACHINE ATTACH+HONING STONE

  • DELHI, DELHI, India
  • May 7th
HARDINGE 1-1/16" STOCK PULLER - 5/8" SHANK

HARDINGE 1-1/16" STOCK PULLER - 5/8" SHANK

  • Isanti, Minnesota, United States
  • May 7th
Cleko 1/4 Spring Loaded Wedge Loc Cleco Fastener - Lot of 10 - I0814

Cleko 1/4 Spring Loaded Wedge Loc Cleco Fastener - Lot of 10 - I0814

  • Danville, Virginia, United States
  • May 6th
ROCKWELL DP-662 11" X 12" DRILL PRESS TABLE

ROCKWELL DP-662 11" X 12" DRILL PRESS TABLE

  • Beaver Falls, Pennsylvania, United States
  • May 6th
NEW POWER LIFT MAG-MATE PNL0250 Lifting Magnet, 250 lb Cap, 5 In OAL

NEW POWER LIFT MAG-MATE PNL0250 Lifting Magnet, 250 lb Cap, 5 In OAL

  • Canastota, New York, United States
  • May 6th
CNC MILLING MACHINE KENNAMETAL HERTEL CAT40 CV40BHC100462 HYDRAULIC TOOL HOLDER

CNC MILLING MACHINE KENNAMETAL HERTEL CAT40 CV40BHC100462 HYDRAULIC TOOL HOLDER

  • South El Monte, California, United States
  • May 5th

People who viewed this item also vieved

NEW Z LIVE CENTER ZLCH03002MT3 Carbide Tipped Live Center, Morse Taper 3, Alloy

NEW Z LIVE CENTER ZLCH03002MT3 Carbide Tipped Live Center, Morse Taper 3, Alloy

  • United States
  • Jan 30th
NEW Royal Products 10104 4 MT Spindle Type Live Center With Standard Point

NEW Royal Products 10104 4 MT Spindle Type Live Center With Standard Point

  • United States
  • Jan 30th
NEW Royal Products 10412 2 MT Quad-Bearing Live Center With Standard Point

NEW Royal Products 10412 2 MT Quad-Bearing Live Center With Standard Point

  • United States
  • Jan 30th
CUSHMAN 5" INCH LATHE CHUCK REF NO 5234B

CUSHMAN 5" INCH LATHE CHUCK REF NO 5234B

  • United States
  • Jan 30th
8.5" HYDRAULIC POWER LATHE CHUCK W/ PLAIN BACK MOUNT

8.5" HYDRAULIC POWER LATHE CHUCK W/ PLAIN BACK MOUNT

  • Chino, California, United States
  • Jan 30th
Kurt Mfg. Model DL400C Vises

Kurt Mfg. Model DL400C Vises

  • Ashland, Ohio, United States
  • Jan 30th
CNC Machining Side Clamp

CNC Machining Side Clamp

  • Lindenhurst, New York, United States
  • Jan 30th
STAUFF TYPE GR.4 IV HYDRAULIC PIPE CONDUIT MOUNTING 1/2" Tube Twin Series Clamp

STAUFF TYPE GR.4 IV HYDRAULIC PIPE CONDUIT MOUNTING 1/2" Tube Twin Series Clamp

  • United States
  • Jan 30th
Three (3) KANT TWIST Clamps #415 4-1/2D ~ USA Made

Three (3) KANT TWIST Clamps #415 4-1/2D ~ USA Made

  • Spokane, Washington, United States
  • Jan 30th
UP TO 2 NEW PARLEC GOLD SEAL ER40 .772" ID COLLET COOLANT SEALS CSER40-0772

UP TO 2 NEW PARLEC GOLD SEAL ER40 .772" ID COLLET COOLANT SEALS CSER40-0772

  • Rochester, New York, United States
  • Jan 30th
UP TO 6 NEW PARLEC GOLD SEAL ER40 .536" ID COLLET COOLANT SEALS CSER40-0536

UP TO 6 NEW PARLEC GOLD SEAL ER40 .536" ID COLLET COOLANT SEALS CSER40-0536

  • Rochester, New York, United States
  • Jan 30th
NEW PARLEC GOLD SEAL 1.303" ID COLLET COOLANT SEALS 150PG CSPG150-1303

NEW PARLEC GOLD SEAL 1.303" ID COLLET COOLANT SEALS 150PG CSPG150-1303

  • Rochester, New York, United States
  • Jan 30th
HUBBELL HBL1785 PRESSWITCH PLATE GRAY NEW FREE SHIPPING IN US

HUBBELL HBL1785 PRESSWITCH PLATE GRAY NEW FREE SHIPPING IN US

  • Simpsonville, South Carolina, United States
  • Jan 30th
Machinist Fixture

Machinist Fixture

  • Berlin, Connecticut, United States
  • Jan 30th
Machinist Fixtures lot of 2 Fixtures or Tooling

Machinist Fixtures lot of 2 Fixtures or Tooling

  • Berlin, Connecticut, United States
  • Jan 30th
PALMGREN 3" VISE MACHINIST

PALMGREN 3" VISE MACHINIST

  • Naperville, Illinois, United States
  • Jan 30th
Wilton 2" Baby Bullet Vise with Power Arm Jr - Clean One

Wilton 2" Baby Bullet Vise with Power Arm Jr - Clean One

  • Bayville, New Jersey, United States
  • Jan 30th
Starrett Athol 924 1/2 Swivel Machinist Vise Anvil 4 1/2"

Starrett Athol 924 1/2 Swivel Machinist Vise Anvil 4 1/2"

  • Rancho Cucamonga, California, United States
  • Jan 30th
MACHINIST LATHE MILL Ground & Hardened MICRO Set Up Hold Down Blocks Sherline

MACHINIST LATHE MILL Ground & Hardened MICRO Set Up Hold Down Blocks Sherline

  • Morris Plains, New Jersey, United States
  • Mar 12th
MACHINIST TOOLS LATHE MILL Machinist Lot of Ground Hardened Blocks Sine Bar

MACHINIST TOOLS LATHE MILL Machinist Lot of Ground Hardened Blocks Sine Bar

  • Morris Plains, New Jersey, United States
  • Mar 12th
Vintage Matched PAIR of Precision V BLOCKS & Clamp Millwork Grinding Inspection

Vintage Matched PAIR of Precision V BLOCKS & Clamp Millwork Grinding Inspection

  • Saint Regis Falls, New York, United States
  • Mar 25th
Palmgren 9634103 Rotary Cross Slide Table w/ Angle 10"

Palmgren 9634103 Rotary Cross Slide Table w/ Angle 10"

  • Wayland, Michigan, United States
  • Apr 29th
Palmgren 9632806 Horizontal/Vertical Rotary Table 8"

Palmgren 9632806 Horizontal/Vertical Rotary Table 8"

  • Wayland, Michigan, United States
  • Apr 29th
Palmgren 9637123 Dual Cross Slide Table 6" x 12"

Palmgren 9637123 Dual Cross Slide Table 6" x 12"

  • Wayland, Michigan, United States
  • Apr 29th
USED UNIVERSAL ENG. DOUBLE TAPER SERIES "XZ" COLLET CHUCK (2.25"-SHANK) 562847

USED UNIVERSAL ENG. DOUBLE TAPER SERIES "XZ" COLLET CHUCK (2.25"-SHANK) 562847

  • Fairfield, Iowa, United States
  • May 15th
Mandrino Bakuer P ISO30 4-16 Collet Chuck Set

Mandrino Bakuer P ISO30 4-16 Collet Chuck Set

  • Garden City, Idaho, United States
  • May 16th
GRINDER SPINDLE grinding machine tool 3 1/8" OD

GRINDER SPINDLE grinding machine tool 3 1/8" OD

  • Milroy, Indiana, United States
  • May 16th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies