UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 0

UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 1

UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 2

UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 3

UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 4

UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 5

UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 6

UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 7

UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 8

UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 9

UNISAW extension wing LTA-402 machined to add a router table to your saw, US $165.00 – Picture 10

Unisaw Extension Wing Lta-402 Machined To Add A Router Table To Your Saw

US $165.00

Freeland, Michigan, United States
Feb 17th

Open on mobile:
QR code

MODIFIED UNISAW TABLE WING - ADDS ROUTER TABLE CAPABILITY TO YOUR EXISTING TABLE SAW. The heavy cast iron extension wing, when combined with the mass of your vintage Unisaw, makes a great router table. This sale is for one (1) Unisaw extension wing, modified as described below, to accept a Bosch router, adding a very stable and functional router table on the far right side of your Delta table saw. We CNC machine a standard vintage Unisaw extension wing to accept the Bosch inverted router base, making the saw and its extension wing into a permanent router table. Good router tables cost hundreds of $$, take up additional room in your workshop, and may only get occasional use. This modified wing provides you an excellent router table at minimal cost, with no lost space, and with maximum versatility. The modifications and machining work are intended to mount the Bosch 1617 router, one of the very popular and most common routers on the market. Bosch offers a fixed base, p/n RA1165 that is made for inverted router table use. The RA1165 base can be readily purchased separately. The fixed base bolts to the underside of the router table, accepts the standard 1617 router motor, and allows for a tee handle hex wrench to adjust the router bit’s height from above. Research these two Bosch part numbers to learn more about the router components and their features. We have machined the Unisaw cast iron table wing, Delta p/n LTA-402, to accept the Bosch router, without any detrimental effect on the casting or its functionality. The bottom side of the wing has been machined to provide a flat surface for the router base to attach. The table thickness after machining is still some 5/16”, leaving adequate material for the three (3) counter bored socket head cap screws that mount the router base to the underside. A fourth hole provides access for the 3mm hex key for adjusting the router’s height. The center hole is 2.0” in diameter. The router is located on the left to right centerline of the wing and about 7” back from the front edge. This position allows for the base, complete with router motor in place, to remain clear of the saw’s motor and any other interference, regardless of blade height or angle. The router motor can be permanently left in place, or installed and removed from the bolt-on base whenever it is needed. The saw’s fence works equally well as a fence for the router table. The photos show the modifications to the extension wing, the fixed router base, and the components when bolted into place. Note where the router is located, and the proximity of the Unisaw fence, in the photos that were taken from above. We have two modified wings on hand at this time. Both are Delta p/n LTA-402. One is 27” x 8” (SOLD) for an older Unisaw and the other is 27.25” x 8” for a later version Unisaw. Both bolt up on all years of Unisaws. Both are in excellent shape with no dings, drilled holes, or damage. Included with each machined wing are the three stainless steel socket head bolts to mount the base and a tee handled hex key for adjusting the router height. The extension wing will be securely packaged in a custom made box and shipped via FedEx Ground to the buyer’s address. The cost of shipping will be determined based on the buyer’s zip code and will be added at actual cost to the sale price, and then invoiced. Please do not make payment until invoiced. (eBay required that I "estimate" shipping, so I put down $30.00. However, the freight will be whatever the actual FedEx Ground cost is to your zip.) For those who don’t want or need another Unisaw table wing, we can machine your LTA-402 casting if you prefer. We will also consider an exchange program, if the trade-in casting is blemish free. Contact me to discuss the price of the machining, the required turnaround time, and freight issues. One last note…..if you have a Bosch 1617 router with the round wooden handles, you already own an inverted base. If you remove the black plate from the router’s bottom, the base is the same part as the inverted base RA1165. Just check to make sure your base accepts a 3mm hex key at the opposite end of the shaft from the fine adjustment knob. Payment by PayPal is preferred. Payment must be received within five days of the auction close. If our other Delta Unisaw, conventional table saw, and other Delta equipment items are not currently listed on eBay, please contact us. We manufacture and offer the following parts for improving, upgrading, and/or restoring your vintage Delta Unisaw or shaper: Hard-to-find LH threaded arbor nuts A new and improved blade wrench A unique "no-drill" wrench hanger Improved Allen bolt rail mounting kit A heavy duty billet aluminum miter fence A stainless steel bolt kit for reassembling your vintage Unisaw New stainless steel Unisaw and Delta Mfg switch plates New stainless steel vertical Delta dust door nameplate Replacement Delta Unisaw and shaper toggle switches Replacement brass bullets for the vertical and tilt lock shafts Economical replacement dust doors A billet aluminum rear fence clamp block and spring return kit Delta OEM fence rear clamp blocks New “Saturn” knobs and stainless shafts for your Jet Lock fence lock A stainless steel Unisaw motor mount pivot pin Dealer inquiries are welcome. Quantity inquires will get attention. We will build to order on request. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.