+ Post new Ad
Universal Action Wrench Handle, US $37.95 – Picture 0
Universal Action Wrench Handle, US $37.95 – Picture 0

Universal Action Wrench Handle

US $37.95

  • Terrebonne, Oregon, United States
  • Jan 30th
Open on mobile:
QR code
The Master Gun Parts handle fits our Garand Receiver Wrench and Winchester Model 70 Receiver Block. The MGP handle mounts in the parallel position to the wrench block so that the handle points out, instead of down as with many other handles. With the handle level, it is easier to tighten or loosen the receiver by pushing downward on the handle. Because the handle stock is flat, pressure on the palm of the hand is reduced. This handle has been tested beyond 400 foot pounds. The Master Gun Parts handle fits wrench blocks with 1/2" diameter bolt holes on 3" or 3-1/4" centers. The handle is approximately 16" long and 1" square. Made from 6061T6  High-Strength Aluminum.   Made in the:
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Enter your own
Type Tool

Directions

Similar products from Fast Change Tools

Schunk Hydraulic Expansion tool holder HSK 63 A 10 mm 0204053

Schunk Hydraulic Expansion tool holder HSK 63 A 10 mm 0204053

  • Collegeville, Pennsylvania, United States
  • Jan 30th
Parlec Numertap System 700 Quick Change Tap Collet Holder

Parlec Numertap System 700 Quick Change Tap Collet Holder

  • Johnson City, New York, United States
  • Jan 30th
KDK STYLE-100 QUICK CHANGE TOOL POST

KDK STYLE-100 QUICK CHANGE TOOL POST

  • Chino, California, United States
  • Jan 30th
KDK-100 STYLE T-NUT BLANK 1/2 X 1-1/2 X 2-1/4 WITH SCREW (3900-5436)

KDK-100 STYLE T-NUT BLANK 1/2 X 1-1/2 X 2-1/4 WITH SCREW (3900-5436)

  • Chino, California, United States
  • Jan 30th
Kennametal KM50 Cutting Unit 290631R03S02 (Inv.26674)

Kennametal KM50 Cutting Unit 290631R03S02 (Inv.26674)

  • Portland, Connecticut, United States
  • Jan 30th
Kennametal KM50 Cutting Unit 337478R00 (Inv.26677)

Kennametal KM50 Cutting Unit 337478R00 (Inv.26677)

  • Portland, Connecticut, United States
  • Jan 30th
Kennametal KM50 Cutting Unit 290634R01 (Inv.26678)

Kennametal KM50 Cutting Unit 290634R01 (Inv.26678)

  • Portland, Connecticut, United States
  • Jan 30th
TOOL POST HOLDER #1 250-401, TURNING&FACING HOLDER,CA, 14- 20" Lathe Swing,/KK1/

TOOL POST HOLDER #1 250-401, TURNING&FACING HOLDER,CA, 14- 20" Lathe Swing,/KK1/

  • Saint Peters, Missouri, United States
  • Jan 30th
QUICK CHANGE TAP ADAPTER Techleader ME2 15MM AND 3/8"

QUICK CHANGE TAP ADAPTER Techleader ME2 15MM AND 3/8"

  • Auburn, Indiana, United States
  • Jan 30th
AXA(100 Series) Piston Quick Change Tool Post & Holders

AXA(100 Series) Piston Quick Change Tool Post & Holders

  • Chino, California, United States
  • Jan 30th
Nikken ZK12 8mm ISO Tap Adapter Bilz Size 1 Quick Change **NEW**

Nikken ZK12 8mm ISO Tap Adapter Bilz Size 1 Quick Change **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
Kwik Switch 200 1/2 inch Shell Mill Arbor

Kwik Switch 200 1/2 inch Shell Mill Arbor

  • Holland, Ohio, United States
  • Jan 30th
USED TM SMITH BILZ #2 TAP COLLET / ADAPTER 5/16" HAND TAP .3125"

USED TM SMITH BILZ #2 TAP COLLET / ADAPTER 5/16" HAND TAP .3125"

  • Fairfield, Iowa, United States
  • Jan 30th
DORIAN QUICK CHANGE INDEXABLE TURNING TOOL HOLDER D35CXA-16C

DORIAN QUICK CHANGE INDEXABLE TURNING TOOL HOLDER D35CXA-16C

  • Chino, California, United States
  • Jan 30th
END MILL HOLDER CNC CAT40 1/8" x 2.5" LONG BALANCED TO 20,000 RPM Shars NEW!!!

END MILL HOLDER CNC CAT40 1/8" x 2.5" LONG BALANCED TO 20,000 RPM Shars NEW!!!

  • Largo, Florida, United States
  • Jan 30th
KDK-105 boring bar holder 1"

KDK-105 boring bar holder 1"

  • Montebello, California, United States
  • Jan 30th
NEW CUT-OFF HOLDER A FOR 40 POSITION QC TOOL POST B

NEW CUT-OFF HOLDER A FOR 40 POSITION QC TOOL POST B

  • Carrollton, Ohio, United States
  • Jan 30th
Aloris AXA-10 Quick Change Knurling Holder for Tool Post Made In USA

Aloris AXA-10 Quick Change Knurling Holder for Tool Post Made In USA

  • Carrollton, Ohio, United States
  • Jan 30th
NEW PHASE II 250-307 QUICK CHANGE TOOL POST PARTING BLADE HOLDER CXA #7

NEW PHASE II 250-307 QUICK CHANGE TOOL POST PARTING BLADE HOLDER CXA #7

  • Fairfield, Iowa, United States
  • Jan 30th
NEW PHASE II 250-310 QUICK CHANGE TOOL POST KNURLING & TURNING HOLDER CXA #10

NEW PHASE II 250-310 QUICK CHANGE TOOL POST KNURLING & TURNING HOLDER CXA #10

  • Fairfield, Iowa, United States
  • Jan 30th

People who viewed this item also vieved

LYNDEX CAT 50 FACE MILL ADAPTER 3/4" ARBOR STK 6226

LYNDEX CAT 50 FACE MILL ADAPTER 3/4" ARBOR STK 6226

  • Wadley, Alabama, United States
  • May 24th
CINCINNATI MILICRON CAT45 1 3/8" SHELL MILL TOOL HOLDER

CINCINNATI MILICRON CAT45 1 3/8" SHELL MILL TOOL HOLDER

  • Santa Clarita, California, United States
  • May 24th
Van Norman 944S Boring Bar OEM Cats Paws Size A / 1 , with OEM Screws, 777, 944

Van Norman 944S Boring Bar OEM Cats Paws Size A / 1 , with OEM Screws, 777, 944

  • Scottsdale, Arizona, United States
  • May 25th
Van Norman 944S Boring Bar OEM Cats Paws Size E / 5 , with OEM Screws, 777

Van Norman 944S Boring Bar OEM Cats Paws Size E / 5 , with OEM Screws, 777

  • Scottsdale, Arizona, United States
  • May 25th
NOS HEAVY KYSOR-DIJET Indexable Tool Holder Metal Lathe 1 1/4" Square 7" Lng.

NOS HEAVY KYSOR-DIJET Indexable Tool Holder Metal Lathe 1 1/4" Square 7" Lng.

  • Troy, Michigan, United States
  • May 27th
4 Diff. HEAVY KYSOR-DIJET Indexable Tool Holders Metal Lathe 6" Long 1" Square

4 Diff. HEAVY KYSOR-DIJET Indexable Tool Holders Metal Lathe 6" Long 1" Square

  • Troy, Michigan, United States
  • May 27th
BRAND NEW MADE BY WELDON NST 50 TAPER -1" END MILL ADAPTER FREE SHIPPING

BRAND NEW MADE BY WELDON NST 50 TAPER -1" END MILL ADAPTER FREE SHIPPING

  • Seekonk, Massachusetts, United States
  • May 27th
# 2 morse taper shank extended arbor #2 to #2 drilling lathe deep holes

# 2 morse taper shank extended arbor #2 to #2 drilling lathe deep holes

  • Hopatcong, New Jersey, United States
  • May 27th
Drill Bushings

Drill Bushings

  • Live Oak, Florida, United States
  • May 29th
Fenner Keyless Bushings 1-1/2" Part #6202400 Zinc Coated

Fenner Keyless Bushings 1-1/2" Part #6202400 Zinc Coated

  • South Dayton, New York, United States
  • May 29th
PARLEC BT40 ER16 COLLET CHUCK 3" PROJECTION STK9117

PARLEC BT40 ER16 COLLET CHUCK 3" PROJECTION STK9117

  • Wadley, Alabama, United States
  • May 30th
BT40 ER32 COLLET CHUCK 2.7 PROJECTION STK9116

BT40 ER32 COLLET CHUCK 2.7 PROJECTION STK9116

  • Wadley, Alabama, United States
  • May 30th
1-3/4" Bore Turret Lathe Long Flange Flanged Bar Tool Holder J&L #7A

1-3/4" Bore Turret Lathe Long Flange Flanged Bar Tool Holder J&L #7A

  • Lorain, Ohio, United States
  • Jun 5th
SE-16-4 Straight Negative Rake Lathe Carbide Turning Holder 1" Shank w/ 3 Insert

SE-16-4 Straight Negative Rake Lathe Carbide Turning Holder 1" Shank w/ 3 Insert

  • Lorain, Ohio, United States
  • Jun 5th
Lot of Assorted Drill Chucks and Chuck Keys 757-443

Lot of Assorted Drill Chucks and Chuck Keys 757-443

  • Hillsdale, New Jersey, United States
  • Jun 9th
CIC No. 2500 Manual Impact Driver 9572-68

CIC No. 2500 Manual Impact Driver 9572-68

  • Hillsdale, New Jersey, United States
  • Jun 9th
Sunnen Bushing Expander Mandrel AL-960 and One AL-12 with Facing Cutter and Bit

Sunnen Bushing Expander Mandrel AL-960 and One AL-12 with Facing Cutter and Bit

  • Scottsdale, Arizona, United States
  • Jun 20th
Sunnen Bushing Expander Mandrel AL-900 and One AL-12 with Facing Cutter and Bit

Sunnen Bushing Expander Mandrel AL-900 and One AL-12 with Facing Cutter and Bit

  • Scottsdale, Arizona, United States
  • Jun 20th
5HP 4KW 400HZ VFD Inverter Frequency converter 3ph 220V to 3ph 220V 18A

5HP 4KW 400HZ VFD Inverter Frequency converter 3ph 220V to 3ph 220V 18A

  • DongGuan, China
  • Oct 30th
4HP 3KW 400HZ VFD Inverter Frequency converter 3ph 220V to 3ph 220V 13A

4HP 3KW 400HZ VFD Inverter Frequency converter 3ph 220V to 3ph 220V 13A

  • DongGuan, China
  • Oct 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies