+ Post new Ad
UNIVERSAL ENGINEERING CAT 50 /V-FLANGE COLLET CHUCK / 154-157, US $500 – Picture 0
UNIVERSAL ENGINEERING CAT 50 /V-FLANGE COLLET CHUCK / 154-157, US $500 – Picture 1
UNIVERSAL ENGINEERING CAT 50 /V-FLANGE COLLET CHUCK / 154-157, US $500 – Picture 0
UNIVERSAL ENGINEERING CAT 50 /V-FLANGE COLLET CHUCK / 154-157, US $500 – Picture 1

Universal Engineering Cat 50 /v-flange Collet Chuck / 154-157

US $500

  • Odessa, Florida, United States
  • Jan 30th
Open on mobile:
QR code
FOUR (4) USED….. "UNIVERSAL ENGINEERING"  ACURA-GRIP COLLET CHUCK….. Type: Cat 50 / V-Flange Model: 91957 Condition: Good General Specifications: Collet Range: 7/32"  -  1" Approximate Weight: 10 Lbs Complete With: ?   One (1) #901001 Nut ?   One (1) Acura-Grip 3/4" Collet ?   One (1) Retention Knob PRICE: F. O. B. Odessa, Florida…..$75.00 EACH (Plus any applicable taxes.)
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Good condition.”

Directions

Similar products from Collet Chucks & Sets

3MT ER32 18PC COLLET SET / WRENCH & CASE B423

3MT ER32 18PC COLLET SET / WRENCH & CASE B423

  • Montville, Ohio, United States
  • Jan 30th
4MT ER40 23PC COLLET SET WITH WRENCH & CASE B424

4MT ER40 23PC COLLET SET WITH WRENCH & CASE B424

  • Montville, Ohio, United States
  • Jan 30th
OERTLI Woodworking 2207405 ISO 30 Shaft CNC Tool Holder D=25mm DKW x L=100mm

OERTLI Woodworking 2207405 ISO 30 Shaft CNC Tool Holder D=25mm DKW x L=100mm

  • Redwood Falls, Minnesota, United States
  • Jan 30th
Young Bros. Stamp Works 1/8 inch Steel Set 28 Characters

Young Bros. Stamp Works 1/8 inch Steel Set 28 Characters

  • Paris, Texas, United States
  • Jan 30th
HARDINGE 5C COLLET CHUCK Model # 5CL for LEBLOND LATHE

HARDINGE 5C COLLET CHUCK Model # 5CL for LEBLOND LATHE

  • Cedar, Minnesota, United States
  • Jan 30th
Collis Collet Chuck NMTB # 50 Series TG150 & Wrench USA

Collis Collet Chuck NMTB # 50 Series TG150 & Wrench USA

  • Columbus, Ohio, United States
  • Jan 30th
Young Bros Stamp Works 5 pc Symbol Set MADE IN USA Asterisk Star Pound Plus

Young Bros Stamp Works 5 pc Symbol Set MADE IN USA Asterisk Star Pound Plus

  • Columbus, Ohio, United States
  • Jan 30th
UNIVERSAL ENGINEERING KWIK-SWITCH DOUBLE TAPER COLLET CHUCKw/Nut & Collets (201)

UNIVERSAL ENGINEERING KWIK-SWITCH DOUBLE TAPER COLLET CHUCKw/Nut & Collets (201)

  • Odessa, Florida, United States
  • Jan 30th
UNIVERSAL ENGINEERING ACURA-GRIP CAT 50 / V-FLANGE COLLET CHUCK /146

UNIVERSAL ENGINEERING ACURA-GRIP CAT 50 / V-FLANGE COLLET CHUCK /146

  • Odessa, Florida, United States
  • Jan 30th
MT3 8 PCs Quick Change Set Collet Chuck End Mill Block Holder 1/4" - 1" Collets

MT3 8 PCs Quick Change Set Collet Chuck End Mill Block Holder 1/4" - 1" Collets

  • Pomona, California, United States
  • Jan 30th
UNIVERSAL ENGINEERING CAT 50 /V-FLANGE COLLET CHUCK / 147-153

UNIVERSAL ENGINEERING CAT 50 /V-FLANGE COLLET CHUCK / 147-153

  • Odessa, Florida, United States
  • Jan 30th
UNIVERSAL ENGINEERING AT 50 V-FLANGE COLLET CHUCK /164-167

UNIVERSAL ENGINEERING AT 50 V-FLANGE COLLET CHUCK /164-167

  • Odessa, Florida, United States
  • Jan 30th
UNIVERSAL ENGINEERING ACURA-GRIP CAT 50 V-FLANGE COLLET CHUCK /173

UNIVERSAL ENGINEERING ACURA-GRIP CAT 50 V-FLANGE COLLET CHUCK /173

  • Odessa, Florida, United States
  • Jan 30th
USED BIG-DAISHOWA BT40 NBN-16 NEW BABY COLLET CHUCK BHDT-90065

USED BIG-DAISHOWA BT40 NBN-16 NEW BABY COLLET CHUCK BHDT-90065

  • Fairfield, Iowa, United States
  • Jan 30th
USED VALENITE CAT45 TG100 EXTENDED LENGTH COLLET CHUCK CAT-45 x TG-100 x 8" Gage

USED VALENITE CAT45 TG100 EXTENDED LENGTH COLLET CHUCK CAT-45 x TG-100 x 8" Gage

  • Fairfield, Iowa, United States
  • Jan 30th
UNIVERSAL ENGINEERING ACURA-GRIP CAT 50 V-FLANGE COLLET CHUCK / 172

UNIVERSAL ENGINEERING ACURA-GRIP CAT 50 V-FLANGE COLLET CHUCK / 172

  • Odessa, Florida, United States
  • Jan 30th
UNIVERSAL ENGINEERING CAT-50 V-FLANGE COLLET CHUCKS (158)

UNIVERSAL ENGINEERING CAT-50 V-FLANGE COLLET CHUCKS (158)

  • Odessa, Florida, United States
  • Jan 30th
LAST ONE! USED #3MT TAPER SHANK DA300 COLLET CHUCK EXTENSION DA-300

LAST ONE! USED #3MT TAPER SHANK DA300 COLLET CHUCK EXTENSION DA-300

  • Fairfield, Iowa, United States
  • Jan 30th
Scully Jones 57895 Single-Angle Collet Chuck .047-.750 Capacity Used

Scully Jones 57895 Single-Angle Collet Chuck .047-.750 Capacity Used

  • Rochester, New York, United States
  • Jan 30th
3 Soft Face Emergency Collet Pads Warner & Swasey # 4

3 Soft Face Emergency Collet Pads Warner & Swasey # 4

  • Carrollton, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

TWO NEW TG 150 Collet - TG150 Sizes: 1", 1-1/2"

TWO NEW TG 150 Collet - TG150 Sizes: 1", 1-1/2"

  • Holland, Ohio, United States
  • May 26th
machinist tool,Hardinge 2J 3/4" square collet,south bend lathe

machinist tool,Hardinge 2J 3/4" square collet,south bend lathe

  • Bennington, New Hampshire, United States
  • May 26th
NEW TECHNIKS-SYIC STRAIGHT SEALED COOLANT COLLET 20MM OD 8MM ID D14170

NEW TECHNIKS-SYIC STRAIGHT SEALED COOLANT COLLET 20MM OD 8MM ID D14170

  • Dayton, Ohio, United States
  • May 26th
Suburban Tool Angle Sine Plate Model SP-66-S1

Suburban Tool Angle Sine Plate Model SP-66-S1

  • Naperville, Illinois, United States
  • May 26th
24" X 18" X 2" STEEL T-SLOT TABLE FIXTURE INDUSTRIAL NICE CLEAN

24" X 18" X 2" STEEL T-SLOT TABLE FIXTURE INDUSTRIAL NICE CLEAN

  • Hadley, Pennsylvania, United States
  • May 26th
Step Angle Plate (American Made)

Step Angle Plate (American Made)

  • Chalfont, Pennsylvania, United States
  • May 26th
Morton Die Cast Zinc Handle Adjustable Clamping Lever with Stud, Metric Size,

Morton Die Cast Zinc Handle Adjustable Clamping Lever with Stud, Metric Size,

  • USA, United States
  • May 28th
Morton Die Cast Zinc Handle Adjustable Clamping Lever with Stud, Inch Size,

Morton Die Cast Zinc Handle Adjustable Clamping Lever with Stud, Inch Size,

  • USA, United States
  • May 28th
Five Miniature Precision C-Clamps. Free US Shipping

Five Miniature Precision C-Clamps. Free US Shipping

  • Mechanicsville, Virginia, United States
  • May 28th
ATLAS CRAFTSMAN 6" LATHE ATLAS 3 JAW SELF CENTERING 4" DIA CHUCK 1 x 8 TPI

ATLAS CRAFTSMAN 6" LATHE ATLAS 3 JAW SELF CENTERING 4" DIA CHUCK 1 x 8 TPI

  • Hatboro, Pennsylvania, United States
  • May 29th
MACHINIST TOOLS * GEORGE SCHERR MAGNETIC TRANSFER BLOCKS

MACHINIST TOOLS * GEORGE SCHERR MAGNETIC TRANSFER BLOCKS

  • Camarillo, California, United States
  • May 29th
MACHINIST TOOLS * DEAD CENTER STRAIGHT SHAFT * .815

MACHINIST TOOLS * DEAD CENTER STRAIGHT SHAFT * .815

  • Camarillo, California, United States
  • May 29th
Center Ground on Hutchinson 5/8" low Rod

Center Ground on Hutchinson 5/8" low Rod

  • Lebanon, Tennessee, United States
  • May 29th
15mm Shank Center Insert

15mm Shank Center Insert

  • Lebanon, Tennessee, United States
  • May 29th
Collis 622 08L, #8 Jarno

Collis 622 08L, #8 Jarno

  • Lebanon, Tennessee, United States
  • May 29th
VINTAGE SMALL BENCH VISE,2.25" JAW OPENING

VINTAGE SMALL BENCH VISE,2.25" JAW OPENING

  • Chicago Heights, Illinois, United States
  • May 29th
Prototrak DPM Spindle Motor Assembly

Prototrak DPM Spindle Motor Assembly

  • Epsom, New Hampshire, United States
  • May 29th
DUNLAP 5244 Swivel Bench Vise 3 1/2" Jaws

DUNLAP 5244 Swivel Bench Vise 3 1/2" Jaws

  • Lancaster, California, United States
  • May 30th
4" Arrow Magnetic Welding Holder 50lb Weight Limit

4" Arrow Magnetic Welding Holder 50lb Weight Limit

  • Monticello, Minnesota, United States
  • Jun 6th
NEW LYNDEX E16-022 COLLET, SIZE11/32" COLLAPSE RANGE .344"-.312"

NEW LYNDEX E16-022 COLLET, SIZE11/32" COLLAPSE RANGE .344"-.312"

  • Strongsville, Ohio, United States
  • Jun 6th
Indexable Cut Off Blade, MGIH-32-3PS, Single, Right Hand, 5- 7/8" OAL, /HS1/

Indexable Cut Off Blade, MGIH-32-3PS, Single, Right Hand, 5- 7/8" OAL, /HS1/

  • Saint Louis, Missouri, United States
  • Jun 6th
Haas HRT-600 Rotary CNC Table Full 4th axis 23" Diameter NEW!!!!

Haas HRT-600 Rotary CNC Table Full 4th axis 23" Diameter NEW!!!!

  • Rockford, Illinois, United States
  • Jun 9th
MOORE 10-5/8" ROTARY TABLE HORIZONTAL-VERTICAL W/LIFT HANDLE MILLING

MOORE 10-5/8" ROTARY TABLE HORIZONTAL-VERTICAL W/LIFT HANDLE MILLING

  • Highland, New York, United States
  • Jun 9th
Jacobs Spindle Nose Lathe Chuck Model 91-T1

Jacobs Spindle Nose Lathe Chuck Model 91-T1

  • Bell, California, United States
  • Jun 9th
Lufkin Pair Lufkin 6" Hold Downs Wedges 902E In Original Box Excellent Condition

Lufkin Pair Lufkin 6" Hold Downs Wedges 902E In Original Box Excellent Condition

  • Hollidaysburg, Pennsylvania, United States
  • Jun 9th
Suburban Tool 6" x 6" x 4" Hardened Steel Precision V-Block

Suburban Tool 6" x 6" x 4" Hardened Steel Precision V-Block

  • Venice, Florida, United States
  • Jun 9th
STARRETT Dial Test Indicator with Accessories - Model: 709ACZ Range: 0.060"

STARRETT Dial Test Indicator with Accessories - Model: 709ACZ Range: 0.060"

  • Flushing, New York, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies