+ Post new Ad
USA Lot of 100 ULTRA LUBE 10664 Drilling Tapping Tap Cutting Oil Fluid 2 oz USA, US $170 – Picture 0
USA Lot of 100 ULTRA LUBE 10664 Drilling Tapping Tap Cutting Oil Fluid 2 oz USA, US $170 – Picture 0

Usa Lot Of 100 Ultra Lube 10664 Drilling Tapping Tap Cutting Oil Fluid 2 Oz Usa

US $170

  • Houston, Texas, United States
  • Jun 22nd
Open on mobile:
QR code
NEW DRILLING AND TAPPING OIL FLUID SPECSBRAND: ULTRA LUBE DISTRIBUTED BY Plews-LubriMatic PART NUMBER: 10664 MADE IN AMERICA (USA) QUANTITY: Lot of 100, 2oz BOTTLES (59ml) = 200 oz of Tapping Oil Fluid / 5.91471 Liters (L) UltraLube Drilling and Tapping Fluid's superior lubricity helps reduce the operating temperature of drill bits and taps. Keeping tips cool and lubricated will help extend tool life and sharpness. Our Drilling and Tapping Fluid's high flash point and lubricity reduce smoking compared to conventional petroleum-based lubricants. Drill and tap faster with less heat using UltraLube. UltraLube bio-based greases and oils have 4-times the lubricity of petroleum-based greases and oils Naturally higher viscosity, which reduces friction, heat and wear especially in high-speed applications Mixes readily with conventional petroleum-based products Lasts longer than similar petroleum products and is less likely to thin down at higher temperatures Readily biodegradable and water neutral with no harsh odors makes it safer for you, your family and the environment  

Directions

Similar products from Coolant Gun Drills

USED MITSUBISHI CARBIDE TIPPED COOLANT DRILL 9/16 (.5625)

USED MITSUBISHI CARBIDE TIPPED COOLANT DRILL 9/16 (.5625)

  • Fairfield, Iowa, United States
  • Jun 23rd
USED MITSUBISHI CARBIDE TIPPED COOLANT DRILL 35/64 (.5469)

USED MITSUBISHI CARBIDE TIPPED COOLANT DRILL 35/64 (.5469)

  • Fairfield, Iowa, United States
  • Jun 23rd
USED MITSUBISHI CARBIDE TIPPED COOLANT DRILL 5/8 (.625)

USED MITSUBISHI CARBIDE TIPPED COOLANT DRILL 5/8 (.625)

  • Fairfield, Iowa, United States
  • Jun 23rd
Machinist Lot of 10) Tungsten Inc. 5/16" .312 Carbide Thread Step Drill *NR* AV1

Machinist Lot of 10) Tungsten Inc. 5/16" .312 Carbide Thread Step Drill *NR* AV1

  • Dallas, Texas, United States
  • Jun 23rd
A880 D1000LX25-05 SANDVIK CoroDrill

A880 D1000LX25-05 SANDVIK CoroDrill

  • Windsor, Connecticut, United States
  • Jun 23rd
5 WELL USED CARBIDE TIPPED GUN DRILLS .312" +/- Dia x .750" Shank x 15.25" OAL

5 WELL USED CARBIDE TIPPED GUN DRILLS .312" +/- Dia x .750" Shank x 15.25" OAL

  • Fairfield, Iowa, United States
  • Jun 22nd
AMEC Coolant Thru Spade Drill B-200-125 1-5/8" Drill Bit CNC Mill Machinist Lot

AMEC Coolant Thru Spade Drill B-200-125 1-5/8" Drill Bit CNC Mill Machinist Lot

  • Helenville, Wisconsin, United States
  • Jun 22nd
ISCAR SUMOCHAM DCN 140-070-16A-5D Indexable Drill

ISCAR SUMOCHAM DCN 140-070-16A-5D Indexable Drill

  • Round Lake, Illinois, United States
  • Jun 22nd
Komet 6" insert drill

Komet 6" insert drill

  • Harvey, Illinois, United States
  • Jun 22nd
3.45mm x 203mm Long Carbide Gun Drill Bit Coolant Fed Metric Feeding BOTEK K15

3.45mm x 203mm Long Carbide Gun Drill Bit Coolant Fed Metric Feeding BOTEK K15

  • Grand Rapids, Michigan, United States
  • Jun 22nd
SUMITOMO MDS3680MHV -W40024283 Coolant Through Carbide Drill

SUMITOMO MDS3680MHV -W40024283 Coolant Through Carbide Drill

  • Houston, Texas, United States
  • Jun 22nd
SUMITOMO MDS053LHV -W40024556 Coolant Through Carbide Drill

SUMITOMO MDS053LHV -W40024556 Coolant Through Carbide Drill

  • Houston, Texas, United States
  • Jun 22nd
YG 17/64x17/64x2-13/64x4-19/64 5XD Coolant Through Carbide Drill

YG 17/64x17/64x2-13/64x4-19/64 5XD Coolant Through Carbide Drill

  • Houston, Texas, United States
  • Jun 22nd
GAMMONS - COOLANT-FED GUN MAKERS REAMER -C33-601-9102R Rev.G (928-332-B)

GAMMONS - COOLANT-FED GUN MAKERS REAMER -C33-601-9102R Rev.G (928-332-B)

  • Oxford, Pennsylvania, United States
  • Jun 22nd
GUHRING Coolant Drill Bit 7.7mm 2534531 2nd Pass 14674110 USA [2111]

GUHRING Coolant Drill Bit 7.7mm 2534531 2nd Pass 14674110 USA [2111]

  • Saint Louis, Missouri, United States
  • Jun 22nd
MIKRON CrazyDrill Carbide Coolant Pilot Drills 2.720.3.00049-2052043 Qty2 <2104>

MIKRON CrazyDrill Carbide Coolant Pilot Drills 2.720.3.00049-2052043 Qty2 <2104>

  • Saint Louis, Missouri, United States
  • Jun 22nd
BOTEK Deep Hole Drill 0.104&#034; x 8.74&#034; WB-42556/TC02217 K15 &lt;2104&gt;

BOTEK Deep Hole Drill 0.104" x 8.74" WB-42556/TC02217 K15 <2104>

  • Saint Louis, Missouri, United States
  • Jun 22nd
SUMITOMO 050MHV-W40005295 Coolant Through Carbide Drill

SUMITOMO 050MHV-W40005295 Coolant Through Carbide Drill

  • Houston, Texas, United States
  • Jun 22nd
Sandvik 1603948 Regrind Coolant Fed Drill, Carbide / TiAIN

Sandvik 1603948 Regrind Coolant Fed Drill, Carbide / TiAIN

  • Bellingham, Washington, United States
  • Jun 22nd
NEW..SUMITOMO SOLID CARBIDE COOLANT THROUGH DRILL 3/8....30.00

NEW..SUMITOMO SOLID CARBIDE COOLANT THROUGH DRILL 3/8....30.00

  • Milwaukee, Wisconsin, United States
  • Jun 22nd

People who viewed this item also vieved

11/64 x 12&#034; OAL HS 118&#039; Drill Bit Straight Shank Made in USA-NEW-Pack of 1

11/64 x 12" OAL HS 118' Drill Bit Straight Shank Made in USA-NEW-Pack of 1

  • Brunswick, Georgia, United States
  • Jan 30th
3/8&#034; X 72&#034; Flexible Shaft Fish Bit

3/8" X 72" Flexible Shaft Fish Bit

  • Brooklyn, New York, United States
  • Jan 30th
3pc 7/16 PTD Drill Bits HSS 12 inches long MADE IN USA very sharp

3pc 7/16 PTD Drill Bits HSS 12 inches long MADE IN USA very sharp

  • Batavia, Ohio, United States
  • Jan 30th
NEW Magnetic Drill MD-45 &amp; 1&#034; Broach Bit / Annular Cutter Set - AUCTION!!!!

NEW Magnetic Drill MD-45 & 1" Broach Bit / Annular Cutter Set - AUCTION!!!!

  • Seattle, Washington, United States
  • Jan 30th
2 CLEVELAND JOBBER LENGTH Staight Shank / HS DRILL BIT 917 CLE-FORGE 41/64&#034;

2 CLEVELAND JOBBER LENGTH Staight Shank / HS DRILL BIT 917 CLE-FORGE 41/64"

  • Darien, Illinois, United States
  • Jan 30th
#60 HSS Ground Black Jobber Drills, (QTY 12)

#60 HSS Ground Black Jobber Drills, (QTY 12)

  • Hopkinsville, Kentucky, United States
  • Jan 30th
2pcs 1/4&#034; HSS TIN coated PTD USA 12&#034; OAL 9&#034; flute length

2pcs 1/4" HSS TIN coated PTD USA 12" OAL 9" flute length

  • Chicago, Illinois, United States
  • Jan 30th
SET OF 13 ASSORTED CENTER DRILLS &amp; 1 SPOT DRILL

SET OF 13 ASSORTED CENTER DRILLS & 1 SPOT DRILL

  • Randolph, New York, United States
  • Jan 30th
5 ITW DRILL BITS 5/16&#034; X 6-1/2&#034; No.71021 Dia.21/64&#034; TANGED

5 ITW DRILL BITS 5/16" X 6-1/2" No.71021 Dia.21/64" TANGED

  • Highland Park, Michigan, United States
  • Jan 30th
New Chicago-Latrobe EDP 48562 31/32&#034; Screw Machine Length Drill Bit Made In USA

New Chicago-Latrobe EDP 48562 31/32" Screw Machine Length Drill Bit Made In USA

  • Anaheim, California, United States
  • Jan 30th
#31(.1200)JOBBER(STD)SOLID CARBIDE 25DEG HELIX118DEG SPLIT PT DRILL BIT LOT of 3

#31(.1200)JOBBER(STD)SOLID CARBIDE 25DEG HELIX118DEG SPLIT PT DRILL BIT LOT of 3

  • Largo, Florida, United States
  • Jan 30th
11/16 SCREW MACHINE TWIST DRILL COBALT STEEL (PRECISION TWIST DRILL)

11/16 SCREW MACHINE TWIST DRILL COBALT STEEL (PRECISION TWIST DRILL)

  • Phoenix, Arizona, United States
  • Jan 30th
Letter &#034;U&#034; Solid Carbide Drill

Letter "U" Solid Carbide Drill

  • Fort Worth, Texas, United States
  • Jan 30th
Precision Twist Drill Carbide Letter &#034;R&#034;

Precision Twist Drill Carbide Letter "R"

  • Fort Worth, Texas, United States
  • Jan 30th
Atrax Carbide Drill 10 pcs. #25

Atrax Carbide Drill 10 pcs. #25

  • Fort Worth, Texas, United States
  • Jan 30th
#2 Morse Taper Shank Drill Bit Storage Rack, MT2 workshop wall mounting set #732

#2 Morse Taper Shank Drill Bit Storage Rack, MT2 workshop wall mounting set #732

  • Sheboygan Falls, Wisconsin, United States
  • Jan 30th
LOT OF 2 MORSE #1 TAPER SHANK 29/64 &#034; DRILL BIT 18&#034; long PTD USA Extra length

LOT OF 2 MORSE #1 TAPER SHANK 29/64 " DRILL BIT 18" long PTD USA Extra length

  • Batavia, Ohio, United States
  • Jan 30th
LOT OF 3 3/4&#034; PTD Drill bit #2 Morse Taper MADE IN USA

LOT OF 3 3/4" PTD Drill bit #2 Morse Taper MADE IN USA

  • Batavia, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies