+ Post new Ad
Used 90 Degree Angle Block Lot of 3 ~ 2 a Set/1 Stand Alone/All Surfaces Ground, US $290 – Picture 0
Used 90 Degree Angle Block Lot of 3 ~ 2 a Set/1 Stand Alone/All Surfaces Ground, US $290 – Picture 0

Used 90 Degree Angle Block Lot Of 3 ~ 2 A Set/1 Stand Alone/all Surfaces Ground

US $290

  • Twinsburg, Ohio, United States
  • Jul 17th
Open on mobile:
QR code
Used 90 Degree Angle Blocks - Lot of 4 as Shown Made 'In-House', Shop Made - In the U.S.A. - So none of them are marked. What is here... 1) There are 2 here. A set. There is a .648 diameter through hole in each one. Not all machined surfaces on these 2. Was not needed for their application. Can be modified of course. One of the side faces is not completely flat. Should be able to see it in the 5th photo. 2) There is 1 here that has all of its surfaces ground. It also has a grind relief on the inside corner for when they ground it. There is a .392 diameter through hole in this one. I cleaned them up some. Can use more cleaning. Or dusted to make them pretty if you grind. Shipping is estimated at 14 to 15 pounds These will fit in a large priority flat rate box if that helps Also Fedex may even be better to choose from NOTES: This lot comes with a 30 day warranty as described Local pick up is also a choice at no charge. Located in Twinsburg, Ohio. See photos at the top of this page for more details NO INTERNATIONAL SHIPPING!
“See description below...”
Shape 90 Degrees
MPN Does Not Apply
Modified Item No
Block Type Angle Block
Country/Region of Manufacture United States
Brand Unbranded
UPC Does not apply

Directions

Similar products from Supporting Blocks & Sets

4 Magnetic Parallels 2 pairs 1" x 2" x 4"

4 Magnetic Parallels 2 pairs 1" x 2" x 4"

  • Minneapolis, Minnesota, United States
  • Jul 17th
(1-2-3 Tin Coated Block Set, 3402-0905) - HHIP 3402-0905 1-2-3 Tin Coated

(1-2-3 Tin Coated Block Set, 3402-0905) - HHIP 3402-0905 1-2-3 Tin Coated

  • Brooklyn, NY, United States
  • Jul 17th
(1-2-3 Block Set, 3402-0005) - HHIP 3402-0005 1-2-3 Block Set, 23 Holes

(1-2-3 Block Set, 3402-0005) - HHIP 3402-0005 1-2-3 Block Set, 23 Holes

  • Brooklyn, NY, United States
  • Jul 17th
Vintage Enron 1-2-3 Blocks Configure In Many Ways Counterbored Holes

Vintage Enron 1-2-3 Blocks Configure In Many Ways Counterbored Holes

  • Seabrook, New Hampshire, United States
  • Jul 17th
Brown & Sharpe V-Block and Clamp No. 750-2 - Hardened Steel - Precision Ground

Brown & Sharpe V-Block and Clamp No. 750-2 - Hardened Steel - Precision Ground

  • Naperville, Illinois, United States
  • Jul 17th
Vintage Starret No 567 Machinist V Block

Vintage Starret No 567 Machinist V Block

  • Seabrook, New Hampshire, United States
  • Jul 17th
BROWN AND SHARPE 749-1 V - BLOCK SET WITH CLAMP

BROWN AND SHARPE 749-1 V - BLOCK SET WITH CLAMP

  • San Diego, California, United States
  • Jul 17th
5" SINE BAR 1" WIDTH 6" OVERALL LENGTH

5" SINE BAR 1" WIDTH 6" OVERALL LENGTH

  • Punta Gorda, Florida, United States
  • Jul 17th
machinist V block set

machinist V block set

  • Huntingdon Valley, Pennsylvania, United States
  • Jul 17th
MACHINIST MADE SET UP BLOCKS Tool & Die Maker Machinist Tool Maker Tool

MACHINIST MADE SET UP BLOCKS Tool & Die Maker Machinist Tool Maker Tool

  • Warrenton, Virginia, United States
  • Jul 17th
LINK CO-CH-201 #4 Se Cobalt Rh Radius Coolant Thru Centerdrill

LINK CO-CH-201 #4 Se Cobalt Rh Radius Coolant Thru Centerdrill

  • Buffalo Grove, Illinois, United States
  • Jul 16th
LINK 27-L2-687 #8 Hey HSS Rh Radius Centerdrill

LINK 27-L2-687 #8 Hey HSS Rh Radius Centerdrill

  • Buffalo Grove, Illinois, United States
  • Jul 16th
LINK CO-CH-203 #6 Se Cobalt Rh Radius Coolant Thru Centerdrill

LINK CO-CH-203 #6 Se Cobalt Rh Radius Coolant Thru Centerdrill

  • Buffalo Grove, Illinois, United States
  • Jul 16th
LINK CO-CH-204 #7 Se Cobalt Rh Radius Coolant Thru Centerdrill

LINK CO-CH-204 #7 Se Cobalt Rh Radius Coolant Thru Centerdrill

  • Buffalo Grove, Illinois, United States
  • Jul 16th
Lot Of Machinists Toolmaking Lathe Mill Set Up Blocks 7 Total

Lot Of Machinists Toolmaking Lathe Mill Set Up Blocks 7 Total

  • Kenton, Ohio, United States
  • Jul 16th
LINK CO-TN-686 #7 Hey Cobalt Rh Radius Tin Coat Centerdrill

LINK CO-TN-686 #7 Hey Cobalt Rh Radius Tin Coat Centerdrill

  • Buffalo Grove, Illinois, United States
  • Jul 16th
SPI V-Block 4 PIECE SET - 91-305-3; Two 1 1/2" and Two 2" with Clamps

SPI V-Block 4 PIECE SET - 91-305-3; Two 1 1/2" and Two 2" with Clamps

  • Clarksville, Tennessee, United States
  • Jul 16th
Vintage Magnetic Chuck V Block Brass & Steel

Vintage Magnetic Chuck V Block Brass & Steel

  • Seabrook, New Hampshire, United States
  • Jul 16th
Vintage Magnetic Chuck Set Up Block Brass & Steel

Vintage Magnetic Chuck Set Up Block Brass & Steel

  • Seabrook, New Hampshire, United States
  • Jul 16th
Vintage Magnetic Chuck Set Up Blocks Steel Brass And Copper

Vintage Magnetic Chuck Set Up Blocks Steel Brass And Copper

  • Seabrook, New Hampshire, United States
  • Jul 16th

People who viewed this item also vieved

FPG CM4 Live Center MT4

FPG CM4 Live Center MT4

  • Spring Valley, California, United States
  • Jan 30th
3/4" Machinist Lathe Tool:Lathe Dog -Atlas/Craftsman/South Bend

3/4" Machinist Lathe Tool:Lathe Dog -Atlas/Craftsman/South Bend

  • Ossian, Indiana, United States
  • Jan 30th
2, OLDER LIVE BEARINGS CENTERS FOR WOOD METAL LATHE

2, OLDER LIVE BEARINGS CENTERS FOR WOOD METAL LATHE

  • Waterford, Michigan, United States
  • Jan 30th
8" HOWA / HITACHI SEIKI HA6-8-46 CNC HYDRAULIC POWER LATHE CHUCK A2-6 MOUNT

8" HOWA / HITACHI SEIKI HA6-8-46 CNC HYDRAULIC POWER LATHE CHUCK A2-6 MOUNT

  • Cleveland, Ohio, United States
  • Jan 30th
ER 32 Collet Chuck Smith Tool 1-1/16" Dia Acme Threaded Shank (my-ID-1B2)

ER 32 Collet Chuck Smith Tool 1-1/16" Dia Acme Threaded Shank (my-ID-1B2)

  • Hendersonville, Tennessee, United States
  • Jan 30th
Chandox 8" , 1.5P Soft Chuck Jaws

Chandox 8" , 1.5P Soft Chuck Jaws

  • Abingdon, Maryland, United States
  • Jan 30th
34 Pc Used Step Block & Fixturing Clamp Set, 7/16"-13 T-Bolt Hold Down Kit

34 Pc Used Step Block & Fixturing Clamp Set, 7/16"-13 T-Bolt Hold Down Kit

  • New Haven, Michigan, United States
  • Jan 30th
DE-STA-CO 5310, 90 degree Horizontal Toggle Clamp

DE-STA-CO 5310, 90 degree Horizontal Toggle Clamp

  • Chillicothe, Missouri, United States
  • Jan 30th
Royal USA Deburring Tool Zip Multi / Burr Set 22022

Royal USA Deburring Tool Zip Multi / Burr Set 22022

  • Columbus, Ohio, United States
  • Jan 30th
Royal Pullback CNC Lathe 5C Collet Chuck Spindle A2-5 42053 Haas Fadal Samsung

Royal Pullback CNC Lathe 5C Collet Chuck Spindle A2-5 42053 Haas Fadal Samsung

  • Carrollton, Ohio, United States
  • Jan 30th
1/2" STRAIGHT SHANK ER16 COLLET HOLDER W/COLLETS Y158

1/2" STRAIGHT SHANK ER16 COLLET HOLDER W/COLLETS Y158

  • Montville, Ohio, United States
  • Jan 30th
KEARNEY & TRECKER TG 100 COLLET CHUCK 10" OAL (LOC1181A)

KEARNEY & TRECKER TG 100 COLLET CHUCK 10" OAL (LOC1181A)

  • Laingsburg, Michigan, United States
  • Jan 30th
Hardinge 9/32 4NS Collet

Hardinge 9/32 4NS Collet

  • Bowling Green, Kentucky, United States
  • Jan 30th
TMS Smith Tool 51-008 Tap Adapter Collet 1/2 Inch Taps with 3/8" Shank

TMS Smith Tool 51-008 Tap Adapter Collet 1/2 Inch Taps with 3/8" Shank

  • Blue Springs, Missouri, United States
  • Jan 30th
HARDINGE STYLE 3H COLLET 9/16" DIAMETER - USED - GOOD CONDITION

HARDINGE STYLE 3H COLLET 9/16" DIAMETER - USED - GOOD CONDITION

  • Isanti, Minnesota, United States
  • Jan 30th
Jones & Lamson comparator stage fixture & 2 pcs. V-blocks

Jones & Lamson comparator stage fixture & 2 pcs. V-blocks

  • Addison, Illinois, United States
  • Jan 30th
Mead Fluid Dynamics - Air Powered cross slide 3" Travel - Jig or Fixture

Mead Fluid Dynamics - Air Powered cross slide 3" Travel - Jig or Fixture

  • Milton Freewater, Oregon, United States
  • Jan 30th
WELDED ANGLE / FIXTURE PLATE 13 X 14 X 18 X 1" PLATE USED

WELDED ANGLE / FIXTURE PLATE 13 X 14 X 18 X 1" PLATE USED

  • Piqua, Ohio, United States
  • Jan 30th
Atlas # 9-88 MT # 2 Dead Center / OO 201

Atlas # 9-88 MT # 2 Dead Center / OO 201

  • Seffner, Florida, United States
  • Jan 30th
Atlas # 9-101-64A Change Gear -64 Tooth / OO 194

Atlas # 9-101-64A Change Gear -64 Tooth / OO 194

  • Seffner, Florida, United States
  • Jan 30th
Atlas/Craftsman # 9-101-64A Change Gear - 64 Tooth / OO 193

Atlas/Craftsman # 9-101-64A Change Gear - 64 Tooth / OO 193

  • Seffner, Florida, United States
  • Jan 30th
Adjustable Tailstock For 4-6 Inch Rotary Tables

Adjustable Tailstock For 4-6 Inch Rotary Tables

  • Chino, California, United States
  • Jan 30th
Heavy Duty Tailstock adjustable for Rotary table Dividing head

Heavy Duty Tailstock adjustable for Rotary table Dividing head

  • Houston, Texas, United States
  • Jan 30th
OKUMA 7000 4TH AXIS CNC ROTARY TABLE NCR-240 WITH HOWA CHUCK 7003 H0921M8 S-884

OKUMA 7000 4TH AXIS CNC ROTARY TABLE NCR-240 WITH HOWA CHUCK 7003 H0921M8 S-884

  • Warren, Michigan, United States
  • Jan 30th
Pipe Vise, Vintage Littletown Hardware & Foundry Co. #52 Pipe Vise Made in USA

Pipe Vise, Vintage Littletown Hardware & Foundry Co. #52 Pipe Vise Made in USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
ridgid pipe clamp no 2

ridgid pipe clamp no 2

  • Churchill, Ontario, Canada
  • Jan 30th
4" TOOL MAKERS VISE

4" TOOL MAKERS VISE

  • Wadley, Alabama, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies