+ Post new Ad
USED: AEC Whitlock dryer, model 150CL. 3/60/460 volt, 150 cfm process air flow,, US $6000 – Picture 0
USED: AEC Whitlock dryer, model 150CL. 3/60/460 volt, 150 cfm process air flow,, US $6000 – Picture 0

Used: Aec Whitlock Dryer, Model 150cl. 3/60/460 Volt, 150 Cfm Process Air Flow,

US $6000

  • Bensenville, Illinois, United States
  • Jun 2nd
Open on mobile:
QR code
USED: AEC Whitlock dryer, model 150CL. 3/60/460 volt, 150 cfm process air flow, Click To Enlarge USED: AEC Whitlock dryer, model 150CL. 3/60/460 volt, 150 cfm process air flow, approximate 4 hp blower. Mounted on casters. OAD 37" long x 37" wide x 79" tall. Approximate weight 750#. ref #: 80336 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

USED: Reifenhauser cooling unit for cast film. (1) 12" diameter x 32" straight s

USED: Reifenhauser cooling unit for cast film. (1) 12" diameter x 32" straight s

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Prodex Henschel High Intensity Mixer, Model 2JSS, .25 Cubic Feet (7 Liter)

Used- Prodex Henschel High Intensity Mixer, Model 2JSS, .25 Cubic Feet (7 Liter)

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- HPM 3.5" Single Screw Extruder. 3.5" diameter x 138" long cored screw, 40:

Used- HPM 3.5" Single Screw Extruder. 3.5" diameter x 138" long cored screw, 40:

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Gearbox, Type SSH 225/4, 1490 Input. Previously used between motor and gea

Used- Gearbox, Type SSH 225/4, 1490 Input. Previously used between motor and gea

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Belt Puller, 8" wide x 38" contact area. Manually adjustable rubber belts,

Used- Belt Puller, 8" wide x 38" contact area. Manually adjustable rubber belts,

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Neumeg Fiber Spinning Machine, Model RK1. Approximate 2000 meters per minu

Used- Neumeg Fiber Spinning Machine, Model RK1. Approximate 2000 meters per minu

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Extrusion Dies Inc Ultraflex 40 sheet die, 29" wide. Coat hanger design, 1

Used- Extrusion Dies Inc Ultraflex 40 sheet die, 29" wide. Coat hanger design, 1

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Berstorff 75mm Twin Screw Extruder, Model ZE75A. 16:1 L/D, 4 zone electric

Used- Berstorff 75mm Twin Screw Extruder, Model ZE75A. 16:1 L/D, 4 zone electric

  • Bensenville, Illinois, United States
  • Jun 2nd
USED- Novatec POD Series Drying System, Model POD-150B. Dual tank system driven

USED- Novatec POD Series Drying System, Model POD-150B. Dual tank system driven

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: Novatec POD series drying system, model POD-150B. Dual tank system driven

USED: Novatec POD series drying system, model POD-150B. Dual tank system driven

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: AEC Whitlock WD series cabinet dryer, model WD150Q. 3/60/460 volt, 150 cfm

USED: AEC Whitlock WD series cabinet dryer, model WD150Q. 3/60/460 volt, 150 cfm

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Lodige Cooler, Model 1210, 42 Cubic Feet Working Capacity, 321 Stainless S

Used- Lodige Cooler, Model 1210, 42 Cubic Feet Working Capacity, 321 Stainless S

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: American Maplan approximate 40mm counter-rotating, intermeshing twin screw

USED: American Maplan approximate 40mm counter-rotating, intermeshing twin screw

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: Sakas table saw, model TS110. (3) upacting saws, approximate 10" diameter

USED: Sakas table saw, model TS110. (3) upacting saws, approximate 10" diameter

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: Progressive Systems dual rip saw. Approximate 10' wide area, (2) 14" diame

USED: Progressive Systems dual rip saw. Approximate 10' wide area, (2) 14" diame

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: Grinder, approximately 14" diameter x 18" wide 3 bolt-on slanted blade ope

USED: Grinder, approximately 14" diameter x 18" wide 3 bolt-on slanted blade ope

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Ball and Jewel Granulator, model CG-812-SCSX. Approximate 8" diameter x 12

Used- Ball and Jewel Granulator, model CG-812-SCSX. Approximate 8" diameter x 12

  • Bensenville, Illinois, United States
  • Jun 2nd
USED: Boston Matthews Belt Puller, model C650VT. (2) Manually adjustable belts,

USED: Boston Matthews Belt Puller, model C650VT. (2) Manually adjustable belts,

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Labotek Desiccant Flexible Dryer, Model DCD3000. Approximately 1500 cubic

Used- Labotek Desiccant Flexible Dryer, Model DCD3000. Approximately 1500 cubic

  • Bensenville, Illinois, United States
  • Jun 2nd
Used- Automated Assemblies Corp. Robot Arm, Model AX-40 W/E4. Last used picking

Used- Automated Assemblies Corp. Robot Arm, Model AX-40 W/E4. Last used picking

  • Bensenville, Illinois, United States
  • Jun 2nd

People who viewed this item also vieved

AUTOJECTOR Vetical Injection Molding Machine

AUTOJECTOR Vetical Injection Molding Machine

  • Gibsonville, North Carolina, United States
  • Jan 30th
18" X 18" Vacuum Former/Forming - Thermoform Plastic Forming Box/Machine/Table

18" X 18" Vacuum Former/Forming - Thermoform Plastic Forming Box/Machine/Table

  • Miami, Florida, United States
  • Jan 30th
Daedal Former 18x14 Vacuum Former

Daedal Former 18x14 Vacuum Former

  • Kyle, Texas, United States
  • Jan 30th
390 ton Toshiba ISGS390 Injection Molding Machine

390 ton Toshiba ISGS390 Injection Molding Machine

  • United States
  • Jan 30th
Toshiba injection molding machine controls

Toshiba injection molding machine controls

  • Waseca, Minnesota, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies