+ Post new Ad
USED BEAVER QUICK CHANGE BORING BAR HOLDER with 2.00" Shank for 3/8" TOOL BITS, US $64.95 – Picture 0
USED BEAVER QUICK CHANGE BORING BAR HOLDER with 2.00" Shank for 3/8" TOOL BITS, US $64.95 – Picture 0

Used Beaver Quick Change Boring Bar Holder With 2.00" Shank For 3/8" Tool Bits

US $64.95

  • Fairfield, Iowa, United States
  • May 8th
Open on mobile:
QR code
Looking for a used Beaver quick change boring bar holder with a 2.00" shank for 3/8" tool bits? Look no further! This listing is for a used Beaver quick change boring bar tool bit holder, part number 20XE1-12 3/8T. The shank is 2.00" long, while the overall length (OAL) is 16.00". This holder is suitable for use with 3/8" tool bits (not included), and has an angle of 90 degrees. Despite being used, the holder is in good condition, although note that the shank has been modified and ground on. Finally, please note that as the purchaser, you assume all risk of liability with respect to the eBay purchase and use of the item. We reserve the right to end any listing at any time and update or change our policies without notice. If you're interested in purchasing, please carefully review our policies below. Buyers are responsible for all shipping and handling charges, however we do offer combined shipping. In addition, if you're located near our ATI Tooling facility in Fairfield, IA, you're welcome to pick up your items in person (by appointment only). We accept a variety of payment options, including PayPal, Visa, Mastercard, American Express, and Discover. If you prefer to pay by phone, please call our number at 800-535-8331. Note that all Iowa customers are subject to Iowa state sales tax of 7%. Our goal is to earn 5-star ratings in all categories, and if we do make a mistake, we're committed to fixing it. Please don't leave negative or neutral feedback until you give us a chance to make things right.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Good used. Shank was modified and ground on.”

Directions

Similar products from Adapters & Arbor Tool Holders

TTC 81226 1/8" Collet Adapter

TTC 81226 1/8" Collet Adapter

  • Duncan, South Carolina, United States
  • May 15th
S-J MORSE TAPER ADAPTER SOCKET 1MT x 5MT

S-J MORSE TAPER ADAPTER SOCKET 1MT x 5MT

  • Cleveland, Ohio, United States
  • May 15th
Sandvik 40MM-VF-12541

Sandvik 40MM-VF-12541

  • Phoenix, Arizona, United States
  • May 14th
2-1/2" OD SHANK NO.5 MORSE TAPER ADAPTER SLEEVE #5MT

2-1/2" OD SHANK NO.5 MORSE TAPER ADAPTER SLEEVE #5MT

  • Cleveland, Ohio, United States
  • May 13th
Toolmex 7-115-005 Milling Machine Adapter, R8 to MT2 | (29B)

Toolmex 7-115-005 Milling Machine Adapter, R8 to MT2 | (29B)

  • Saint Louis, Missouri, United States
  • May 11th
(#4747C) Used USA Made No.3 to No.4 Morse Taper Drill Sleeve or Adaptor

(#4747C) Used USA Made No.3 to No.4 Morse Taper Drill Sleeve or Adaptor

  • Warren, Michigan, United States
  • May 10th
Jacobs JT3 to 3/4" Straight Arbor, NOS

Jacobs JT3 to 3/4" Straight Arbor, NOS

  • Hopkinsville, Kentucky, United States
  • May 10th
DAKE NO. 001 ARBOR PRESS 1 TON HAND PRESS BENCH PRESS USED

DAKE NO. 001 ARBOR PRESS 1 TON HAND PRESS BENCH PRESS USED

  • Longmeadow, Massachusetts, United States
  • May 10th
Positive Drive Tap Adapter, CWE1 Centaur p/n 105062

Positive Drive Tap Adapter, CWE1 Centaur p/n 105062

  • Rockledge, Florida, United States
  • May 9th
4MT to 5MT adapter sleeve; 5 Morse taper to 4 Morse taper R#0244

4MT to 5MT adapter sleeve; 5 Morse taper to 4 Morse taper R#0244

  • Dayton, Ohio, United States
  • May 8th
Lathes MT2 to MT1 Morse Slope Taper Arbors Adapters Reducing Drill Sleeve

Lathes MT2 to MT1 Morse Slope Taper Arbors Adapters Reducing Drill Sleeve

  • HK, Hong Kong
  • May 8th
BEAVER TOOL NMTB 50 2" MILLING MACHINE ARBOR B STYLE STK 2889

BEAVER TOOL NMTB 50 2" MILLING MACHINE ARBOR B STYLE STK 2889

  • Wadley, Alabama, United States
  • May 7th
Shell End Mill Arbor Screw - Thread Size: 3/4"-16 ARBOR DIAMETER: 1-7/8"

Shell End Mill Arbor Screw - Thread Size: 3/4"-16 ARBOR DIAMETER: 1-7/8"

  • Columbia Falls, Montana, United States
  • May 6th
HEAVILY USED COLLIS MORSE TAPER ADAPTER #4MT Socket x #5MT Shank SLEEVE

HEAVILY USED COLLIS MORSE TAPER ADAPTER #4MT Socket x #5MT Shank SLEEVE

  • Fairfield, Iowa, United States
  • May 6th
BILZ SIZE #1 TORQUE CONTROL ADAPTER COLLET FOR 5/16" TAP

BILZ SIZE #1 TORQUE CONTROL ADAPTER COLLET FOR 5/16" TAP

  • Cleveland, Ohio, United States
  • May 5th
BILZ SIZE #1 TORQUE CONTROL ADAPTER COLLET FOR 3/8" TAP

BILZ SIZE #1 TORQUE CONTROL ADAPTER COLLET FOR 3/8" TAP

  • Cleveland, Ohio, United States
  • May 5th
Jacobs chuck arbor MT/JT shank to 33 JT A0233 machine shop morse taper #2

Jacobs chuck arbor MT/JT shank to 33 JT A0233 machine shop morse taper #2

  • Pompano Beach, Florida, United States
  • May 4th
COLLIS TAPERED SHANK ADAPTER EXTENSION 3 MALE TO 4 MT FEMALE

COLLIS TAPERED SHANK ADAPTER EXTENSION 3 MALE TO 4 MT FEMALE

  • Baldwinville, Massachusetts, United States
  • May 4th
Vintage DRILL CHUCK ARBOR , 5/8" STRAIGHT TO NO. 1 JT.

Vintage DRILL CHUCK ARBOR , 5/8" STRAIGHT TO NO. 1 JT.

  • Fort Worth, Texas, United States
  • May 3rd
TECHNIKS CAT40 FACE MILL ADAPTER 1" CAT40 X FMA1"-2.06" STK2722

TECHNIKS CAT40 FACE MILL ADAPTER 1" CAT40 X FMA1"-2.06" STK2722

  • Wadley, Alabama, United States
  • May 2nd

People who viewed this item also vieved

CORMAN / RMC TOOLING, MCRNL 20-4D INDEXABLE TOOL HOLDER

CORMAN / RMC TOOLING, MCRNL 20-4D INDEXABLE TOOL HOLDER

  • New Castle, Pennsylvania, United States
  • Jan 30th
Sandvik L166.0KF-16-1220-11B Thread Tool Holder T-Max U-Lock Boring Bar

Sandvik L166.0KF-16-1220-11B Thread Tool Holder T-Max U-Lock Boring Bar

  • Boca Raton, Florida, United States
  • Jan 30th
**NEW** Collis Rapid Switch RS200 End Mill Holder Adapter .750

**NEW** Collis Rapid Switch RS200 End Mill Holder Adapter .750

  • Cedar Hill, Texas, United States
  • Jan 30th
**NEW** Collis Rapid Switch RS200 End Mill Holder Adapter .500

**NEW** Collis Rapid Switch RS200 End Mill Holder Adapter .500

  • Cedar Hill, Texas, United States
  • Jan 30th
Browning Q1 1-3/8 Split Taper Bushing 5/16 x 3/16" Keyway No Hardware NWOB

Browning Q1 1-3/8 Split Taper Bushing 5/16 x 3/16" Keyway No Hardware NWOB

  • Rochester, New York, United States
  • Jan 30th
Qty 15 - Oilite Flange Bushing Bronze 1/2" id x 5/8" od x 3/4" long Free Ship

Qty 15 - Oilite Flange Bushing Bronze 1/2" id x 5/8" od x 3/4" long Free Ship

  • Alexandria, Minnesota, United States
  • Jan 30th
KENNAMETAL ERICKSON CAT 50 BORING HOLDER FOR TENTH SET CV50TB350921 LOT C8153

KENNAMETAL ERICKSON CAT 50 BORING HOLDER FOR TENTH SET CV50TB350921 LOT C8153

  • Dayton, Ohio, United States
  • Jan 30th
KENNAMETAL ERICKSON CAT 50 BORING HOLDER FOR TENTH SET CV50TB300962 LOT C8147

KENNAMETAL ERICKSON CAT 50 BORING HOLDER FOR TENTH SET CV50TB300962 LOT C8147

  • Dayton, Ohio, United States
  • Jan 30th
Used Lathe Tool Holder 1" Valenite SD-TMUR-16-4D Carbide Insert USA

Used Lathe Tool Holder 1" Valenite SD-TMUR-16-4D Carbide Insert USA

  • Elkin, North Carolina, United States
  • Jan 30th
Sandvik Coromant Carbide Mill Insert, SEKR 12 04 AZWM 4240, Pack of 10

Sandvik Coromant Carbide Mill Insert, SEKR 12 04 AZWM 4240, Pack of 10

  • Glendale, Arizona, United States
  • Jan 30th
SANDVIK PTFNR 3232P 22 CARBIDE INSERT CERAMIC TOOL HOLDER

SANDVIK PTFNR 3232P 22 CARBIDE INSERT CERAMIC TOOL HOLDER

  • Boiling Springs, South Carolina, United States
  • Jan 30th
NL-46 LOCK PINS QUANTITY OF 10 PIECES

NL-46 LOCK PINS QUANTITY OF 10 PIECES

  • West Chicago, Illinois, United States
  • Jan 30th
Cooper Tools, Apex CR-514 7/16"X1/2" Quick Release Chuck Hex Shank Bit (A3019)67

Cooper Tools, Apex CR-514 7/16"X1/2" Quick Release Chuck Hex Shank Bit (A3019)67

  • Huntington Beach, California, United States
  • Feb 13th
1 pc Keyless 1/32-3/8" Cap Drill Chuck with Conversion 1/4" Hex Adapter

1 pc Keyless 1/32-3/8" Cap Drill Chuck with Conversion 1/4" Hex Adapter

  • McHenry, Illinois, United States
  • Feb 13th
KDK-152 TYPE THREADING & FACING BAR HOLDER (3900-5452)

KDK-152 TYPE THREADING & FACING BAR HOLDER (3900-5452)

  • Chino, California, United States
  • Feb 24th
PARTING BAR HOLDER KDK-154 TYPE (3900-5454)

PARTING BAR HOLDER KDK-154 TYPE (3900-5454)

  • Chino, California, United States
  • Feb 24th
Tecnara MST Corporation Milling 45 Angle Head 262-6 6000RPM ER16 Rotating Tool

Tecnara MST Corporation Milling 45 Angle Head 262-6 6000RPM ER16 Rotating Tool

  • Windsor, Connecticut, United States
  • May 11th
MILL SPINDLE DRAWBAR GRIPPERS CNC VMC 50 TAPER REUCED PRICE!!!!- show original title

MILL SPINDLE DRAWBAR GRIPPERS CNC VMC 50 TAPER REUCED PRICE!!!!- show original title

  • Saint Cloud, Minnesota, United States
  • May 12th
Sunnen Mandrel 2G-P28-1062VA

Sunnen Mandrel 2G-P28-1062VA

  • Bristol, Pennsylvania, United States
  • May 27th
K8-285AS SUNNEN HONE MANDREL WITH ADAPTER .285" - .290" RANGE

K8-285AS SUNNEN HONE MANDREL WITH ADAPTER .285" - .290" RANGE

  • Cleveland, Ohio, United States
  • May 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies