+ Post new Ad
Used- Berstoff 25mm Twin Screw Extruder, Model ZE25. Co-rotating side by side sc, US $7700 – Picture 0
Used- Berstoff 25mm Twin Screw Extruder, Model ZE25. Co-rotating side by side sc, US $7700 – Picture 0

Used- Berstoff 25mm Twin Screw Extruder, Model Ze25. Co-rotating Side By Side Sc

US $7700

  • Bensenville, Illinois, United States
  • Jun 8th
Open on mobile:
QR code
Used- Berstoff 25mm Twin Screw Extruder, Model ZE25. Co-rotating side by side sc Click To Enlarge Used- Berstoff 25mm Twin Screw Extruder, Model ZE25. Co-rotating side by side screw design. Approximately 28 to 1 L/D ratio. 6 Barrel sections, electrically heated, air cooled, 1 feed section. Approximate 48" center line height. Driven by 7.5 hp (5.5 kW), 3/87/380 volt, 2550 rpm motor thru gearbox. Includes control panel with Omron variable speed drive. Mounted on carbon steel frame.MFg 1985. ref #: 45968001 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

Used- Sterling 2.5" Single Screw Extruder. 24 to 1 L/D Ratio. Electrically heate

Used- Sterling 2.5" Single Screw Extruder. 24 to 1 L/D Ratio. Electrically heate

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Papenmeier High Intensity Mixer, Model TGHK8, 8 Liter Capacity. 316 Stainl

Used- Papenmeier High Intensity Mixer, Model TGHK8, 8 Liter Capacity. 316 Stainl

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Appleton Manufacturing Semi-Automatic Core Cutter, Model S 10 10 A. 6" Dia

Used- Appleton Manufacturing Semi-Automatic Core Cutter, Model S 10 10 A. 6" Dia

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Conair Puller, Model 6-39. (2) 6" Wide x 39" long manually adjustable belt

Used- Conair Puller, Model 6-39. (2) 6" Wide x 39" long manually adjustable belt

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Cumberland Grinder, Model 285, Carbon Steel. Approximately 10" x 12" feed

Used- Cumberland Grinder, Model 285, Carbon Steel. Approximately 10" x 12" feed

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Henschel High Intensity Mixer, Type FM 150, 150 Liter, 316 stainless steel

Used- Henschel High Intensity Mixer, Type FM 150, 150 Liter, 316 stainless steel

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Cincinnati Milacron Model CMS60-28GR Single Screw Extruder, 60mm. 28:1 L/D

Used- Cincinnati Milacron Model CMS60-28GR Single Screw Extruder, 60mm. 28:1 L/D

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Conair Vacuum Loading System Consisting Of: (1) Gardner Denver 5MQ Positiv

Used- Conair Vacuum Loading System Consisting Of: (1) Gardner Denver 5MQ Positiv

  • Bensenville, Illinois, United States
  • Jun 8th
Used- AEC (4) Component Colorblend Dosing Feeder, Model Synchrobln. (4) Rotating

Used- AEC (4) Component Colorblend Dosing Feeder, Model Synchrobln. (4) Rotating

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Conair PD5 Vacuum Loading System, Serial# 75631. Consisting Of: (1) Roots

Used- Conair PD5 Vacuum Loading System, Serial# 75631. Consisting Of: (1) Roots

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Henschel High Intensive Mixer, Model FM40D, 40 Liter (1.4 cubic feet) Capa

Used- Henschel High Intensive Mixer, Model FM40D, 40 Liter (1.4 cubic feet) Capa

  • Bensenville, Illinois, United States
  • Jun 8th
Used- C.A. Picard International Flexible Dismantling System, Model CAP/FD 005. D

Used- C.A. Picard International Flexible Dismantling System, Model CAP/FD 005. D

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Diosna High Intensive Mixer, Type R25, 304 Stainless Steel. 25 Liter (0.88

Used- Diosna High Intensive Mixer, Type R25, 304 Stainless Steel. 25 Liter (0.88

  • Bensenville, Illinois, United States
  • Jun 8th
Used- 78" Wide Roller Sheet Die. Last used on 10" dump extruder. Unit prior use

Used- 78" Wide Roller Sheet Die. Last used on 10" dump extruder. Unit prior use

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Beringer Underwater Pelletizer system consisting of: (1) Pelletizing head,

Used- Beringer Underwater Pelletizer system consisting of: (1) Pelletizing head,

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Conair Jetro Pelletizer, Model 208. Approximate 8" wide x 6" diameter 48 b

Used- Conair Jetro Pelletizer, Model 208. Approximate 8" wide x 6" diameter 48 b

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Colortronic 6 Component Gravimetric Slide Gate Blender, Model CSG-900-6R.

Used- Colortronic 6 Component Gravimetric Slide Gate Blender, Model CSG-900-6R.

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Killion 1-1/2" Single Screw Extruder, Model KN-150. Approximately 24 to 1

Used- Killion 1-1/2" Single Screw Extruder, Model KN-150. Approximately 24 to 1

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Prodex High Intensity Mixer, Model 60JSS, 304 Stainless Steel. Approximate

Used- Prodex High Intensity Mixer, Model 60JSS, 304 Stainless Steel. Approximate

  • Bensenville, Illinois, United States
  • Jun 8th
Used- Cincinnati Milacron Crammer Feeder. Approximately 5" diameter 304 stainles

Used- Cincinnati Milacron Crammer Feeder. Approximately 5" diameter 304 stainles

  • Bensenville, Illinois, United States
  • Jun 8th

People who viewed this item also vieved

Omega M-6903 Band Heater 600W 230V 5" Inner Diameter 1-1/2" Height

Omega M-6903 Band Heater 600W 230V 5" Inner Diameter 1-1/2" Height

  • Wilmington, Ohio, United States
  • Jan 30th
Maco 8000 Memory Cartridge (24K)

Maco 8000 Memory Cartridge (24K)

  • Roselle, Illinois, United States
  • Jan 30th
LINDBERG HEATING ELEMENT AMONIA DIS 5000W 230V P/N: 8273-75981-5

LINDBERG HEATING ELEMENT AMONIA DIS 5000W 230V P/N: 8273-75981-5

  • Fort Worth, Texas, United States
  • Jan 30th
Garlock Seal 21238-4083 40830064 12.5 x 14.5 x .812 64X40B3 64X4083

Garlock Seal 21238-4083 40830064 12.5 x 14.5 x .812 64X40B3 64X4083

  • Rhoadesville, Virginia, United States
  • Jan 30th
Netstal Discjet 600 take-out arm with NSK Y2020GN001

Netstal Discjet 600 take-out arm with NSK Y2020GN001

  • Fitchburg, Massachusetts, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies