US $150.00
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “I see a few drilled holes, dings and porosity. Pictures will show the defects.” |
Directions
Similar products from Supporting Blocks & Sets
Travers Tool Comp.3" 3 Inch Vee-Block set (V-Block Set) VEB-3 FREE SHIPPING
Montgomery Tools Tietzmann #1 Ball Bearing Parallel Set of 4
NOS MATCHING SET IN CASE VEE BLOCK SET HARDENED+GROUND 1 3/8 X 1 3/8 X 1 1/8
LS Starrett Machinist Drill Blocks, 1 Set and Clamp - No. 271 C - Vintage
New Starrett No.384G One Pair 3/8"x 1/2"x 6" Steel Parallels ToolmakersMachinist
Magnetic Transfer V-Block BRASS w/ STEEL Pins 2 V's Toolmaker FREE SHIPPING
1.1/2" CAPACITY PRECISION STEEL V-BLOCK PAIR W. CLAMPS 1-1/4x1-1/4x1-5/8 - VEE
MAGNETIC V BLOCK - VEE BLOCK 4" x 3" x 3.3/4" 90 Deg. V-Angle - HARDENED
Angle Block Set 1 Degree to 25 Degree |LH4|
Used Brown and Sharpe V-Block 750 B Workholding Machinist Tools
GREAT! PAIR OF BROWN & SHARPE NO. 750-B PRECISION V-BLOCKS / FIXTURES W/ CLAMPS
GREAT! PAIR OF A.F. NEUMANN PRECISION V-BLOCKS / FIXTURES
MATCHED PAIR!! STARRETT NO. 271 V-BLOCKS + CLAMP - 3/8" & 13/16 CAPACITY
VINTAGE STARRETT NO. 54 5" LONG MACHINIST HOLD DOWNS TOOLING
NEW APV 340723 1-5/8X5/16IN STEEL THRUST BLOCK ASSEMBLY B274567
2.250"x2.625"x3.250" V Block Toolmakers Dream
25 Piece Machinist Raduis Gages with case. Made by Mitutoyo.
STARRETT V-BLOCK No.568 & CLAMP, MACHINIST TOOLS CLEAN VGC
Misc. Lot of Machinist Toolmaker Blocks Parallel Work Holding angle block
2 SMALL MEASURING BLOCKS, 2 SMALL ANGLE BLOCKS AND 2 SMALL SCRIBES
People who viewed this item also vieved
RITEN 14605 5MT CNC HIGH RPM SPRINT LIVE CENTER
RITEN 14102 2MT LONG PT.CNC HIGH RPM SPRINT LIVE CENTR
RITEN 14604 4MT CNC HIGH RPM SPRINT LIVE CENTER
Angle Plate; Taft-Peirce (CTAM 9613)
Angle Plate; Taft-Peirce (CTAM 9612)
Angle Plate; 12x4x5 (CTAM 9601)
ROYAL 5C TOOL 17 PC COLLET SET 1/16" TO 1 1/16"
Hardinge 5C collets 6 Pcs 11/64-57/64" various sizes
Set of 2 Techniks High Precision ER25 Spring Collets HCS 1/2"
Good Hand GH-20235 750lbs holding toggle clamp red handle
Vintage Petersen Vise-Grip Pliers Lot - 5WR (3) and 7R (2)
Ridge Tool Company Bench Mount Pipe Vise Marked 2 1/2 with Metal Mounting Arm.
Used Ridgid Model 4000R 4 inch Bench Vise Made in USA
4" Lathe Chuck, 3-Jaw with adapter Self Centering Lathe Upgrade Harbor Freight
ER 25 Collet Extension 7.5" Overall Length 25mm Shank ST 25x145 ER25 MFE (LOC70)
Valenite DA 180 7.25" Collet Extension 1.25" Shank VE 1250 (LOC70)
Parlec DA 100 12" Collet Extension 1" Shank (LOC70)
Haas HRT310SP 12.2" CNC Servo Rotary Table with Wraparound Motor with Controller
NEWS 8" Horizontal/Vertical Super Spacer 3-jaw Chuck
SMW RT-160 5C CNC Rotary Table 4th Axis Indexer 6.25" Face Plate
++ KURT MILLING VICE HANDLE 11.5" LONG 3/4" INNER DIAMETER 080-23A (BB)
++ KURT MILLING VICE HANDLE 10" LONG 1" INNER DIAMETER (AA)
7pc FAIRLANE ROUND CARBIDE TIPPED GRIPPER 1/2" DIA 1/2" TALL #10-32 THRD 4-Point
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies