+ Post new Ad
Used- Cincinnati Milacron 35mm Conical Counter-Rotating Twin Screw Extruder, Mod, US $7400 – Picture 0
Used- Cincinnati Milacron 35mm Conical Counter-Rotating Twin Screw Extruder, Mod, US $7400 – Picture 0

Used- Cincinnati Milacron 35mm Conical Counter-rotating Twin Screw Extruder, Mod

US $7400

  • Bensenville, Illinois, United States
  • Jun 12th
Open on mobile:
QR code
Used- Cincinnati Milacron 35mm Conical Counter-Rotating Twin Screw Extruder, Mod Click To Enlarge Used- Cincinnati Milacron 35mm Conical Counter-Rotating Twin Screw Extruder, Model CM35. Approximate 24 to 1 L/D ratio. Electrically heated, liquid cooled 3 zone vented barrel. Water cooled feed throat with hopper. Approximately 40" centerline height. Driven by a 12.7 hp, 640 volt, 1600/1750 rpm DC motor thru a Koellman reducer, ratio 31.39 to 1. Includes a control panel with a Cincinnati Milacron touch screen panel, model 3-424-2065A, and a Powertec 1000A drive. Serial #E50A0298006, built 1998. ref #: 44786001 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

MK8 Drive Gear 1.75mm Filament 3D Printer Extruder Reprap Prusa I3 Makerbot Gear

MK8 Drive Gear 1.75mm Filament 3D Printer Extruder Reprap Prusa I3 Makerbot Gear

  • CN, China
  • Jun 12th
ZCORP VISIJET PXL ZB63 ALTERNATIVE GRAPHINK™ BINDER 3 COLOR KIT PROJET ZPRINTER

ZCORP VISIJET PXL ZB63 ALTERNATIVE GRAPHINK™ BINDER 3 COLOR KIT PROJET ZPRINTER

  • Las Vegas, Nevada, United States
  • Jun 12th
Lulzbot Luminous Green PLA 3mm Filament

Lulzbot Luminous Green PLA 3mm Filament

  • Nashville, Tennessee, United States
  • Jun 12th
Filament plastic extruder

Filament plastic extruder

  • Houston, Texas, United States
  • Jun 12th
Signswise 5PCS 3D Printer 0.5mm Extruder Brass Nozzle Print Head for MK8 1.75mm

Signswise 5PCS 3D Printer 0.5mm Extruder Brass Nozzle Print Head for MK8 1.75mm

  • Temple City, California, United States
  • Jun 12th
MK10 Guide Tube - M7 Threaded Throat - Genuine Wanhao, fits others 3D Printers

MK10 Guide Tube - M7 Threaded Throat - Genuine Wanhao, fits others 3D Printers

  • Sheffield, United Kingdom
  • Jun 12th
MK9 Guide Tube - M6 Threaded Throat - Genuine Wanhao, fits others 3D Printers

MK9 Guide Tube - M6 Threaded Throat - Genuine Wanhao, fits others 3D Printers

  • Sheffield, United Kingdom
  • Jun 12th
SIBE AUTOMATION VACUUM FORMING MACHINE 48"X72" THERMOFORMING DUAL HEAT 2 PLATEN

SIBE AUTOMATION VACUUM FORMING MACHINE 48"X72" THERMOFORMING DUAL HEAT 2 PLATEN

  • Ocala, Florida, United States
  • Jun 12th
Used- Beringer 8" (200mm) Hydraulic Screen Changer, Model 203. Includes Beringer

Used- Beringer 8" (200mm) Hydraulic Screen Changer, Model 203. Includes Beringer

  • Bensenville, Illinois, United States
  • Jun 12th
Used- EDI 94" Autoflex AFII H40C Sheet Die. Approximately 2" diameter back cente

Used- EDI 94" Autoflex AFII H40C Sheet Die. Approximately 2" diameter back cente

  • Bensenville, Illinois, United States
  • Jun 12th
Used- Sano Design & Machine 104" Tension Roll Stand, Model L.N.-104"-5HP-400-STD

Used- Sano Design & Machine 104" Tension Roll Stand, Model L.N.-104"-5HP-400-STD

  • Bensenville, Illinois, United States
  • Jun 12th
Used- NRM Pacemaker IV 2-1/2" Single Screw Extruder, Model 2.5-24.1-PMIV-NV-EX.

Used- NRM Pacemaker IV 2-1/2" Single Screw Extruder, Model 2.5-24.1-PMIV-NV-EX.

  • Bensenville, Illinois, United States
  • Jun 12th
Used- NRM Pacemaker IV 2-1/2" Single Screw Extruder, Model 2.5-24.1-PMIV-RH/AC-N

Used- NRM Pacemaker IV 2-1/2" Single Screw Extruder, Model 2.5-24.1-PMIV-RH/AC-N

  • Bensenville, Illinois, United States
  • Jun 12th
Used- Gatto Cat-A-Puller. (2) 4-1/2" Wide x 22-1/2" long contact rubber belts.

Used- Gatto Cat-A-Puller. (2) 4-1/2" Wide x 22-1/2" long contact rubber belts.

  • Bensenville, Illinois, United States
  • Jun 12th
Used- Farris Belt Puller, Model B-500-VT. (2) Approximately 7" wide x 28" long c

Used- Farris Belt Puller, Model B-500-VT. (2) Approximately 7" wide x 28" long c

  • Bensenville, Illinois, United States
  • Jun 12th
Used- Metaplast Traveling Cut Off Saw, Model MST-4. Approximately 12" diameter

Used- Metaplast Traveling Cut Off Saw, Model MST-4. Approximately 12" diameter

  • Bensenville, Illinois, United States
  • Jun 12th
Used- EDI 20" Wide UltraFlex H-40 Sheet Die. Back center feed with an oval adapt

Used- EDI 20" Wide UltraFlex H-40 Sheet Die. Back center feed with an oval adapt

  • Bensenville, Illinois, United States
  • Jun 12th
Used- Novatec Vacuum Loading System, Model VPU-5HP, serial #8-7047-1936, built 2

Used- Novatec Vacuum Loading System, Model VPU-5HP, serial #8-7047-1936, built 2

  • Bensenville, Illinois, United States
  • Jun 12th
Used- Extron Pipe Puller, Model PVL NS 630-6. (6) Approximate 2" wide adjusted b

Used- Extron Pipe Puller, Model PVL NS 630-6. (6) Approximate 2" wide adjusted b

  • Bensenville, Illinois, United States
  • Jun 12th
Used- Corma Corrugator Model 120-6HSL, Maximum Line Speed 125 feet per minute, 4

Used- Corma Corrugator Model 120-6HSL, Maximum Line Speed 125 feet per minute, 4

  • Bensenville, Illinois, United States
  • Jun 12th

People who viewed this item also vieved

PROHEAT 5405-0195 Band Heater 240V 750W 1-5/8" ID 1-1/2" Long

PROHEAT 5405-0195 Band Heater 240V 750W 1-5/8" ID 1-1/2" Long

  • Wilmington, Ohio, United States
  • Jan 30th
Big Chief BC96-57-2031 Band Heater 240V 750W 7-3/4" ID 1-1/2" Long NEW

Big Chief BC96-57-2031 Band Heater 240V 750W 7-3/4" ID 1-1/2" Long NEW

  • Wilmington, Ohio, United States
  • Jan 30th
PROHEAT B7R1 JX4B Band Heater 240/480V 1000W 7-7/8" ID 1/12" Long NEW

PROHEAT B7R1 JX4B Band Heater 240/480V 1000W 7-7/8" ID 1/12" Long NEW

  • Wilmington, Ohio, United States
  • Jan 30th
Big Chief BC41023A Band Heater 1000W 240V With Spring 8-3/4" ID 1-1/4" Long NEW

Big Chief BC41023A Band Heater 1000W 240V With Spring 8-3/4" ID 1-1/4" Long NEW

  • Wilmington, Ohio, United States
  • Jan 30th
Big Chief BC41023A Band Heater 1000W 240V 8-3/4" ID 1-1/4" Long NEW

Big Chief BC41023A Band Heater 1000W 240V 8-3/4" ID 1-1/4" Long NEW

  • Wilmington, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies