+ Post new Ad
Used- Conair Carousel Dehumidifying Dryer, Gas Heated, Model D1600, Carbon Steel, US $11000 – Picture 0
Used- Conair Carousel Dehumidifying Dryer, Gas Heated, Model D1600, Carbon Steel, US $11000 – Picture 0

Used- Conair Carousel Dehumidifying Dryer, Gas Heated, Model D1600, Carbon Steel

US $11000

  • Bensenville, Illinois, United States
  • Jun 5th
Open on mobile:
QR code
Used- Conair Carousel Dehumidifying Dryer, Gas Heated, Model D1600, Carbon Steel Click To Enlarge Used- Conair Carousel Dehumidifying Dryer, Gas Heated, Model D1600, Carbon Steel. Approximate 1250 CFM, drying temperature range 160 to 250 degrees F. (5) Desiccant cartridges. Includes CD Carousel Dryer control, 10 hp blower. 3/60/460 volt. Serial # 174066. Includes 7500 LB. Insulated Drying Hopper, Model # CH74. ref #: 46585015 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

Z-ABS Orange 3D Printing Filament – 800g Spool

Z-ABS Orange 3D Printing Filament – 800g Spool

  • San Clemente, California, United States
  • Jun 6th
Zortrax M200 3D Printer Nozzle - NEW - Ready to Ship!

Zortrax M200 3D Printer Nozzle - NEW - Ready to Ship!

  • San Clemente, California, United States
  • Jun 6th
Z-ULTRAT Yellow 3D Printing Filament – 800g Spool

Z-ULTRAT Yellow 3D Printing Filament – 800g Spool

  • San Clemente, California, United States
  • Jun 6th
Battenfeld B2 Controller

Battenfeld B2 Controller

  • Woodinville, Washington, United States
  • Jun 6th
Used-Sterling Oil Temperature Control Model 6017-VX, Dual 100 kw. operating temp

Used-Sterling Oil Temperature Control Model 6017-VX, Dual 100 kw. operating temp

  • Bensenville, Illinois, United States
  • Jun 6th
Velleman VTBNCSP SPARE DIE FOR VTBNC

Velleman VTBNCSP SPARE DIE FOR VTBNC

  • Torrance, California, United States
  • Jun 6th
NEW Stratasys T12 TIP - Fortus 360, 400 900 3D Printer Tip

NEW Stratasys T12 TIP - Fortus 360, 400 900 3D Printer Tip

  • Springville, Utah, United States
  • Jun 6th
Used- 72" Wide In-Line Shear. Driven by a approximate 5hp motor(no tag). Include

Used- 72" Wide In-Line Shear. Driven by a approximate 5hp motor(no tag). Include

  • Bensenville, Illinois, United States
  • Jun 5th
Used- Wysong 72" Wide In-Line Shear, Model A-72. Hydraulically operated. Include

Used- Wysong 72" Wide In-Line Shear, Model A-72. Hydraulically operated. Include

  • Bensenville, Illinois, United States
  • Jun 5th
Used- Conair Carousel Dehumidifying Dryer, Gas Heated, Model CDG1000, Carbon Ste

Used- Conair Carousel Dehumidifying Dryer, Gas Heated, Model CDG1000, Carbon Ste

  • Bensenville, Illinois, United States
  • Jun 5th
Used- Kongskilde KIA Aspirator System Consisting Of: (1) Kongskilde KIA Aspirato

Used- Kongskilde KIA Aspirator System Consisting Of: (1) Kongskilde KIA Aspirato

  • Bensenville, Illinois, United States
  • Jun 5th
Used- Walton Stout Dual Desiccant Dryer, Model WSD255, Carbon Steel. Approximate

Used- Walton Stout Dual Desiccant Dryer, Model WSD255, Carbon Steel. Approximate

  • Bensenville, Illinois, United States
  • Jun 5th
Used- Pelletron Dedusting System, Model P1, 304 Stainless Steel. Rated up to 150

Used- Pelletron Dedusting System, Model P1, 304 Stainless Steel. Rated up to 150

  • Bensenville, Illinois, United States
  • Jun 5th
Used- Beringer Jet Cleaner Oven, Model 1724, Carbon Steel. Approximate 17" Diame

Used- Beringer Jet Cleaner Oven, Model 1724, Carbon Steel. Approximate 17" Diame

  • Bensenville, Illinois, United States
  • Jun 5th
Used- Goodman Stand-Alone Puller, Model 6E. Approximately 6" Wide x 24" Long. Ma

Used- Goodman Stand-Alone Puller, Model 6E. Approximately 6" Wide x 24" Long. Ma

  • Bensenville, Illinois, United States
  • Jun 5th
XAL-800G Automatic Material Feeding Machine,Vacuum Feeder,Auto Loader s

XAL-800G Automatic Material Feeding Machine,Vacuum Feeder,Auto Loader s

  • Erie, Pennsylvania, United States
  • Jun 5th
Used- Gardner Denver Dura Flow Horizontal Positive Displacement Blower, Model GG

Used- Gardner Denver Dura Flow Horizontal Positive Displacement Blower, Model GG

  • Bensenville, Illinois, United States
  • Jun 5th
Used- Davis Standard Model 165mm Gearbox. HP Capacity 526, gear ratio 17.21 to 1

Used- Davis Standard Model 165mm Gearbox. HP Capacity 526, gear ratio 17.21 to 1

  • Bensenville, Illinois, United States
  • Jun 5th
Used- Berstorff Cold Feed Extruder, Model E0. 1010/69, Carbon steel. Approximate

Used- Berstorff Cold Feed Extruder, Model E0. 1010/69, Carbon steel. Approximate

  • Bensenville, Illinois, United States
  • Jun 5th
Ensign Plastic Resin Blender Virgin Regrind Blending Hopper NICE Cost $17,000

Ensign Plastic Resin Blender Virgin Regrind Blending Hopper NICE Cost $17,000

  • Rockingham, North Carolina, United States
  • Jun 5th

People who viewed this item also vieved

DME CU-410-1 Firerod 500W 120V 5-4W

DME CU-410-1 Firerod 500W 120V 5-4W

  • Wilmington, Ohio, United States
  • Jan 30th
Band Heater 1S150-250LAP Band Heater 400W 120V NEW

Band Heater 1S150-250LAP Band Heater 400W 120V NEW

  • Wilmington, Ohio, United States
  • Jan 30th
Used Nissei 56MM & 63MM / Toshiba 60MM Injection Molding Screws W / Extras

Used Nissei 56MM & 63MM / Toshiba 60MM Injection Molding Screws W / Extras

  • Archbald, Pennsylvania, United States
  • Jan 30th
Arburg 28 ton Injection Molding Machine

Arburg 28 ton Injection Molding Machine

  • Vista, California, United States
  • Jan 30th
Mold Clamp, 7-inch Heavy Duty Closed Toe w/ Washers

Mold Clamp, 7-inch Heavy Duty Closed Toe w/ Washers

  • Claremont, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies