+ Post new Ad
Used- Extek 2-1/2" Hydraulic Screen Changer, Model HSC-25M. Dual breaker plates., US $3900 – Picture 0
Used- Extek 2-1/2" Hydraulic Screen Changer, Model HSC-25M. Dual breaker plates., US $3900 – Picture 0

Used- Extek 2-1/2" Hydraulic Screen Changer, Model Hsc-25m. Dual Breaker Plates.

US $3900

  • Bensenville, Illinois, United States
  • Jun 4th
Open on mobile:
QR code
Used- Extek 2-1/2" Hydraulic Screen Changer, Model HSC-25M. Dual breaker plates. Click To Enlarge Used- Extek 2-1/2" Hydraulic Screen Changer, Model HSC-25M. Dual breaker plates. Includes a 2hp, 3/60/208-230/460 volt, 1695/1720 rpm motor, hydraulic unit. ref #: 47014002 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

Used- Carter Day Spin-Away Spin Dryer, 304 Stainless Steel. Approximate 32” diam

Used- Carter Day Spin-Away Spin Dryer, 304 Stainless Steel. Approximate 32” diam

  • Bensenville, Illinois, United States
  • Jun 4th
Used- Nissui Granulator, Carbon Steel. Approximate 10" x 9" chamber, (2) S type

Used- Nissui Granulator, Carbon Steel. Approximate 10" x 9" chamber, (2) S type

  • Bensenville, Illinois, United States
  • Jun 4th
Used- Killion 2.5" Single Screw Extruder, Model KN250. Approximate 30 to 1 L/D r

Used- Killion 2.5" Single Screw Extruder, Model KN250. Approximate 30 to 1 L/D r

  • Bensenville, Illinois, United States
  • Jun 4th
Used- Conair Metaplast Cleated Belt Puller, Model PC8-60. Approximate 8" wide x

Used- Conair Metaplast Cleated Belt Puller, Model PC8-60. Approximate 8" wide x

  • Bensenville, Illinois, United States
  • Jun 4th
Used- Seishin Enterprise Orient Cutter Type Mill, Model VM-32, Carbon Steel. App

Used- Seishin Enterprise Orient Cutter Type Mill, Model VM-32, Carbon Steel. App

  • Bensenville, Illinois, United States
  • Jun 4th
Used- JSW Japan Steel Works 925mm (36.4") Wide Sheet Die, Model T-Die. Fixed lip

Used- JSW Japan Steel Works 925mm (36.4") Wide Sheet Die, Model T-Die. Fixed lip

  • Bensenville, Illinois, United States
  • Jun 4th
Used- JSW Japan Steel Works 1530mm (60.2") Wide Sheet Die, Model T-Die. Fixed li

Used- JSW Japan Steel Works 1530mm (60.2") Wide Sheet Die, Model T-Die. Fixed li

  • Bensenville, Illinois, United States
  • Jun 4th
Used- Hunter Payoff Stand. Capacity 48" diameter x 48" long roll. Adjustable man

Used- Hunter Payoff Stand. Capacity 48" diameter x 48" long roll. Adjustable man

  • Bensenville, Illinois, United States
  • Jun 4th
Used- Aluminum Products & Processes Rewind Stand. Capacity 48" diameter x 48" lo

Used- Aluminum Products & Processes Rewind Stand. Capacity 48" diameter x 48" lo

  • Bensenville, Illinois, United States
  • Jun 4th
Used- Hunter Payoff Stand. Approximate capacity 48" diameter x 48" long roll. Ad

Used- Hunter Payoff Stand. Approximate capacity 48" diameter x 48" long roll. Ad

  • Bensenville, Illinois, United States
  • Jun 4th
Used- Egan 84" Wide Sheet Die. Back center feed. Serial# 92-14493-01-03.

Used- Egan 84" Wide Sheet Die. Back center feed. Serial# 92-14493-01-03.

  • Bensenville, Illinois, United States
  • Jun 4th
Used- Egan 84" Wide Sheet Die. Back center feed. Serial# 229198.

Used- Egan 84" Wide Sheet Die. Back center feed. Serial# 229198.

  • Bensenville, Illinois, United States
  • Jun 4th
Used- EDI Extrusion Dies 73" Wide Autoflex H40 Sheet Die. Approximately 4" wide

Used- EDI Extrusion Dies 73" Wide Autoflex H40 Sheet Die. Approximately 4" wide

  • Bensenville, Illinois, United States
  • Jun 4th
Used- EDI Extrusion Dies 94" Wide Autoflex H40 Sheet Die. Approximately 4" wide

Used- EDI Extrusion Dies 94" Wide Autoflex H40 Sheet Die. Approximately 4" wide

  • Bensenville, Illinois, United States
  • Jun 4th
Used- EDI Extrusion Dies 90" Wide Autoflex H40C Sheet Die. Approximately 4" wide

Used- EDI Extrusion Dies 90" Wide Autoflex H40C Sheet Die. Approximately 4" wide

  • Bensenville, Illinois, United States
  • Jun 4th
Used- Egan 84" Sheet Die. Back center feed. Serial# 92-14493-01.

Used- Egan 84" Sheet Die. Back center feed. Serial# 92-14493-01.

  • Bensenville, Illinois, United States
  • Jun 4th
Used- EDI Extrusion Dies 86" Wide Autoflex H40C Sheet Die. Approximately 4" wide

Used- EDI Extrusion Dies 86" Wide Autoflex H40C Sheet Die. Approximately 4" wide

  • Bensenville, Illinois, United States
  • Jun 4th
Used- EDI Extrusion Dies 85" Wide Autoflex H40C Sheet Die. Approximately 4" wide

Used- EDI Extrusion Dies 85" Wide Autoflex H40C Sheet Die. Approximately 4" wide

  • Bensenville, Illinois, United States
  • Jun 4th
Used- EDI Extrusion Dies 98" Wide Autoflex H40 Sheet Die. Approximately 4" wide

Used- EDI Extrusion Dies 98" Wide Autoflex H40 Sheet Die. Approximately 4" wide

  • Bensenville, Illinois, United States
  • Jun 4th
Used- C.W. Brabender Plasti-Corder Mixing System consisting of: (1) Direct Curre

Used- C.W. Brabender Plasti-Corder Mixing System consisting of: (1) Direct Curre

  • Bensenville, Illinois, United States
  • Jun 4th

People who viewed this item also vieved

Ogden 8" X 7/8" Band heater, 550W 240V

Ogden 8" X 7/8" Band heater, 550W 240V

  • McKees Rocks, Pennsylvania, United States
  • Jan 30th
3" X 9 1/2" Fast heat band heater, 2500W 460V, XCSA

3" X 9 1/2" Fast heat band heater, 2500W 460V, XCSA

  • McKees Rocks, Pennsylvania, United States
  • Jan 30th
I.H. Co. 9 1/4" X 1 1/2" Band heater, 1500W 240V

I.H. Co. 9 1/4" X 1 1/2" Band heater, 1500W 240V

  • McKees Rocks, Pennsylvania, United States
  • Jan 30th
Band Heater, 1350 Watt, 240 Volt, 3 3/4" X 4", B-27543

Band Heater, 1350 Watt, 240 Volt, 3 3/4" X 4", B-27543

  • McKees Rocks, Pennsylvania, United States
  • Jan 30th
Fast Heat 10" X 2 7/8" band heater w/ hole, 2100W 480V, BSP 233 879

Fast Heat 10" X 2 7/8" band heater w/ hole, 2100W 480V, BSP 233 879

  • McKees Rocks, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies