+ Post new Ad
Used- Henschel High Intensity Mixer, Model FM200C, Approximately 200 Liter, 7 Cu, US $1700 – Picture 0
Used- Henschel High Intensity Mixer, Model FM200C, Approximately 200 Liter, 7 Cu, US $1700 – Picture 0

Used- Henschel High Intensity Mixer, Model Fm200c, Approximately 200 Liter, 7 Cu

US $1700

  • Bensenville, Illinois, United States
  • Jun 1st
Open on mobile:
QR code
A 3% Convenience Fee will be charged if paying by credit card. The mixer has a capacity of approximately 200 liters or 7 cubic feet and is made of 304 stainless steel with a carbon steel jacketed bowl. If the purchased item is not as described, the seller may offer a similar item or a full refund. The mixer is driven by a 28/40 kw (37/53 hp), 3/60/460 volt, 880-1770 rpm motor and is base-mounted. Shipping and handling services are available and the item is located in Bensenville, Illinois, USA. The bowl has a diameter of 26 inches and a depth of 26 inches. This is a listing for a used Henschel High Intensity Mixer, Model FM200C. It also has a swing away top cover with a baffle and a 2-tier blade, as well as a side bottom outlet with a plug valve. Payment methods accepted include company checks, wire transfers, purchase orders, Visa/MasterCard, and Amex. For more information and inquiries, please contact Andy Cohen at Aaron Equipment Company. Its serial number is 82-53-19 and it was built in 1982.

Directions

Similar products from Other Plastic Processing Tools

Used- Thoreson-McCosh Closed Loop Triple Dessicant Bed Dryer, Model TD-360. CFM

Used- Thoreson-McCosh Closed Loop Triple Dessicant Bed Dryer, Model TD-360. CFM

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Thorsen-McCosh Closed Loop Triple Dessicant Bed Dryer, ModelTD-180. CFM 18

Used- Thorsen-McCosh Closed Loop Triple Dessicant Bed Dryer, ModelTD-180. CFM 18

  • Bensenville, Illinois, United States
  • Jun 1st
Used- S. F. Scheer Strand Pelletizer, Model HSG800. 32" wide x approximately 8"

Used- S. F. Scheer Strand Pelletizer, Model HSG800. 32" wide x approximately 8"

  • Bensenville, Illinois, United States
  • Jun 1st
USED: 6" Hydraulic Screen Changer. Includes a Beringer model GA2C12FXW33022 powe

USED: 6" Hydraulic Screen Changer. Includes a Beringer model GA2C12FXW33022 powe

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Battenfeld B130 Twin Screws. One set of (2) screws, approximately 130 mm.

Used- Battenfeld B130 Twin Screws. One set of (2) screws, approximately 130 mm.

  • Bensenville, Illinois, United States
  • Jun 1st
USED- Killian Cast Film Station. Casting roll 8" diameter x 10" wide. Includes p

USED- Killian Cast Film Station. Casting roll 8" diameter x 10" wide. Includes p

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Embossing Roll Stand. 6" Diameter x 6" face, driven by a 0.5hp, 1/60/115-2

Used- Embossing Roll Stand. 6" Diameter x 6" face, driven by a 0.5hp, 1/60/115-2

  • Bensenville, Illinois, United States
  • Jun 1st
USED- 4.5" Hydraulic Screen Changer. Mounted on a base. No power pack.

USED- 4.5" Hydraulic Screen Changer. Mounted on a base. No power pack.

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Plastiprogram 1.3" Single Screw Extruder, Model RS35, Approximately 24:1 L

Used- Plastiprogram 1.3" Single Screw Extruder, Model RS35, Approximately 24:1 L

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Plastiprogram 1.9" Single Screw Extruder, Model RS50, approximately 24:1 L

Used- Plastiprogram 1.9" Single Screw Extruder, Model RS50, approximately 24:1 L

  • Bensenville, Illinois, United States
  • Jun 1st
Used- NRM 5" Single Shank Extruder Screw, Approximate 30:1 L/D ratio. Overall sc

Used- NRM 5" Single Shank Extruder Screw, Approximate 30:1 L/D ratio. Overall sc

  • Bensenville, Illinois, United States
  • Jun 1st
Used- 5" Single Screw for Extruder, approximately 36:1 L/D ratio. Overall screw

Used- 5" Single Screw for Extruder, approximately 36:1 L/D ratio. Overall screw

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Welex Horizontal Cooler, Type 4200HC, 78 Cubic Feet, 304 Stainless Steel.

Used- Welex Horizontal Cooler, Type 4200HC, 78 Cubic Feet, 304 Stainless Steel.

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Weima Shredder, Model WLH600S/30, Carbon Steel. Approximately 14-1/2'' dia

Used- Weima Shredder, Model WLH600S/30, Carbon Steel. Approximately 14-1/2'' dia

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Roots Positive Displacement Blower, model 406RAM, carbon steel. 4'' NPT in

Used- Roots Positive Displacement Blower, model 406RAM, carbon steel. 4'' NPT in

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Krauss Maffei Horizontal Injection Molder, 250 Tons, Model 250-1650 B2. Ap

Used- Krauss Maffei Horizontal Injection Molder, 250 Tons, Model 250-1650 B2. Ap

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Wayne Machine & Die Blown Film Die. Approximate 2-5/8" diameter. 3/4" Feed

Used- Wayne Machine & Die Blown Film Die. Approximate 2-5/8" diameter. 3/4" Feed

  • Bensenville, Illinois, United States
  • Jun 1st
Used- 6" Vertical Push Through Style Hydraulic Screen Changer. Includes a 2hp, 3

Used- 6" Vertical Push Through Style Hydraulic Screen Changer. Includes a 2hp, 3

  • Bensenville, Illinois, United States
  • Jun 1st
Used- NRM three roll vertical sheet stack, 16" diameter x 53" wide roll face rol

Used- NRM three roll vertical sheet stack, 16" diameter x 53" wide roll face rol

  • Bensenville, Illinois, United States
  • Jun 1st
Used- NRM Pacemaker III 2-1/2" Single Screw Extruder, Model 2.5-PMIIII-24.1. App

Used- NRM Pacemaker III 2-1/2" Single Screw Extruder, Model 2.5-PMIIII-24.1. App

  • Bensenville, Illinois, United States
  • Jun 1st

People who viewed this item also vieved

Manumold MK.4 77/24 Screw Injection Mold - 24 ton

Manumold MK.4 77/24 Screw Injection Mold - 24 ton

  • Lansing, Michigan, United States
  • Feb 13th
Conair TLM Direct Feed Tubeloader, Vacuum loader, excellent molding extrusion !

Conair TLM Direct Feed Tubeloader, Vacuum loader, excellent molding extrusion !

  • Hollywood, Florida, United States
  • Feb 13th
Fast Heat Mica Band Heater 8 1/4" Dia X 2 1/2" Wide 7500W 240V BM027904 BH-28

Fast Heat Mica Band Heater 8 1/4" Dia X 2 1/2" Wide 7500W 240V BM027904 BH-28

  • Tallahassee, Florida, United States
  • Feb 13th
Fast Heat Mica Band Heater 3" Dia X 1" Wide 200W 240V MSP2652 36" SS Leads BH-27

Fast Heat Mica Band Heater 3" Dia X 1" Wide 200W 240V MSP2652 36" SS Leads BH-27

  • Tallahassee, Florida, United States
  • Feb 13th
Fast Heat Mica Band Heater 9 3/4" Dia X 1 1/2" Wide 1000W 120V BM022166 BH-26

Fast Heat Mica Band Heater 9 3/4" Dia X 1 1/2" Wide 1000W 120V BM022166 BH-26

  • Tallahassee, Florida, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies