+ Post new Ad
USED- Killian Cast Film Station. Casting roll 8" diameter x 10" wide. Includes p, US $9987 – Picture 0
USED- Killian Cast Film Station. Casting roll 8" diameter x 10" wide. Includes p, US $9987 – Picture 0

Used- Killian Cast Film Station. Casting Roll 8" Diameter X 10" Wide. Includes P

US $9987

  • Bensenville, Illinois, United States
  • Jun 1st
Open on mobile:
QR code
This is a USED Killian Cast Film Station, with an 8" diameter x 10" wide casting roll that includes a pull roll, (1) rubber, and (1) metal. The size of these rolls are 5" diameter x 10" wide. The rolls are powered by a 1/2 HP, 180 Volt DC gearmotor with Seco DC drive, and the station is mounted on casters for easy transportation. The reference number for this item is 86574. If you are interested in purchasing this item, please contact Andy Cohen at Aaron Equipment Company, located at 735 E. Green St., P.O. Box 80, Bensenville, Illinois, 60106. Their phone number is 630-350-2200. Accepted payment methods include company checks, wire transfers, purchase orders, Visa/MasterCard, and Amex. Base shipment costs $150.00, and all items are sold FOB Bensenville, Il. location unless otherwise noted. If you receive an item that is not as described in the listing, the seller may offer a similar item or issue you a full refund. Please note that while this item is listed as in-stock inventory, it may be subject to prior sale, in which case the seller will work to find a replacement item or offer a full refund. Freight services are available, and shipping costs may vary depending on the shipment location and type of freight carrier selected.

Directions

Similar products from Other Plastic Processing Tools

Makerbot Replicator 2 3D Printer - Seller Rebuilt, low hours!

Makerbot Replicator 2 3D Printer - Seller Rebuilt, low hours!

  • Charlottesville, Virginia, United States
  • Jun 2nd
Vacuum Forming Oven

Vacuum Forming Oven

  • Shelby, North Carolina, United States
  • Jun 2nd
PVI Thermal Forming Machine (Vacuum Former; Thermal Former; Thermoformer)

PVI Thermal Forming Machine (Vacuum Former; Thermal Former; Thermoformer)

  • Warren, Michigan, United States
  • Jun 2nd
Used- Normag Gear Pump, Model MJEP-240, Carbon Steel. Driven by a 10 hp, 3/60/23

Used- Normag Gear Pump, Model MJEP-240, Carbon Steel. Driven by a 10 hp, 3/60/23

  • Bensenville, Illinois, United States
  • Jun 1st
Used- M A Industries Pellet Cooler, Model P7171001-0, Carbon Steel. 12" wide x 1

Used- M A Industries Pellet Cooler, Model P7171001-0, Carbon Steel. 12" wide x 1

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Thoreson-McCosh Closed Loop Triple Dessicant Bed Dryer, Model TD-360. CFM

Used- Thoreson-McCosh Closed Loop Triple Dessicant Bed Dryer, Model TD-360. CFM

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Thorsen-McCosh Closed Loop Triple Dessicant Bed Dryer, ModelTD-180. CFM 18

Used- Thorsen-McCosh Closed Loop Triple Dessicant Bed Dryer, ModelTD-180. CFM 18

  • Bensenville, Illinois, United States
  • Jun 1st
Used- S. F. Scheer Strand Pelletizer, Model HSG800. 32" wide x approximately 8"

Used- S. F. Scheer Strand Pelletizer, Model HSG800. 32" wide x approximately 8"

  • Bensenville, Illinois, United States
  • Jun 1st
USED: 6" Hydraulic Screen Changer. Includes a Beringer model GA2C12FXW33022 powe

USED: 6" Hydraulic Screen Changer. Includes a Beringer model GA2C12FXW33022 powe

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Battenfeld B130 Twin Screws. One set of (2) screws, approximately 130 mm.

Used- Battenfeld B130 Twin Screws. One set of (2) screws, approximately 130 mm.

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Embossing Roll Stand. 6" Diameter x 6" face, driven by a 0.5hp, 1/60/115-2

Used- Embossing Roll Stand. 6" Diameter x 6" face, driven by a 0.5hp, 1/60/115-2

  • Bensenville, Illinois, United States
  • Jun 1st
USED- 4.5" Hydraulic Screen Changer. Mounted on a base. No power pack.

USED- 4.5" Hydraulic Screen Changer. Mounted on a base. No power pack.

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Plastiprogram 1.3" Single Screw Extruder, Model RS35, Approximately 24:1 L

Used- Plastiprogram 1.3" Single Screw Extruder, Model RS35, Approximately 24:1 L

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Plastiprogram 1.9" Single Screw Extruder, Model RS50, approximately 24:1 L

Used- Plastiprogram 1.9" Single Screw Extruder, Model RS50, approximately 24:1 L

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Henschel High Intensity Mixer, Model FM200C, Approximately 200 Liter, 7 Cu

Used- Henschel High Intensity Mixer, Model FM200C, Approximately 200 Liter, 7 Cu

  • Bensenville, Illinois, United States
  • Jun 1st
Used- NRM 5" Single Shank Extruder Screw, Approximate 30:1 L/D ratio. Overall sc

Used- NRM 5" Single Shank Extruder Screw, Approximate 30:1 L/D ratio. Overall sc

  • Bensenville, Illinois, United States
  • Jun 1st
Used- 5" Single Screw for Extruder, approximately 36:1 L/D ratio. Overall screw

Used- 5" Single Screw for Extruder, approximately 36:1 L/D ratio. Overall screw

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Welex Horizontal Cooler, Type 4200HC, 78 Cubic Feet, 304 Stainless Steel.

Used- Welex Horizontal Cooler, Type 4200HC, 78 Cubic Feet, 304 Stainless Steel.

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Weima Shredder, Model WLH600S/30, Carbon Steel. Approximately 14-1/2'' dia

Used- Weima Shredder, Model WLH600S/30, Carbon Steel. Approximately 14-1/2'' dia

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Roots Positive Displacement Blower, model 406RAM, carbon steel. 4'' NPT in

Used- Roots Positive Displacement Blower, model 406RAM, carbon steel. 4'' NPT in

  • Bensenville, Illinois, United States
  • Jun 1st

People who viewed this item also vieved

front panel for Toyo E or ES machine

front panel for Toyo E or ES machine

  • Garland, Texas, United States
  • Feb 13th
Heat controls for Toyo 200 E or ES machine

Heat controls for Toyo 200 E or ES machine

  • Garland, Texas, United States
  • Feb 13th
HPM 110TP-6.5/6.5 Injection Molding Machine

HPM 110TP-6.5/6.5 Injection Molding Machine

  • Concord, North Carolina, United States
  • Feb 13th
Manual Plastic Injection Machine Mold ThermoJect Ject by L.J. Technical Systems

Manual Plastic Injection Machine Mold ThermoJect Ject by L.J. Technical Systems

  • Adairsville, Georgia, United States
  • Feb 13th
Manumold MK.4 77/24 Screw Injection Mold - 24 ton

Manumold MK.4 77/24 Screw Injection Mold - 24 ton

  • Lansing, Michigan, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies