Used Kontron 3U CPCI / CompactPCI Chassis / with CP306 CPU System Controller, US $450.00 – Picture 0

Used Kontron 3U CPCI / CompactPCI Chassis / with CP306 CPU System Controller, US $450.00 – Picture 1

Used Kontron 3U CPCI / CompactPCI Chassis / with CP306 CPU System Controller, US $450.00 – Picture 2

Used Kontron 3U CPCI / CompactPCI Chassis / with CP306 CPU System Controller, US $450.00 – Picture 3

Used Kontron 3U CPCI / CompactPCI Chassis / with CP306 CPU System Controller, US $450.00 – Picture 4

Used Kontron 3U CPCI / CompactPCI Chassis / with CP306 CPU System Controller, US $450.00 – Picture 5

Used Kontron 3U CPCI / CompactPCI Chassis / with CP306 CPU System Controller, US $450.00 – Picture 6

Used Kontron 3U CPCI / CompactPCI Chassis / with CP306 CPU System Controller, US $450.00 – Picture 7

Used Kontron 3U CPCI / CompactPCI Chassis / with CP306 CPU System Controller, US $450.00 – Picture 8

Used Kontron 3u Cpci / Compactpci Chassis / With Cp306 Cpu System Controller

US $450.00

Lawrence, Massachusetts, United States
Jan 29th

Open on mobile:
QR code

For sale is a used 3U cPCI (Compact PCI) 5-slot chassis with 8HP system controller (additional 4HP COM1/2, PS/2, Reset button, Floppy port, parallel port). The CPU unit does not come with a standard HDD or power cord. Guaranteed to function properly. Below are some manufacturers specs on the CPU: Processor: Mobile low power Pentium M processor in Micro-FCBGA 479 package 2x 32KB L1 cache and 1MByte L2 cache 400MHz processor system bus 0.13u silicon process with 1.48V (1.6GHz) / 1.18V (1.1GHz) / 0.96V / 600MHz core voltage Maximum internal junction temperature 100 C Long term available versions: - 1.1GHz LV low power dissipation, extended temperature range option - 1.6GHz high performance /higher frequency versions when available All board versions are passive cooled, fan-less heatsink within 4HP height Memory: 333 MHz memory speed, Intel 82855GME GMCH 256MByte or 512MByte soldered DDR-SDRAM with ECC CompactFlash socket type II (Flash or Microdrive HDD) Onboard 2.5" HDD mounting within 8HP 1MB Firmware Hub for BIOS 8KByte EEPROM for CMOS data storing (no battery operation) Front Panel Functions: 4HP: Ethernet: Two RJ-45 with integrated LED s (ACT, SPEED) Top connector: VGA-CRT 15-pin D-Sub SVGA connector USB: Two 4-pin connectors LED·s: ACT, SPEED (LAN), Thermal, Watchdog or both general purpose 8HP: Additional to 4HP COM1/2: Two 9-pin D-Sub (RS232/422/485 jumper selectable) Keyb/Mouse: PS/2 Reset: Reset button, guarded LED: HDD active Software Support: Phoenix BIOS with QuickBoot, QuietBoot, BootBlock, MultiBoot III, PC Health Monitoring, Serial port remote control with CMOS setup access, BIOS parameters saved in EEPROM, diskless, keyboardless, videoless operation. LAN boot support. USB Floppy boot, USB memory stick boot. Plug&Play capability. Board identification number accessible via EEPROM Support for Windows 2000, XP Pro, XP Embedded, Linux , VxWorks , (other OS’s may be possible, please contact us for information). Connectivity: Ethernet: 1st: Intel 82540EM based 10/100/1000MBit/s Gigabit Ethernet controller at front 2nd:Intel 82801DB ICH4 10/100Base-TX Ethernet controller (based on 82559; front or rear IO) VGA: Intel 82855GME GMCH internal VGA controller providing 2048x1536x8bit/60Hz resplution, max. shared memory 64MB USB: 4x USB2.0 channels up to 480Mbit/s, 2 as front IO, 2 as rear IO COM: UART with two 16C550 compatible RS232 ports as rear IO IDE: Two EIDE interfaces, Ultra ATA\100, 100MB/sec Primary port ATA\33 connected to CompactFlash socket & rear IO Secondary port ATA\100 40-pin, 2.54mm connector onboard 8HP additions: COM: Additional 2 COM ports (front IO), 4 COM ports in total PS/2: PS/2 for keyboard and mouse legacy support (front IO) IDE: Secondary port ATA\100 two 40-pin, 2.54mm connector s, one for onboard 2.5" EIDE Flash Disk or HDD mounting option, anotherone for external devices like CD-ROM Floppy: Standard Floppy connector LPT: The parallel port is accessible as onboard 26-pin row connector ****************************************************************************** Shipping: Standard USPS or UPS GND (Buyer to pay extra if overnight delivery is required) Payment: Paypal ONLY Returns: Full returns or exchange if item is DOA and we are contacted within 14 days of receipt Feedback: Please provide positive feedback or let us work with you before leaving negative feedback

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	KONTRON
Model	ASM-3