used metal shelving with sliding ladders, US $5,000.00 – Picture 0

used metal shelving with sliding ladders, US $5,000.00 – Picture 1

used metal shelving with sliding ladders, US $5,000.00 – Picture 2

used metal shelving with sliding ladders, US $5,000.00 – Picture 3

used metal shelving with sliding ladders, US $5,000.00 – Picture 4

used metal shelving with sliding ladders, US $5,000.00 – Picture 5

used metal shelving with sliding ladders, US $5,000.00 – Picture 6

used metal shelving with sliding ladders, US $5,000.00 – Picture 7

used metal shelving with sliding ladders, US $5,000.00 – Picture 8

used metal shelving with sliding ladders, US $5,000.00 – Picture 9

used metal shelving with sliding ladders, US $5,000.00 – Picture 10

used metal shelving with sliding ladders, US $5,000.00 – Picture 11

Used Metal Shelving With Sliding Ladders

US $5,000.00

Tampa, Florida, United States
Mar 27th

Open on mobile:
QR code

This listing is for the of the pieces shown in the above pictures. The first three pictures show the shelves installed in a commercial storage facitlity. They have been removed and stored on pallets and have accumilited a small amount of rust threw out the set. This rust is not a structeral issue and could be touched up with a can of cold galvanazing spray. This is a generic shelving system that can be assembled in any configeration. Each shelving post stands 12 feet tall and has clips on each side of the post so that one post may be used to support two sides of the shelving unit and be joined together with each veritcal support post. There is no harware needed to connect shelves and vertical posts as they use a clip on system. I have used them inside a steel shipping container for tool racks. I cut the 12 foot tall shelving posts into 6 foot tall sections. The rolling ladders mount on a tubular rail and slide on wheels in the track as well as slinding on wheels on the bottom. The original system was set up as 4 rows of shelving 12 feet tall with each unit of shelving connected back to back and side to side and a ladder rolling down each side of row. If you where to connect all the posts together wtih the 47 in wide shelves you have app 160 linear feet of 12 foot tall shelves. If you cut the vertical posts in half you have 320 feet of 6 foot tall shelves. We have the following count on the product. 12 foot verical support post approximately: 40 79 inch long shelves approxamitely: 200 Sliding 9 foot tall ladders: 4 Assorted cross bracing included Specs : shelving height : 12 feet tall shelving depth: 12 inches deep shelving width: 47 inches wide shelving guage : 22 medium duty ladder height : 9 fett tall ladder type: metal ladder motion : hard rail mount with side ways sliding motion on hard rubber casters. shelf spacing : 1.5 inch increments vertically coating: baked on gray enamel paint Used price will be $ 5,000.00 I will package the system on pallets and load onto a truck if you require freight. I will also deliver inside the state of Florida. If you require the shelving to be installed I will give you a price if requested.

“these units have been stored outside and have some minor very light on a few areas. nuts and bolts that attach ladders to shelving units are not with this listing”

Country/Region of Manufacture

Unknown