+ Post new Ad
Used- Plastiprogram 1.3" Single Screw Extruder, Model RS35, Approximately 24:1 L, US $8100 – Picture 0
Used- Plastiprogram 1.3" Single Screw Extruder, Model RS35, Approximately 24:1 L, US $8100 – Picture 0

Used- Plastiprogram 1.3" Single Screw Extruder, Model Rs35, Approximately 24:1 L

US $8100

  • Bensenville, Illinois, United States
  • Jun 1st
Open on mobile:
QR code
Used- Plastiprogram 1.3" Single Screw Extruder, Model RS35, Approximately 24:1 L Click To Enlarge Used- Plastiprogram 1.3" Single Screw Extruder, Model RS35, Approximately 24:1 L/D Ratio. Electrically heated, air cooled 3 zone non-vented barrel. Water cooled feed with hopper, approximately 41" centerline height. Driven by a 10 hp, 500 Volt DC motor with gearbox. Control panel with Watlow controllers. ref #: 87249 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

Used- Normag Gear Pump, Model MJEP-240, Carbon Steel. Driven by a 10 hp, 3/60/23

Used- Normag Gear Pump, Model MJEP-240, Carbon Steel. Driven by a 10 hp, 3/60/23

  • Bensenville, Illinois, United States
  • Jun 1st
Used- M A Industries Pellet Cooler, Model P7171001-0, Carbon Steel. 12" wide x 1

Used- M A Industries Pellet Cooler, Model P7171001-0, Carbon Steel. 12" wide x 1

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Thoreson-McCosh Closed Loop Triple Dessicant Bed Dryer, Model TD-360. CFM

Used- Thoreson-McCosh Closed Loop Triple Dessicant Bed Dryer, Model TD-360. CFM

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Thorsen-McCosh Closed Loop Triple Dessicant Bed Dryer, ModelTD-180. CFM 18

Used- Thorsen-McCosh Closed Loop Triple Dessicant Bed Dryer, ModelTD-180. CFM 18

  • Bensenville, Illinois, United States
  • Jun 1st
Used- S. F. Scheer Strand Pelletizer, Model HSG800. 32" wide x approximately 8"

Used- S. F. Scheer Strand Pelletizer, Model HSG800. 32" wide x approximately 8"

  • Bensenville, Illinois, United States
  • Jun 1st
USED: 6" Hydraulic Screen Changer. Includes a Beringer model GA2C12FXW33022 powe

USED: 6" Hydraulic Screen Changer. Includes a Beringer model GA2C12FXW33022 powe

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Battenfeld B130 Twin Screws. One set of (2) screws, approximately 130 mm.

Used- Battenfeld B130 Twin Screws. One set of (2) screws, approximately 130 mm.

  • Bensenville, Illinois, United States
  • Jun 1st
USED- Killian Cast Film Station. Casting roll 8" diameter x 10" wide. Includes p

USED- Killian Cast Film Station. Casting roll 8" diameter x 10" wide. Includes p

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Embossing Roll Stand. 6" Diameter x 6" face, driven by a 0.5hp, 1/60/115-2

Used- Embossing Roll Stand. 6" Diameter x 6" face, driven by a 0.5hp, 1/60/115-2

  • Bensenville, Illinois, United States
  • Jun 1st
USED- 4.5" Hydraulic Screen Changer. Mounted on a base. No power pack.

USED- 4.5" Hydraulic Screen Changer. Mounted on a base. No power pack.

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Plastiprogram 1.9" Single Screw Extruder, Model RS50, approximately 24:1 L

Used- Plastiprogram 1.9" Single Screw Extruder, Model RS50, approximately 24:1 L

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Henschel High Intensity Mixer, Model FM200C, Approximately 200 Liter, 7 Cu

Used- Henschel High Intensity Mixer, Model FM200C, Approximately 200 Liter, 7 Cu

  • Bensenville, Illinois, United States
  • Jun 1st
Used- NRM 5" Single Shank Extruder Screw, Approximate 30:1 L/D ratio. Overall sc

Used- NRM 5" Single Shank Extruder Screw, Approximate 30:1 L/D ratio. Overall sc

  • Bensenville, Illinois, United States
  • Jun 1st
Used- 5" Single Screw for Extruder, approximately 36:1 L/D ratio. Overall screw

Used- 5" Single Screw for Extruder, approximately 36:1 L/D ratio. Overall screw

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Welex Horizontal Cooler, Type 4200HC, 78 Cubic Feet, 304 Stainless Steel.

Used- Welex Horizontal Cooler, Type 4200HC, 78 Cubic Feet, 304 Stainless Steel.

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Weima Shredder, Model WLH600S/30, Carbon Steel. Approximately 14-1/2'' dia

Used- Weima Shredder, Model WLH600S/30, Carbon Steel. Approximately 14-1/2'' dia

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Roots Positive Displacement Blower, model 406RAM, carbon steel. 4'' NPT in

Used- Roots Positive Displacement Blower, model 406RAM, carbon steel. 4'' NPT in

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Krauss Maffei Horizontal Injection Molder, 250 Tons, Model 250-1650 B2. Ap

Used- Krauss Maffei Horizontal Injection Molder, 250 Tons, Model 250-1650 B2. Ap

  • Bensenville, Illinois, United States
  • Jun 1st
Used- Wayne Machine & Die Blown Film Die. Approximate 2-5/8" diameter. 3/4" Feed

Used- Wayne Machine & Die Blown Film Die. Approximate 2-5/8" diameter. 3/4" Feed

  • Bensenville, Illinois, United States
  • Jun 1st
Used- 6" Vertical Push Through Style Hydraulic Screen Changer. Includes a 2hp, 3

Used- 6" Vertical Push Through Style Hydraulic Screen Changer. Includes a 2hp, 3

  • Bensenville, Illinois, United States
  • Jun 1st

People who viewed this item also vieved

HPM 110TP-6.5/6.5 Injection Molding Machine

HPM 110TP-6.5/6.5 Injection Molding Machine

  • Concord, North Carolina, United States
  • Feb 13th
Manual Plastic Injection Machine Mold ThermoJect Ject by L.J. Technical Systems

Manual Plastic Injection Machine Mold ThermoJect Ject by L.J. Technical Systems

  • Adairsville, Georgia, United States
  • Feb 13th
Manumold MK.4 77/24 Screw Injection Mold - 24 ton

Manumold MK.4 77/24 Screw Injection Mold - 24 ton

  • Lansing, Michigan, United States
  • Feb 13th
Conair TLM Direct Feed Tubeloader, Vacuum loader, excellent molding extrusion !

Conair TLM Direct Feed Tubeloader, Vacuum loader, excellent molding extrusion !

  • Hollywood, Florida, United States
  • Feb 13th
Fast Heat Mica Band Heater 8 1/4" Dia X 2 1/2" Wide 7500W 240V BM027904 BH-28

Fast Heat Mica Band Heater 8 1/4" Dia X 2 1/2" Wide 7500W 240V BM027904 BH-28

  • Tallahassee, Florida, United States
  • Feb 13th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies