US $16.95
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “Good used. Some chips on cutting edge. Drill needs resharpened.” |
Directions
Similar products from Solid Carbide Drill Bits
Aircraft Tools (Qty 10) .2188" Tungsten INC. 4FL Solid Carbide Mill Drill AV737
NEW ISCAR 7.9mm ( approx. 5/16 ") SCD 079-043-080 ACP5 IC908 SOLID CARBIDE DRILL
40 new garr solid carbide number drills.
Sandvik / Coromant CoroDrill 460-XM, 0.3425", Solid Carbide Drill Bit
50 pcs. Mix lot, Carbide Drill Bits, Dremel / Jewelry / Tools, USED
HAN 400216006RT TIALN-RT SC FIN 2 FL NONDIN FIN 2FL 16X16X32X89 CARBIDE END MILL
ULTRATOOL 13/64" 118PT CARBIDE STUB DRILL
LMT Onsrud 62-634 21/64" Single Edge Solid Carbide Downcut Bit for Aluminum
10 PCS D 1,0 mm SOLID CARBIDE DRILL PCB coated.
SCRAPE SOLID CARBIDE END MILLS. SGS & OSG.
NEW ISCAR IWSN433 INSERTS 10 PCS.
Lot of (9) Solid Carbide Drills
1/2" SSC Stainless With Carbide Tips Cutting Tool TRW-Greenfield/Wendt-Sonis
1" Inch SSC Stainless. Steel Carbide Tips Drill Tool TRW-Greenfield/Wendt-Sonis
5Pcs WALTER TITEX A3162-0.79mm Micro Twist Drill Solid Carbide
5Pcs WALTER TITEX A3162-0.46mm Micro Twist Drill Solid Carbide
29/64" Heavy Duty Jobbers Length Black Oxide Drill Bits, 135 Deg Split Point
7/16" Pro-Cut Jobbers Length Drill Bits, 135 Deg Split Point
5 SGS size U .368 solid carbide drills uncoated
new garr 7.3mm solid carbide drills.coated.
People who viewed this item also vieved
NEW WORLD PRODUCTS NEW INDEXABLE DRILL ID511875 WITH 10 FREE "W" STYLE INSERTS
NEW WORLD PRODUCTS NEW INDEXABLE DRILL ID516250 WITH 10 FREE "W" STYLE INSERTS
NEW WORLD PRODUCTS NEW INDEXABLE DRILL ID515625 WITH 10 FREE "W" STYLE INSERTS
19/64 High Speed Steel Drill Bit 6" Long Black (1)
1 3/16" Taper Length Drill - NEW!!
1 9/64" Taper Length Drill - Michigan Drill BO NEW!!
Farnell Corp Long Shank Masonry Drill 24" 3/8 10 mm Made in Germany
Weldon DB-96 Deburring Tool With Weldon Morse Taper 2 Shank complete - NEW
25 NEW LETTER DRILL BITS JOBBER LENGTH, SIZE ASSORTMENT, PTD USA, BRIGHT FINISH
Brown&Sharp Balanced Turning Tool Holder with DT Tool Holders Inserted Tool Bits
5 new ptd screw machine drills.all over 1/2".some with reduced shanks.
8 new ptd screw machine drills.all over 1/2".all with 1/2" reduced shanks.
NICE LOT OF 7 HSS MORSE TAPER TWIST DRILLS 11/16" TO 1" WITH 3MT CLEVELAND
LOT OF 7 HSS MORSE TAPER TWIST DRILLS 5/8" TO 13/16" WITH 2MT NATIONAL
LOT OF 4 HSS MORSE TAPER TWIST DRILLS 39/64" TO 1-3/16" WITH 2MT & 3MT MORSE
"PTD" Short Length Twist Drill Bits "5" Size Lot of 8 pcs
"PTD" Short Length Twist Drill Bits "6" Size, lot of 7 Pcs
"PTD" Short Length Twist Drill Bits "11" Size, Lot of 8 Pcs
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies