+ Post new Ad
USED UNIVERSAL ENGINEERING 1/2" EMH AUTO-SHANK END MILL HOLDER ADAPTER 46-539, US $45.00 – Picture 0
USED UNIVERSAL ENGINEERING 1/2" EMH AUTO-SHANK END MILL HOLDER ADAPTER 46-539, US $45.00 – Picture 0

Used Universal Engineering 1/2" Emh Auto-shank End Mill Holder Adapter 46-539

US $45.00

  • Fairfield, Iowa, United States
  • Jan 30th
Open on mobile:
QR code
Please note that the purchaser/buyer assumes all risk and liability associated with the eBay purchase and use of the item, and agrees not to hold ATI and its employees responsible for any resulting injury. We reserve the right to end any listing and update or change our policies without notice. This product listing is for a Universal Engineering EMH Auto-Shank End Mill Holder Adapter 46-539. The adapter has a hole diameter of 1/2" and an OAL of 7.00". The shank threads measure 1-7/8" x 12, and it is in good used condition. Our policies are as follows: Buyers are responsible for all shipping and handling charges, but we do offer combined shipping. Local pick-up is also available at the ATI Tooling facility in Fairfield, IA on weekdays from 10:00 AM to 2:00 PM (CST); please call ahead as a courtesy. Payment options include PayPal, Visa, Mastercard, American Express, and Discover. Iowa customers are subject to a 7% state sales tax. Our goal is to earn a 5-star rating in all categories. If we make a mistake, please let us know so we can fix it. Please don't leave negative or neutral feedback until you give us a chance to make it right.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Good used.”

Directions

Similar products from Adapters & Arbor Tool Holders

Morse Taper MT3 End Mill Holder 3/16 Inch

Morse Taper MT3 End Mill Holder 3/16 Inch

  • Chino, California, United States
  • Jan 30th
CAT 40 V-FLANGE TO MT3 MORSE TAPER ADAPTER (TANG END) NEW

CAT 40 V-FLANGE TO MT3 MORSE TAPER ADAPTER (TANG END) NEW

  • Chino, California, United States
  • Jan 30th
KITCHEN KNIFE--Pit Bull Excellent quality

KITCHEN KNIFE--Pit Bull Excellent quality

  • Bauxite, Arkansas, United States
  • Jan 30th
NEW BIG DAISHOWA TC 20 QUICK CHANGE COLLET HOLDER FOR 1/4" PIPE TAP

NEW BIG DAISHOWA TC 20 QUICK CHANGE COLLET HOLDER FOR 1/4" PIPE TAP

  • Cleveland, Ohio, United States
  • Jan 30th
BIG DAISHOWA DT 33 QUICK CHANGE HOLDER FOR 1/4" PIPE TAP

BIG DAISHOWA DT 33 QUICK CHANGE HOLDER FOR 1/4" PIPE TAP

  • Cleveland, Ohio, United States
  • Jan 30th
NEW BIG DAISHOWA TC 30 QUICK CHANGE COLLET HOLDER FOR 3/4" PIPE TAP

NEW BIG DAISHOWA TC 30 QUICK CHANGE COLLET HOLDER FOR 3/4" PIPE TAP

  • Cleveland, Ohio, United States
  • Jan 30th
BIG DAISHOWA DT 33 QUICK CHANGE HOLDER FOR 5/16" TAP

BIG DAISHOWA DT 33 QUICK CHANGE HOLDER FOR 5/16" TAP

  • Cleveland, Ohio, United States
  • Jan 30th
BIG DAISHOWA DT 33 QUICK CHANGE HOLDER FOR 9/16" TAP

BIG DAISHOWA DT 33 QUICK CHANGE HOLDER FOR 9/16" TAP

  • Cleveland, Ohio, United States
  • Jan 30th
BIG DAISHOWA DT 33 QUICK CHANGE HOLDER FOR 1/2" TAP

BIG DAISHOWA DT 33 QUICK CHANGE HOLDER FOR 1/2" TAP

  • Cleveland, Ohio, United States
  • Jan 30th
BIG DAISHOWA DT 33 QUICK CHANGE HOLDER FOR 3/4" TAP

BIG DAISHOWA DT 33 QUICK CHANGE HOLDER FOR 3/4" TAP

  • Cleveland, Ohio, United States
  • Jan 30th
1.75" Straight OD to #2 Morse Taper Adaptor x 7.25" OAL

1.75" Straight OD to #2 Morse Taper Adaptor x 7.25" OAL

  • Johnson City, New York, United States
  • Jan 30th
2.0" Straight OD to #4 Morse Taper Adaptor x 9.5" OAL

2.0" Straight OD to #4 Morse Taper Adaptor x 9.5" OAL

  • Johnson City, New York, United States
  • Jan 30th
Multi Point interchangeable Morse taper 2 Live lathe revolving centre milling

Multi Point interchangeable Morse taper 2 Live lathe revolving centre milling

  • Sheffield, United Kingdom
  • Jan 30th
Magnetic Drill Arbour R8 Shank for Bridgeport Machine Holder Mag Annular Cutter

Magnetic Drill Arbour R8 Shank for Bridgeport Machine Holder Mag Annular Cutter

  • Sheffield, United Kingdom
  • Jan 30th
(7) Sandvik C5 Whistle Notch Drill Adaptor CAPTO 391.2 Tool Holder Coromant Mill

(7) Sandvik C5 Whistle Notch Drill Adaptor CAPTO 391.2 Tool Holder Coromant Mill

  • Franksville, Wisconsin, United States
  • Jan 30th
KAISER KAB BT30 ADAPTER 10.329.866

KAISER KAB BT30 ADAPTER 10.329.866

  • Wadley, Alabama, United States
  • Jan 30th
NMTB50 MICROBORE C8 COLLET HOLDER with 4 Collets ,2 Trust Bearing, & washer-new

NMTB50 MICROBORE C8 COLLET HOLDER with 4 Collets ,2 Trust Bearing, & washer-new

  • Farmington, Michigan, United States
  • Jan 30th
NEW 3C Collet to Morse taper 3 lathe spindle adapter for southbend 9 or Atlas

NEW 3C Collet to Morse taper 3 lathe spindle adapter for southbend 9 or Atlas

  • Harvard, Massachusetts, United States
  • Jan 30th
HEAVY DUTY NMTB 40 FLY CUTTER 5/16" CAPACITY

HEAVY DUTY NMTB 40 FLY CUTTER 5/16" CAPACITY

  • Ellington, New York, United States
  • Jan 30th
LOT OF 3 MORSE TAPER TAPER SHANK END MILL HOLDERS

LOT OF 3 MORSE TAPER TAPER SHANK END MILL HOLDERS

  • Ellington, New York, United States
  • Jan 30th

People who viewed this item also vieved

Valenite V50CTS15040 Mill Machine Tool Holder 1.5 Arbor 4" Indexable Face Cutter

Valenite V50CTS15040 Mill Machine Tool Holder 1.5 Arbor 4" Indexable Face Cutter

  • Yorktown, Virginia, United States
  • May 25th
CAT 40 ER20 COLLET CHUCK 5.9 PROJECTION STK 9177

CAT 40 ER20 COLLET CHUCK 5.9 PROJECTION STK 9177

  • Wadley, Alabama, United States
  • May 25th
INDEXABLE CARBIDE LATHE TOOL HOLDER MTJNRS-12-3 W/ 3/4" SHANK

INDEXABLE CARBIDE LATHE TOOL HOLDER MTJNRS-12-3 W/ 3/4" SHANK

  • Chino, California, United States
  • May 27th
INDEXABLE CARBIDE LATHE TOOL HOLDER SCLCR-10-3 W/ 5/8" SHANK

INDEXABLE CARBIDE LATHE TOOL HOLDER SCLCR-10-3 W/ 5/8" SHANK

  • Chino, California, United States
  • May 27th
USED KENNAMETAL 1.00" SHANK DDQNL-164C TURNING TOOL HOLDER DN-43

USED KENNAMETAL 1.00" SHANK DDQNL-164C TURNING TOOL HOLDER DN-43

  • Federal Way, Washington, United States
  • May 28th
SECO SELF GRIP INDEXABLE PARTING TOOL W/ 3/4" HOLDER

SECO SELF GRIP INDEXABLE PARTING TOOL W/ 3/4" HOLDER

  • Ellington, New York, United States
  • May 28th
5 pieces Dodge 119404 Taper Lock Bushing Series 1310 1-3/8" Bore Dia W/Keyway

5 pieces Dodge 119404 Taper Lock Bushing Series 1310 1-3/8" Bore Dia W/Keyway

  • Marion, Indiana, United States
  • May 30th
(1516.) Replacement Bulb for Stinger Insect Killer UV40

(1516.) Replacement Bulb for Stinger Insect Killer UV40

  • Downers Grove, Illinois, United States
  • May 30th
PARLEC BT 40 1" END MILL HOLDER 4" PROJECTION STK 9047

PARLEC BT 40 1" END MILL HOLDER 4" PROJECTION STK 9047

  • Wadley, Alabama, United States
  • May 31st
PARLEC BT 40 7/8" END MILL HOLDER 3" PROJECTION STK 9046

PARLEC BT 40 7/8" END MILL HOLDER 3" PROJECTION STK 9046

  • Wadley, Alabama, United States
  • May 31st
ISCAR MSBNR 16 - 4 Self Grip Tool Holder Blade Carbide Inserts New Tools

ISCAR MSBNR 16 - 4 Self Grip Tool Holder Blade Carbide Inserts New Tools

  • Oxnard, California, United States
  • Jun 7th
ISCAR CSRPR 6 - 4 Lathe Tool Holder Carbide Inserts Turning New

ISCAR CSRPR 6 - 4 Lathe Tool Holder Carbide Inserts Turning New

  • Oxnard, California, United States
  • Jun 7th
2 Kennametal NMTB 30 Quick Change Tool Holders

2 Kennametal NMTB 30 Quick Change Tool Holders

  • Millstone Township, New Jersey, United States
  • Jun 9th
1/2 in Collet Chuck # 90397 Acura Flex Dble Angle Strght 3/4in dia Shank Holder

1/2 in Collet Chuck # 90397 Acura Flex Dble Angle Strght 3/4in dia Shank Holder

  • Palos Hills, Illinois, United States
  • Jun 9th
LYNDEX TAPER TOOL HOLDER #870-033 W/ 1/2 ' CHUCK

LYNDEX TAPER TOOL HOLDER #870-033 W/ 1/2 ' CHUCK

  • Elmont, New York, United States
  • Jun 9th
AccuPro Keyless Chuck, Hollow Shaft, for 1/2"

AccuPro Keyless Chuck, Hollow Shaft, for 1/2"

  • Hopkinsville, Kentucky, United States
  • Jun 9th
Sunnen 2H-P28 2250 WE Mandrel-Complete

Sunnen 2H-P28 2250 WE Mandrel-Complete

  • Plymouth, Indiana, United States
  • Oct 19th
Sunnen Honing Mandrel 3G P28 1125VB (LOC2318B)

Sunnen Honing Mandrel 3G P28 1125VB (LOC2318B)

  • Laingsburg, Michigan, United States
  • Oct 19th
Square 0.8KW Air Cooled Spindle Motor ER11 24000rpm 400Hz For CNC Milling Router

Square 0.8KW Air Cooled Spindle Motor ER11 24000rpm 400Hz For CNC Milling Router

  • Changzhou,Jiangsu, China
  • Nov 1st
37kw 50HP 300hz VFD inverter frequency converter 3ph 380VAC to 3ph 0-380V 75A

37kw 50HP 300hz VFD inverter frequency converter 3ph 380VAC to 3ph 0-380V 75A

  • DongGuan, China
  • Nov 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies