+ Post new Ad
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 0
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 1
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 2
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 3
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 4
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 5
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 6
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 7
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 0
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 1
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 2
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 3
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 4
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 5
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 6
V-BLOCKS, MATCHED PAIR, 1 1/2 IN. CAPACITY, INSPECTION, MACHINIST, US $400 – Picture 7

V-blocks, Matched Pair, 1 1/2 In. Capacity, Inspection, Machinist

US $400

  • Mansfield, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
This is a new matched pair of v-block with clanps.  They scale 2 3/4L X 2 1/2W X1 3/4H.  Holding capacity for the clamps is 1 1/2 inches.  I bought this set and never took them out of the box until today.  I cleaned the protective coating off to get the pictures.  There are absolutely no marks on them.  Not rust or tarnish.  If you have any questions, please ask before bidding.  Please check my other listings for more tools.  Thanks
Condition:
New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer UNKNOWN
Model UNKNOWN
Brand UNKNOWN

Directions

Similar products from Supporting Blocks & Sets

Machinists DS #3 Matched set Stubby Girder Hole Bars

Machinists DS #3 Matched set Stubby Girder Hole Bars

  • Lutz, Florida, United States
  • Jan 30th
Machinists DS #4 Beauty !!!!Low Rise Stepped angle Plate

Machinists DS #4 Beauty !!!!Low Rise Stepped angle Plate

  • Lutz, Florida, United States
  • Jan 30th
Machinists DS #5 Beauty !!!!Complex Double V Block heirloom Level Workmanship

Machinists DS #5 Beauty !!!!Complex Double V Block heirloom Level Workmanship

  • Lutz, Florida, United States
  • Jan 30th
Machinists DS #7 Extra Long Matched Set up Bars --set of 2

Machinists DS #7 Extra Long Matched Set up Bars --set of 2

  • Lutz, Florida, United States
  • Jan 30th
1-11/16 CAPACITY PRECISION V-BLOCK & CLAMP SET 2-3/8L X 2-3/8W X 2H (3402-0002)

1-11/16 CAPACITY PRECISION V-BLOCK & CLAMP SET 2-3/8L X 2-3/8W X 2H (3402-0002)

  • Chino, California, United States
  • Jan 30th
Adjustable Height V-Block

Adjustable Height V-Block

  • Bonne Terre, Missouri, United States
  • Jan 30th
Starrett #599 Adjustable Parallel Planer Shaper Gage Machinist Tool Box Milling

Starrett #599 Adjustable Parallel Planer Shaper Gage Machinist Tool Box Milling

  • Yorktown, Virginia, United States
  • Jan 30th
Atco Precision VB-34 4X3X3 Vee Block, 2-1/4" Capacity, NOS, USA Made

Atco Precision VB-34 4X3X3 Vee Block, 2-1/4" Capacity, NOS, USA Made

  • Attleboro, Massachusetts, United States
  • Jan 30th
Starrett #567 V Block & Clamp

Starrett #567 V Block & Clamp

  • Paris, Ohio, United States
  • Jan 30th
Haas CNC Lathe Tool Holder Blocks ST-10 SL-10 Wedge Square Tooling Screws Turret

Haas CNC Lathe Tool Holder Blocks ST-10 SL-10 Wedge Square Tooling Screws Turret

  • Bozeman, Montana, United States
  • Jan 30th
SPI - V-Blocks Type: V-Block Overall Length (mm): 91.28 3-19/32 " 91-290- 7

SPI - V-Blocks Type: V-Block Overall Length (mm): 91.28 3-19/32 " 91-290- 7

  • New Bedford, Massachusetts, United States
  • Jan 30th
BROWN & SHARPE MAGNETIC V BLOCK

BROWN & SHARPE MAGNETIC V BLOCK

  • Niles, Michigan, United States
  • Jan 30th
Pair 90Degree 3"x4"x3" U-Grind V-Block Kit

Pair 90Degree 3"x4"x3" U-Grind V-Block Kit

  • Newark, New Jersey, United States
  • Jan 30th
NICE !! PAIR OF V BLOCKS

NICE !! PAIR OF V BLOCKS

  • Norwalk, California, United States
  • Jan 30th
MACHINIST MILL LATHE 6" Micro Machinist Combination Square Level Ruler Mitutoyo

MACHINIST MILL LATHE 6" Micro Machinist Combination Square Level Ruler Mitutoyo

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Machinist Cat Holder speed Handle Gage Etc Pot Luck

MACHINIST LATHE MILL Lot of Machinist Cat Holder speed Handle Gage Etc Pot Luck

  • Morris Plains, New Jersey, United States
  • Jan 30th
Procheck 81 PC Rectangular Steel Gage Block Set w/Certs Grade B New In Box N.R.

Procheck 81 PC Rectangular Steel Gage Block Set w/Certs Grade B New In Box N.R.

  • White Lake, Michigan, United States
  • Jan 30th
***Moore 1-2-3 Blocks, Set of Three Setup Blocks***

***Moore 1-2-3 Blocks, Set of Three Setup Blocks***

  • Naperville, Illinois, United States
  • Jan 30th
vintage set of Teitzmann Machinist step blocks 20 pieces in original wood box

vintage set of Teitzmann Machinist step blocks 20 pieces in original wood box

  • Galt, California, United States
  • Jan 30th
Machinists DS #8 Beautiful Multi tapped angle plate

Machinists DS #8 Beautiful Multi tapped angle plate

  • Lutz, Florida, United States
  • Jan 30th

People who viewed this item also vieved

Used Carbide Tipped Dead Center With Morse Taper #6 For Grinder or Lathe

Used Carbide Tipped Dead Center With Morse Taper #6 For Grinder or Lathe

  • Bristol, Connecticut, United States
  • Jun 8th
New Carbide Tipped Dead Center With Morse Taper #6 For Grinder or Lathe, M6

New Carbide Tipped Dead Center With Morse Taper #6 For Grinder or Lathe, M6

  • Bristol, Connecticut, United States
  • Jun 8th
Lot of (3) New Brown and Sharpe Taper #5 Center for Grinding & Lathe Machines

Lot of (3) New Brown and Sharpe Taper #5 Center for Grinding & Lathe Machines

  • Bristol, Connecticut, United States
  • Jun 8th
Like New Vacmagic VM300 Vacuum Pallet Chuck Workholding Unit CNC

Like New Vacmagic VM300 Vacuum Pallet Chuck Workholding Unit CNC

  • Baldwin Park, California, United States
  • Jun 9th
Vacuum Hold Down Table W Rotary Stop Pneumatic Woodworking, Painting, Metalwork

Vacuum Hold Down Table W Rotary Stop Pneumatic Woodworking, Painting, Metalwork

  • DeKalb, Illinois, United States
  • Jun 9th
NICE! PRECISION 2" TOOLMAKERS VICE

NICE! PRECISION 2" TOOLMAKERS VICE

  • Ellington, New York, United States
  • Jun 9th
New and Used Rego-Fix Collets

New and Used Rego-Fix Collets

  • Big Lake, Minnesota, United States
  • Jun 9th
5C COLLETS HARDINGE NEWS NATIONAL ENCO FOWLER QUANTITY 28

5C COLLETS HARDINGE NEWS NATIONAL ENCO FOWLER QUANTITY 28

  • Naperville, Illinois, United States
  • Jun 9th
20 Pcs. Talon Precision CAT 40 ER 16 x 2.5" 15K RPM CNC Chuck Kit w/ Haas Stud

20 Pcs. Talon Precision CAT 40 ER 16 x 2.5" 15K RPM CNC Chuck Kit w/ Haas Stud

  • Hamden, Connecticut, United States
  • Jun 9th
364Kg Holding Capacity Quick Release Push Pull Type Toggle Clamp 36010M

364Kg Holding Capacity Quick Release Push Pull Type Toggle Clamp 36010M

  • Hong Kong, Hong Kong
  • Jun 9th
386Kg Holding Capacity Quick Release Push Pull Type Toggle Clamp 304E

386Kg Holding Capacity Quick Release Push Pull Type Toggle Clamp 304E

  • Hong Kong, Hong Kong
  • Jun 9th
454Kg Holding Capacity Quick Release Push Pull Type Toggle Clamp 303EM

454Kg Holding Capacity Quick Release Push Pull Type Toggle Clamp 303EM

  • Hong Kong, Hong Kong
  • Jun 9th
Kurt D60-4 Swivel Base D60, D675

Kurt D60-4 Swivel Base D60, D675

  • Caledonia, Wisconsin, United States
  • Jun 9th
Wilton 11126 Utility Bench Vise w/ Swivel Base 4-1/2" Jaw Width

Wilton 11126 Utility Bench Vise w/ Swivel Base 4-1/2" Jaw Width

  • Venice, Florida, United States
  • Jun 9th
Reed Vise No 34 Huge Stands 15" Tall With Bench & Rock Island Pounds On Casters

Reed Vise No 34 Huge Stands 15" Tall With Bench & Rock Island Pounds On Casters

  • Utica, New York, United States
  • Jun 9th
metal spinning mandrel,metal spinning form

metal spinning mandrel,metal spinning form

  • Bennington, New Hampshire, United States
  • Jun 9th
Jacobs 18N C&K Super Ball Bearing Drill Chuck - 1/8" to 3/4" Cap-4JT Mount NIB 1

Jacobs 18N C&K Super Ball Bearing Drill Chuck - 1/8" to 3/4" Cap-4JT Mount NIB 1

  • White Lake, Michigan, United States
  • Jun 9th
jacob chuck mode 1 B 3/8

jacob chuck mode 1 B 3/8

  • Adrian, Michigan, United States
  • Jun 9th
Design Originals-Flower Mandalas Coloring Book

Design Originals-Flower Mandalas Coloring Book

  • Hickory Hills, Illinois, United States
  • Nov 5th
Glimmer Glaze 1oz-Midnight Rendezvous

Glimmer Glaze 1oz-Midnight Rendezvous

  • Hickory Hills, Illinois, United States
  • Nov 5th
Lyndex-Nikken BT40 ER16 Right Angle Head Very Lightly Used

Lyndex-Nikken BT40 ER16 Right Angle Head Very Lightly Used

  • Cerritos, California, United States
  • Nov 5th
HA5C HAAS Indexing Head (New 2001)

HA5C HAAS Indexing Head (New 2001)

  • Worcester, Massachusetts, United States
  • Nov 18th
Cincinnati 2-18 Plain Horizontal Milling Machine

Cincinnati 2-18 Plain Horizontal Milling Machine

  • Johnson City, New York, United States
  • Nov 18th
ROTARY INDEX TABLE 12"

ROTARY INDEX TABLE 12"

  • Coffeyville, Kansas, United States
  • Nov 19th
Brown And Sharpe Toolmakers Clamp 599-754-20-1

Brown And Sharpe Toolmakers Clamp 599-754-20-1

  • Woodstock, Illinois, United States
  • Jun 19th
Hardinge 1" Hex 16C Collet used save $$$ NICE $$$ usa made the best

Hardinge 1" Hex 16C Collet used save $$$ NICE $$$ usa made the best

  • Pomona, California, United States
  • Jun 19th
CNC Spring collet Holder Spindle 1pc ER11 Metal Sleeve Shaft For metalworking

CNC Spring collet Holder Spindle 1pc ER11 Metal Sleeve Shaft For metalworking

  • suzhou, China
  • Jun 20th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies