+ Post new Ad
Valenite CAT50 Tapping Head, Valenite 8/A/4 TMS-311-51-50CAT, US $440 – Picture 0
Valenite CAT50 Tapping Head, Valenite 8/A/4 TMS-311-51-50CAT, US $440 – Picture 0

Valenite Cat50 Tapping Head, Valenite 8/a/4 Tms-311-51-50cat

US $440

  • Fremont, California, United States
  • Jun 12th
Open on mobile:
QR code
Valenite CAT50 Tension Compression Tapping Head with 3 tapping collets The engraving on the CAT50 holder is: Valenite  8/A/4 TMS-311-51-50CAT 3 tapping collet sizes are: 3/8 7/16 1/2 good used working condition One of the most common methods of tapping in use today on CNC machines is “rigid tapping” or “synchronous feed tapping.” A rigid tapping cycle synchronizes the machine spindle rotation and feed to match a specific thread pitch. Since the feed into the hole is synchronized, in theory a solid holder without any tension-compression can be used. However the problem with this is that in actual practice it is impossible for the machine to exactly match the pitch of the specific tap being used. There is always a slight discrepancy between what the machine is doing and the actual pitch of the tap. If a solid holder is used, this discrepancy is detrimental to tap life and thread quality because extra axial forces are exacted on the tap. If a tap holder with tension-compression float is used, tap life and thread quality can be dramatically improved, because these extra axial forces on the tap are eliminated COME AS SHOWN PLEASE Look at the pictures/scans THEN bid or buy accordingly IN your opinion. THANK YOU FOR LOOKING AND PLEASE CHECK OUT MY OTHER LISTINGS. TESTING, CHECKING, AND Local pick-up are highly encouraged. SHIPPING TO 48 LOWER STATE. INTERNATIONAL BUYER, PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCE FOR ITEMS PURCHASED. IMPORT DUTIES, TAXES AND OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST.THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING.

Directions

Similar products from CT Tapers & Holders

Valenite Refractometer PT-795 Japan

Valenite Refractometer PT-795 Japan

  • Bronson, Michigan, United States
  • Jun 12th
KENNAMETAL CAT50 1-1/4" END MILL HOLDER CV50 EM125400 STK2857

KENNAMETAL CAT50 1-1/4" END MILL HOLDER CV50 EM125400 STK2857

  • Wadley, Alabama, United States
  • Jun 12th
Collins 67848 CAT 50 Weldon Style Tool Holder 2" Bore 5.63" Projection Length

Collins 67848 CAT 50 Weldon Style Tool Holder 2" Bore 5.63" Projection Length

  • Middlebury, Indiana, United States
  • Jun 12th
Kennametal CV50SS150600 1-1/2" End Mill Holder CAT-50 V-Flange 6" PROJ CAT 50

Kennametal CV50SS150600 1-1/2" End Mill Holder CAT-50 V-Flange 6" PROJ CAT 50

  • Minneapolis, Minnesota, United States
  • Jun 12th
VALENITE CAT 50 TG100 COLLET CHUCK 5.1/4" PROJECTION STK 8302

VALENITE CAT 50 TG100 COLLET CHUCK 5.1/4" PROJECTION STK 8302

  • Wadley, Alabama, United States
  • Jun 12th
Nikken CAT 40 SK-25 120U Collet Chuck, 4 INCH EXTENDED **USED**

Nikken CAT 40 SK-25 120U Collet Chuck, 4 INCH EXTENDED **USED**

  • Coloma, Wisconsin, United States
  • Jun 12th
NMTB 40 KENNAMETAL TG 100 COLLET CHUCK QC40TG100255

NMTB 40 KENNAMETAL TG 100 COLLET CHUCK QC40TG100255

  • Holland, Ohio, United States
  • Jun 12th
VALENITE CAT40 CT40 3/8"& 3/16" TOOL HOLDER, with Pull Stud (U)

VALENITE CAT40 CT40 3/8"& 3/16" TOOL HOLDER, with Pull Stud (U)

  • Irvine, California, United States
  • Jun 12th
PARLEC CAT40 CT40 1/2"& 3/4" TOOL HOLDER, with Pull Stud (V)

PARLEC CAT40 CT40 1/2"& 3/4" TOOL HOLDER, with Pull Stud (V)

  • Irvine, California, United States
  • Jun 12th
KOMET CAT 40MV-ABS 50 / KOMET TRIGON V30 33810 Coolant Thru Indexable

KOMET CAT 40MV-ABS 50 / KOMET TRIGON V30 33810 Coolant Thru Indexable

  • Clinton Township, Michigan, United States
  • Jun 12th
Kennametal CV50EM150400 CAT 50 Tool Holder End Mill Adapter (BA)

Kennametal CV50EM150400 CAT 50 Tool Holder End Mill Adapter (BA)

  • Dallas, Texas, United States
  • Jun 12th
Nikken H30 Pull Stud Retention Knob New

Nikken H30 Pull Stud Retention Knob New

  • Lima, New York, United States
  • Jun 12th
Collins 67855 CAT 50 Weldon Style Tool Holder 1" Bore 6" Projection Length

Collins 67855 CAT 50 Weldon Style Tool Holder 1" Bore 6" Projection Length

  • Middlebury, Indiana, United States
  • Jun 12th
Collins 67856 CAT 50 Weldon Style Tool Holder 1-1/4" Bore 6" Projection Length

Collins 67856 CAT 50 Weldon Style Tool Holder 1-1/4" Bore 6" Projection Length

  • Middlebury, Indiana, United States
  • Jun 12th
Collins 67840 CAT 50 Weldon Style Tool Holder 3/8" Bore 2-1/2" Projection Length

Collins 67840 CAT 50 Weldon Style Tool Holder 3/8" Bore 2-1/2" Projection Length

  • Middlebury, Indiana, United States
  • Jun 12th
Collins 67839 CAT50 Weldon Style Tool Holder 5/16" Bore 2-1/2" Projection Length

Collins 67839 CAT50 Weldon Style Tool Holder 5/16" Bore 2-1/2" Projection Length

  • Middlebury, Indiana, United States
  • Jun 12th
Davis CAT V45 Weldon Style Tool Holder 1-1/2" Bore 4-1/2" Projection Length

Davis CAT V45 Weldon Style Tool Holder 1-1/2" Bore 4-1/2" Projection Length

  • Middlebury, Indiana, United States
  • Jun 12th
Kennametal CAT 50 Weldon Style Tool Holder 3/8" Bore 2-1/2" Projection Length

Kennametal CAT 50 Weldon Style Tool Holder 3/8" Bore 2-1/2" Projection Length

  • Middlebury, Indiana, United States
  • Jun 12th
Collins 67842 CAT 50 Weldon Style Tool Holder 5/8" Bore 3-3/4" Projection Length

Collins 67842 CAT 50 Weldon Style Tool Holder 5/8" Bore 3-3/4" Projection Length

  • Middlebury, Indiana, United States
  • Jun 12th
Fitz-Rite CAT 50 Weldon Style Tool Holder 3/8" Bore 4" Projection Length

Fitz-Rite CAT 50 Weldon Style Tool Holder 3/8" Bore 4" Projection Length

  • Middlebury, Indiana, United States
  • Jun 12th

People who viewed this item also vieved

Side saw mount mill arbor for 63mm discs & 2 HSS saw discs set

Side saw mount mill arbor for 63mm discs & 2 HSS saw discs set

  • Keratsini, Attiki, Greece
  • Jan 30th
NICE! HEAVY DUTY NO 5 MT MORSE TAPER TO 5 MT EXTENSION

NICE! HEAVY DUTY NO 5 MT MORSE TAPER TO 5 MT EXTENSION

  • La Puente, California, United States
  • Jan 30th
DEVLIEG NMTB50 BORING RING ADAPTER JMC50FC-ADE-1412 NMTB 50 LOT C5384

DEVLIEG NMTB50 BORING RING ADAPTER JMC50FC-ADE-1412 NMTB 50 LOT C5384

  • Dayton, Ohio, United States
  • Jan 30th
DEVLIEG NMTB50 BORING RING ADAPTER 50FC-ADE-1412-20-MTP NMTB 50 LOT C5386

DEVLIEG NMTB50 BORING RING ADAPTER 50FC-ADE-1412-20-MTP NMTB 50 LOT C5386

  • Dayton, Ohio, United States
  • Jan 30th
Nikken BT45-WE 3/8-75 End Mill Holder - Stock # 0920

Nikken BT45-WE 3/8-75 End Mill Holder - Stock # 0920

  • Dundee, Florida, United States
  • Jan 30th
Used COMMAND BT40 Taper Shell Mill / Face Mill Holder 1" DIAMETER

Used COMMAND BT40 Taper Shell Mill / Face Mill Holder 1" DIAMETER

  • Santa Clara, California, United States
  • Jan 30th
NEW SIG 547841254 MECHANICAL 5/8 IN BUSHING D273273

NEW SIG 547841254 MECHANICAL 5/8 IN BUSHING D273273

  • Delta, Ohio, United States
  • Jan 30th
2517 x 1-7/16" DODGE TAPER LOCK BUSHING NEW

2517 x 1-7/16" DODGE TAPER LOCK BUSHING NEW

  • Jasper, Texas, United States
  • Jan 30th
Replacement 1/2" keyless chuck - professional - Aviation

Replacement 1/2" keyless chuck - professional - Aviation

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck Arbor No AO403 #4 M.T. (Morse Taper) with #3 J.T. (Jacobs Taper)

Jacobs Chuck Arbor No AO403 #4 M.T. (Morse Taper) with #3 J.T. (Jacobs Taper)

  • San Diego, California, United States
  • Jan 30th
NEW! SANDVIK 266RFGZ2525-16 CoroThread 266 shank tool for thread turning

NEW! SANDVIK 266RFGZ2525-16 CoroThread 266 shank tool for thread turning

  • Solon, Ohio, United States
  • Jan 30th
NEW! SANDVIK COROMANT R166.0FG-205D T-Max U-Lock shank tool for thread turning

NEW! SANDVIK COROMANT R166.0FG-205D T-Max U-Lock shank tool for thread turning

  • Solon, Ohio, United States
  • Jan 30th
SUNNEN special M27J87X abrasive set (400 grit)--4 stone set, no guides

SUNNEN special M27J87X abrasive set (400 grit)--4 stone set, no guides

  • Chatham, Ontario, Canada
  • Jan 30th
SUNNEN CK422A one way roller, nt Kwik-way, Van Norman---value $75

SUNNEN CK422A one way roller, nt Kwik-way, Van Norman---value $75

  • Chatham, Ontario, Canada
  • Jan 30th
Iscar Polnr 12-3; Iscar Polnr 15-3 Turning Tool

Iscar Polnr 12-3; Iscar Polnr 15-3 Turning Tool

  • Townville, South Carolina, United States
  • Jan 30th
LATHE INDEXABLE CUTTING TOOL HOLDER CTGPR-24-5 ADAMAS 1-1/2" x 1-1/2" SHANK

LATHE INDEXABLE CUTTING TOOL HOLDER CTGPR-24-5 ADAMAS 1-1/2" x 1-1/2" SHANK

  • Punta Gorda, Florida, United States
  • Jan 30th
DA100 COLLET EXTENSION WITH 1" DIAMETER SHANK & ( 6 ) DA 100 COLLETS LOT C10378

DA100 COLLET EXTENSION WITH 1" DIAMETER SHANK & ( 6 ) DA 100 COLLETS LOT C10378

  • Dayton, Ohio, United States
  • Jan 30th
QUICK CHANGE TOOL / TAP HOLDER- LOT OF 8, TM SMITH TOOL 311-51-716

QUICK CHANGE TOOL / TAP HOLDER- LOT OF 8, TM SMITH TOOL 311-51-716

  • Stoughton, Wisconsin, United States
  • Jan 30th
Studer 2012.740 Hydrostatic High Pressure Spindle RH

Studer 2012.740 Hydrostatic High Pressure Spindle RH

  • Peoria, Illinois, United States
  • Jan 30th
Tapmatic 30X Reversible Tapping Attachment

Tapmatic 30X Reversible Tapping Attachment

  • Johnson City, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies