+ Post new Ad
Valenite GTE, BT40 TG100 Collet Chucks, 1 Lot of 4. w/ Collet Set., US $130 – Picture 0
Valenite GTE, BT40 TG100 Collet Chucks, 1 Lot of 4. w/ Collet Set., US $130 – Picture 0

Valenite Gte, Bt40 Tg100 Collet Chucks, 1 Lot Of 4. W/ Collet Set.

US $130

  • Sandy, Oregon, United States
  • May 27th
Open on mobile:
QR code
These 4 Collet Chucks are in great shape... Use these to hold your Drills, Reamers and End Mills with shanks up to 1" in Diameter... Cleaned, lightly oiled and ready to assemble and use... These four Collet Chucks also come with a set [38pcs.] of Collets: 1ea sizes 3/32" thru 1" by 1/32". Plus an additional Collet for nominals: 1/8"; 1/4; 3/8"; 1/2"; 5/8"; 3/4"; 7/8", 1". These four Collet Chucks also come with their original backup screws [See photo 5] which were modified as follows: drilled, tapped & chamfered 3/8"-24. This allows the use of a smaller extension screw [assortment of 6 included w/jam nuts] to reach into the recess at the top of the collet giving support to smaller shanked tools should a person choose to use this feature. * Slight Damage. See photo's 3 & 4.  The photo shows a scuff on the face off the collet nut which was carefully cleaned up by flat sanding on a Granite Plate. The photo also shows 2 lines [only] of corrosion in the collet pocket which would have corresponded to the splits in the collet of an assembly that was left too long without cleaning. These flaws are unique to this 1 collet chuck and in my experience would not represent any issue with respect to the performance of this item. 

Directions

Similar products from Collet Chucks & Sets

"EarthArt International Cling Stamp 4.25""X7""-Dragon"

"EarthArt International Cling Stamp 4.25""X7""-Dragon"

  • Hickory Hills, Illinois, United States
  • May 27th
"Tulip Knina Knitting Needles 16""-Size 13/9mm"

"Tulip Knina Knitting Needles 16""-Size 13/9mm"

  • Hickory Hills, Illinois, United States
  • May 27th
38 Pc. Talon CAT 40 ER 16 & ER 32 15K RPM CNC Chuck,Collet Set,Haas Stud Kit

38 Pc. Talon CAT 40 ER 16 & ER 32 15K RPM CNC Chuck,Collet Set,Haas Stud Kit

  • Hamden, Connecticut, United States
  • May 27th
JACOBS RUBBER FLEX COLLET CHUCK D1-6 LATHE MOUNT 1/16" - 1-3/8" COLLETS

JACOBS RUBBER FLEX COLLET CHUCK D1-6 LATHE MOUNT 1/16" - 1-3/8" COLLETS

  • Highland, New York, United States
  • May 27th
HARDINGE 2J COLLET CHUCK D1-6 MOUNT W/COLLETS 1/4" - 1"

HARDINGE 2J COLLET CHUCK D1-6 MOUNT W/COLLETS 1/4" - 1"

  • Highland, New York, United States
  • May 27th
D1-4 5C Collet Chuck

D1-4 5C Collet Chuck

  • Garden City, Idaho, United States
  • May 27th
Collet Chuck for Mori Seiki With 3 Collets & Back Plate

Collet Chuck for Mori Seiki With 3 Collets & Back Plate

  • Garden City, Idaho, United States
  • May 27th
Royal Products Grippex model 20L bar puller

Royal Products Grippex model 20L bar puller

  • Nipomo, California, United States
  • May 27th
COLLET HOLDER # 1020 FOR UNIMAT LATHE

COLLET HOLDER # 1020 FOR UNIMAT LATHE

  • Peoria, Arizona, United States
  • May 27th
Valenite GTE, BT40 200DA Collet Chucks, 1 Lot of 4.

Valenite GTE, BT40 200DA Collet Chucks, 1 Lot of 4.

  • Sandy, Oregon, United States
  • May 27th
Pneumatic Universal Chuck Assembly Pencil Grinder 3/32" Capacity Used Wrench

Pneumatic Universal Chuck Assembly Pencil Grinder 3/32" Capacity Used Wrench

  • Mantua, Ohio, United States
  • May 27th
21 Pc. Techniks HSK 63F ER 40 CNC Routers Tooling Kit-Collet Chuck,Collet,Wrench

21 Pc. Techniks HSK 63F ER 40 CNC Routers Tooling Kit-Collet Chuck,Collet,Wrench

  • Hamden, Connecticut, United States
  • May 27th
25 Pc. Techniks HSK 63F SYOZ 25 CNC Routers Tooling Kit-Collet Chucks & Collets

25 Pc. Techniks HSK 63F SYOZ 25 CNC Routers Tooling Kit-Collet Chucks & Collets

  • Hamden, Connecticut, United States
  • May 27th
17 Pc. Techniks HSK 63F SYOZ 25 CNC Routers Tooling Kit-Collet Chucks & Collets

17 Pc. Techniks HSK 63F SYOZ 25 CNC Routers Tooling Kit-Collet Chucks & Collets

  • Hamden, Connecticut, United States
  • May 27th
30 Pc. Techniks ISO 20 ER 16 CNC Haas Office Mill Kit-Chuck,Collet Set,Pull Stud

30 Pc. Techniks ISO 20 ER 16 CNC Haas Office Mill Kit-Chuck,Collet Set,Pull Stud

  • Hamden, Connecticut, United States
  • May 27th
Collet Chuck 5mm used

Collet Chuck 5mm used

  • Cheboksary, RU, Russian Federation
  • May 27th
!REDUCED! 3J Collet Nose-ID Threads-62 x 1.5mm for 4NE Hitachi CNC Lathe Collets

!REDUCED! 3J Collet Nose-ID Threads-62 x 1.5mm for 4NE Hitachi CNC Lathe Collets

  • Hallandale, Florida, United States
  • May 27th
100MM DIAMETER ER-40 COLLET CHUCK (3901-5036)

100MM DIAMETER ER-40 COLLET CHUCK (3901-5036)

  • Chino, California, United States
  • May 27th
132MM DIAMETER ER-40 COLLET CHUCK (3901-5038)

132MM DIAMETER ER-40 COLLET CHUCK (3901-5038)

  • Chino, California, United States
  • May 27th
5C Collet Chuck. and Collet set. Emcomat.

5C Collet Chuck. and Collet set. Emcomat.

  • Burlington, Ontario, Canada
  • May 27th

People who viewed this item also vieved

ER16 PRECISION COLLET 9/32" CHRAFTSMAN IND.

ER16 PRECISION COLLET 9/32" CHRAFTSMAN IND.

  • Meridian, Idaho, United States
  • Feb 14th
NICE LOT HARDINGE 5C COLLETS ALL POPULAR SIZES PLUS A CENTER

NICE LOT HARDINGE 5C COLLETS ALL POPULAR SIZES PLUS A CENTER

  • Franklinville, New York, United States
  • Feb 14th
5C COLLET STOP

5C COLLET STOP

  • West Point, Pennsylvania, United States
  • Feb 14th
NICE! 4" x 6" TILTING ADJUSTABLE ANGLE MACHINISTS SINE PLATE

NICE! 4" x 6" TILTING ADJUSTABLE ANGLE MACHINISTS SINE PLATE

  • La Puente, California, United States
  • Feb 18th
Generic 6" x 1" x 1" Sine Bar

Generic 6" x 1" x 1" Sine Bar

  • Garden City, Idaho, United States
  • Feb 18th
LOT OF TWO 1/8" THREAD FACE PLATE(S) MACHINIST JEWELERS WATCH MAKERS LATHE TOOLS

LOT OF TWO 1/8" THREAD FACE PLATE(S) MACHINIST JEWELERS WATCH MAKERS LATHE TOOLS

  • Lake Hiawatha, New Jersey, United States
  • Feb 18th
DE-STA-CO 305 toggle clamps 10 Pcs in all

DE-STA-CO 305 toggle clamps 10 Pcs in all

  • Montebello, California, United States
  • Feb 24th
DE-STA-CO 609 hold down side clamps 6pcs all ok

DE-STA-CO 609 hold down side clamps 6pcs all ok

  • Montebello, California, United States
  • Feb 24th
DE-STA-CO 609 hold down side clamps 6pcs

DE-STA-CO 609 hold down side clamps 6pcs

  • Montebello, California, United States
  • Feb 24th
Kurt 3620V | Kurt 6" Modular Vise | 6" 3620V Versatile Short Vise | New |74b|

Kurt 3620V | Kurt 6" Modular Vise | 6" 3620V Versatile Short Vise | New |74b|

  • Maryland Heights, Missouri, United States
  • Feb 24th
KURT ANGLOCK 6" MILLING MACHINE VISE D675

KURT ANGLOCK 6" MILLING MACHINE VISE D675

  • Piqua, Ohio, United States
  • Feb 24th
VINTAGE INDUSTRIAL MACHINIST TOOL VISE NEEDS HELP UNUSUAL

VINTAGE INDUSTRIAL MACHINIST TOOL VISE NEEDS HELP UNUSUAL

  • Waterbury, Connecticut, United States
  • Feb 24th
Woodwoker's VISE MANUFACTURED BY FOOTPRINT NO.34 SHEFFIELD England

Woodwoker's VISE MANUFACTURED BY FOOTPRINT NO.34 SHEFFIELD England

  • Richmond Hill, Ontario, Canada
  • Feb 27th
Vintage Carpainter's VISE Record No. 50 made in England

Vintage Carpainter's VISE Record No. 50 made in England

  • Richmond Hill, Ontario, Canada
  • Feb 27th
2# LIVE CENTER NO. 4 MORSE TAPER LATHE HOMESHOP MACHINIST SOUTHBEND

2# LIVE CENTER NO. 4 MORSE TAPER LATHE HOMESHOP MACHINIST SOUTHBEND

  • Sioux Falls, South Dakota, United States
  • Feb 27th
craftsman 6" 3 Jaw Chuck With 1-1/2-8" Back Plate for South Metal Lathe Logan

craftsman 6" 3 Jaw Chuck With 1-1/2-8" Back Plate for South Metal Lathe Logan

  • Bear, Delaware, United States
  • Feb 27th
BISON 15-3/4" Diameter, 3 Jaw Chuck, 5" Hole, Flat Back - Made in Poland

BISON 15-3/4" Diameter, 3 Jaw Chuck, 5" Hole, Flat Back - Made in Poland

  • Chatsworth, California, United States
  • Feb 27th
Runnig machine

Runnig machine

  • New York, New York, United States
  • Feb 27th
Original South Bend Lathe Model 9 A Large Dial Cross feed Screw

Original South Bend Lathe Model 9 A Large Dial Cross feed Screw

  • Haverhill, Massachusetts, United States
  • Mar 29th
Atlas Craftsman 10" Metal Lathe Follow Follower Rest Assembly 9-396

Atlas Craftsman 10" Metal Lathe Follow Follower Rest Assembly 9-396

  • Waterbury, Connecticut, United States
  • Mar 29th
SPI Adjustable Parallel 6 Piece Set Minimum Measurement: 3/8" Maximum: 2-1/4"

SPI Adjustable Parallel 6 Piece Set Minimum Measurement: 3/8" Maximum: 2-1/4"

  • Milwaukee, Wisconsin, United States
  • Mar 29th
machinist toolmaker grinding set up pair of v'blocks 2x2.5x2.75 with clamps

machinist toolmaker grinding set up pair of v'blocks 2x2.5x2.75 with clamps

  • Hadley, Pennsylvania, United States
  • May 25th
MACHINIST penn tool co. FISHTAIL V-BLOCK 3.5x1 7/8x1 7/8 with clamp

MACHINIST penn tool co. FISHTAIL V-BLOCK 3.5x1 7/8x1 7/8 with clamp

  • Hadley, Pennsylvania, United States
  • May 25th
Magnetic Machinist V Block 231

Magnetic Machinist V Block 231

  • Spencer, Indiana, United States
  • May 25th
MINT WALTER DAPRA RTS320G PRECISION 12.5" TILT ROTARY INDEX TABLE ZERO BACKLASH

MINT WALTER DAPRA RTS320G PRECISION 12.5" TILT ROTARY INDEX TABLE ZERO BACKLASH

  • Richmond Hill, Ontario, Canada
  • May 25th
10" ROTARY TABLE "Made in Japan"

10" ROTARY TABLE "Made in Japan"

  • Edison, New Jersey, United States
  • May 25th
CLEAN! L-W CHUCK 11" INDEXING DIVIDING HEAD

CLEAN! L-W CHUCK 11" INDEXING DIVIDING HEAD

  • Covina, California, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies