+ Post new Ad
VALENITE SHELL MILL HOLDER BT30 TAPER FANUC ROBODRILL, US $45.00 – Picture 0
VALENITE SHELL MILL HOLDER BT30 TAPER FANUC ROBODRILL, US $45.00 – Picture 1
VALENITE SHELL MILL HOLDER BT30 TAPER FANUC ROBODRILL, US $45.00 – Picture 2
VALENITE SHELL MILL HOLDER BT30 TAPER FANUC ROBODRILL, US $45.00 – Picture 3
VALENITE SHELL MILL HOLDER BT30 TAPER FANUC ROBODRILL, US $45.00 – Picture 0
VALENITE SHELL MILL HOLDER BT30 TAPER FANUC ROBODRILL, US $45.00 – Picture 1
VALENITE SHELL MILL HOLDER BT30 TAPER FANUC ROBODRILL, US $45.00 – Picture 2
VALENITE SHELL MILL HOLDER BT30 TAPER FANUC ROBODRILL, US $45.00 – Picture 3

Valenite Shell Mill Holder Bt30 Taper Fanuc Robodrill

US $45.00

  • Mocksville, North Carolina, United States
  • Mar 8th
Open on mobile:
QR code
 Here is a Velenite brand BT 30 taper shell mill holder marked BT30-S100-118 .  Pilot is 1" and the removable drive dogs are 3/8 wide.  The surfaces are stained but feel smooth and should be fine with some light stoning.  The drive lug pockets each have a corner chipped.  There are some galling marks on the taper surface, they don't seem too bad.  The majority of the taper surface is smooth and free of damage.  I see no reason why this holder wouldn't perform well in your 30 taper machine.

Directions

Similar products from BT Tool Holders

TG100 BT40 40 TAPER MACHINE CNC MILL VMC END MILL HOLDER 2-5/8" PROJ.

TG100 BT40 40 TAPER MACHINE CNC MILL VMC END MILL HOLDER 2-5/8" PROJ.

  • Chino, California, United States
  • Mar 9th
LYNDEX TG100 BT40 40 TAPER COLLET CHUCK CNC MILL END MILL HOLDER 3-1/4" PROJ.

LYNDEX TG100 BT40 40 TAPER COLLET CHUCK CNC MILL END MILL HOLDER 3-1/4" PROJ.

  • Chino, California, United States
  • Mar 9th
FLY CUTTER & misc machinist toolmakers tools id.40

FLY CUTTER & misc machinist toolmakers tools id.40

  • Reynoldsburg, Ohio, United States
  • Mar 9th
BT50 HOLDER- Milling Chuck with collets - BT50-ART32mm dia X 105mm projection

BT50 HOLDER- Milling Chuck with collets - BT50-ART32mm dia X 105mm projection

  • Farmington, Michigan, United States
  • Mar 9th
(4) Erickson BTC Bridgeport 2 taper Collets (1) .75 Dia (2) .375 Dia (1) .625 Di

(4) Erickson BTC Bridgeport 2 taper Collets (1) .75 Dia (2) .375 Dia (1) .625 Di

  • Schwenksville, Pennsylvania, United States
  • Mar 9th
Collis BT30 1.0" Shell Mill Arbor

Collis BT30 1.0" Shell Mill Arbor

  • Johnson City, New York, United States
  • Mar 9th
Heidenhahn scales for Fadal mills

Heidenhahn scales for Fadal mills

  • Livonia, Michigan, United States
  • Mar 9th
1-1/4" CAPACITY ENDMILL REAMER TOOL HOLDER 40 TAPER FOR CNC / MILLS

1-1/4" CAPACITY ENDMILL REAMER TOOL HOLDER 40 TAPER FOR CNC / MILLS

  • La Puente, California, United States
  • Mar 8th
TECNARA 400-310-4 40 TAPER CNC TOOL HOLDER 1-1/4" CAPACITY

TECNARA 400-310-4 40 TAPER CNC TOOL HOLDER 1-1/4" CAPACITY

  • La Puente, California, United States
  • Mar 8th
Sixteen Bt40 Retention Knobs Pull Studs B40-9000S

Sixteen Bt40 Retention Knobs Pull Studs B40-9000S

  • Valencia, California, United States
  • Mar 8th
SANDVIK INDEXABLE SHELL MILL WITH LYNDEX HOLDER BT30 TAPER FANUC ROBODRILL

SANDVIK INDEXABLE SHELL MILL WITH LYNDEX HOLDER BT30 TAPER FANUC ROBODRILL

  • Mocksville, North Carolina, United States
  • Mar 8th
ALBRECHT KEYLESS DRILL CHUCK WITH PARLEC HOLDER BT30 TAPER FANUC ROBODRILL

ALBRECHT KEYLESS DRILL CHUCK WITH PARLEC HOLDER BT30 TAPER FANUC ROBODRILL

  • Mocksville, North Carolina, United States
  • Mar 8th
DAISHOWA SEIKI BIG 35 PCS

DAISHOWA SEIKI BIG 35 PCS

  • Ashdod, Israel
  • Mar 8th
LYNDEX BT40 JACOBS TAPER HOLDER WITH NEW 3/4" CAPACITY DRILL CHUCK LOT C12003

LYNDEX BT40 JACOBS TAPER HOLDER WITH NEW 3/4" CAPACITY DRILL CHUCK LOT C12003

  • Dayton, Ohio, United States
  • Mar 8th
LYNDEX BT40 JACOBS TAPER HOLDER WITH NEW 3/4" CAPACITY DRILL CHUCK LOT C12002

LYNDEX BT40 JACOBS TAPER HOLDER WITH NEW 3/4" CAPACITY DRILL CHUCK LOT C12002

  • Dayton, Ohio, United States
  • Mar 8th
NIKKEN BT40 1" DIAMETER ENDMILL HOLDER BT 40 END MILL LOT C12001

NIKKEN BT40 1" DIAMETER ENDMILL HOLDER BT 40 END MILL LOT C12001

  • Dayton, Ohio, United States
  • Mar 8th
VALENITE BT40 1-1/4" DIAMETER ENDMILL HOLDER BT 40 END MILL LOT C12000

VALENITE BT40 1-1/4" DIAMETER ENDMILL HOLDER BT 40 END MILL LOT C12000

  • Dayton, Ohio, United States
  • Mar 8th
16 PC SET BT40 ER11 (3) COLLET CHUCKS AND 13 NEW ER 11 COLLETS BT 40 LOT C10840

16 PC SET BT40 ER11 (3) COLLET CHUCKS AND 13 NEW ER 11 COLLETS BT 40 LOT C10840

  • Dayton, Ohio, United States
  • Mar 7th
New CAT40 1.0" Shell Mill Arbor

New CAT40 1.0" Shell Mill Arbor

  • Johnson City, New York, United States
  • Mar 7th
Metaltech, Pull Stud, BT40, 45 degrees, Thread M16, Length 60mm, Shaf 10mm, New

Metaltech, Pull Stud, BT40, 45 degrees, Thread M16, Length 60mm, Shaf 10mm, New

  • Miami, Florida, United States
  • Mar 7th

People who viewed this item also vieved

Kennametal NEL 244D Lathe Turning Tool Holder 1-1/2" Shank

Kennametal NEL 244D Lathe Turning Tool Holder 1-1/2" Shank

  • Johnson City, New York, United States
  • Jan 30th
NEW TOOLMEX 3/4" SHANK SI-MWLNL 12-4 BORING BAR 6-765-124L (WNMG-432)

NEW TOOLMEX 3/4" SHANK SI-MWLNL 12-4 BORING BAR 6-765-124L (WNMG-432)

  • Fairfield, Iowa, United States
  • Jan 30th
Davis Cat50 Drawbar Pressure Gage pull-in Force CNC Milling Spindle Clamp Cat 50

Davis Cat50 Drawbar Pressure Gage pull-in Force CNC Milling Spindle Clamp Cat 50

  • Hopkins, Minnesota, United States
  • Jan 30th
KOMET 'BIG" OIL HOLE HOLDER WITH KOMET A522095 ABS 50 ADAPTER, Cat 50, CNC VMC

KOMET 'BIG" OIL HOLE HOLDER WITH KOMET A522095 ABS 50 ADAPTER, Cat 50, CNC VMC

  • Hopkins, Minnesota, United States
  • Jan 30th
Sandvik E12-A16-SS-065 adaptor +Sandvik 316-12FM650-12010L solid carbide milling

Sandvik E12-A16-SS-065 adaptor +Sandvik 316-12FM650-12010L solid carbide milling

  • Denizli, default, Turkey
  • Jan 30th
Sandvik E12-A16-SS-065 adaptor +Sandvik 316-12FM650-12000L solid carbide milling

Sandvik E12-A16-SS-065 adaptor +Sandvik 316-12FM650-12000L solid carbide milling

  • Denizli, default, Turkey
  • Jan 30th
VARIOUS Kennametal CLAMP SCREWS AND OTHER KENNAMETAL PARTS STC

VARIOUS Kennametal CLAMP SCREWS AND OTHER KENNAMETAL PARTS STC

  • Naperville, Illinois, United States
  • Jan 30th
Carboloy? MTVOR 12-3 Tool Holder 3/4" Shank

Carboloy? MTVOR 12-3 Tool Holder 3/4" Shank

  • Garden City, Idaho, United States
  • Jan 30th
SMALL BENCH MOUNT ARBOR NEW OLD STOCK ANTIQUE STYLE

SMALL BENCH MOUNT ARBOR NEW OLD STOCK ANTIQUE STYLE

  • Dothan, Alabama, United States
  • Feb 13th
MT5 to MT3 Morse Taper Adapter Drill Sleeve No. 5 to No. 3

MT5 to MT3 Morse Taper Adapter Drill Sleeve No. 5 to No. 3

  • Bronx, New York, United States
  • Feb 13th
A box of 32 Georg Fischer pipe parts

A box of 32 Georg Fischer pipe parts

  • Vista, California, United States
  • Feb 14th
HARD-PRESS-HEADED DRILL-BUSHINGS-FIT-FOR-MACHINIST-TOOL-DIE-JIG FIXTURE.

HARD-PRESS-HEADED DRILL-BUSHINGS-FIT-FOR-MACHINIST-TOOL-DIE-JIG FIXTURE.

  • Portland, Oregon, United States
  • Feb 14th
1/2" and 3/8" Jacobs drill chucks with CAT40 shanks, model 14N and 11N, NR

1/2" and 3/8" Jacobs drill chucks with CAT40 shanks, model 14N and 11N, NR

  • Phoenix, Arizona, United States
  • Mar 3rd
Jacobs 14N Super Drill Chuck MT4 Metal Lathe Machinist Tool Southbend Clausing L

Jacobs 14N Super Drill Chuck MT4 Metal Lathe Machinist Tool Southbend Clausing L

  • Yorktown, Virginia, United States
  • Mar 3rd
Aloris DA41 2" Boring Bar Holder Quick Change

Aloris DA41 2" Boring Bar Holder Quick Change

  • Wylie, Texas, United States
  • Mar 9th
Kennametal KM32 Quick Change Cuter Unit

Kennametal KM32 Quick Change Cuter Unit

  • Brooksville, Florida, United States
  • Mar 9th
Bryant Motorized Spindle Model 924-C

Bryant Motorized Spindle Model 924-C

  • Oxford, Connecticut, United States
  • May 24th
Jacobs Spindle Nose metal lathe chuck model no 91-A6 5/8" to 3/4"

Jacobs Spindle Nose metal lathe chuck model no 91-A6 5/8" to 3/4"

  • Chehalis, Washington, United States
  • May 24th
SUNNEN AN Hone w/ Model AN-280 Support.

SUNNEN AN Hone w/ Model AN-280 Support.

  • Oregon, Ohio, United States
  • May 25th
SUNNEN 4UL-906 MANDREL & TRUING SLEEVE ST-900 ST-906 AUTOMOTIVE MACHINIST TOOL

SUNNEN 4UL-906 MANDREL & TRUING SLEEVE ST-900 ST-906 AUTOMOTIVE MACHINIST TOOL

  • Suffern, New York, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies