Valleylab Force 2 Electrosurgical Unit

US $2,900.00

Hallandale, Florida, United States
Mar 10th

Open on mobile:
QR code

VALLEYLAB FORCE 2 ELECTROSURGICAL UNIT The Force 2 electrosurgical unit from Valleylab provides cutting and coagulation in monopolar or bipolar outputs. Force 2s have audible and visual alarms, including REM™ Fault Indicator. The REM™ (Return Electrode Monitoring) is standard. 300 watts is available for output in the cut setting. A monopolar foot switch is included, a bipolar foot switch is optional as is a rolling cart. FEATURES: BLENDED CUT MODES Provide flexibility through varying degrees of hemostasis. Choose one of three preset modes. SIMULTANEOUS INDEPENDENT COAGULATION Permits two surgeons to fulgurate from a single generator, for added convenience and efficacy. Accessories are activated only when keyed, reducing the potential for injury caused by inadvertent activation. LOW VOLTAGE COAGULATION Ensures controlled, precise desiccation with less destruction of peripheral tissue, making the Force? 2 generator ideal for laparoscopic procedures. REM™ SAFETY Is guaranteed with Valleylab’s patented adaptive REM? system, which continually monitors patient impedance levels. If a fault in the patient/return electrode contact is detected, the REM? system automatically deactivates the generator virtually eliminating the risk of burns under the return electrode. Valleylab REM? safety has been proven in more than 100 million surgical procedures worldwide. SPECIFICATIONS WEIGHT AND DIMENSIONS •Height: 8 in. (20 cm) •Width: 13 in. (33 cm) •Length: 21 in. (53 cm) •Weight: 23 lbs. (10.4 kg) OUTPUT WAVEFORMS •Cut: 510 kHz sinusoid •Blend 1: 510 kHz sinusoidal bursts at 50% duty cycle recurring at 31 kHz •Blend 2: 510 kHz sinusoidal bursts at 37.5% duty cycle recurring at 31 kHz •Blend 3: 510 kHz sinusoidal bursts at 25% duty cycle recurring at 31 kHz •Coag: 510 kHz damped sinusoidal bursts with a repetition frequency of 31 kHz Low Voltage 510 kHz sinusoidal bursts at 25% •Coag: duty cycle recurring at 31 kHz •Bipolar: 510 kHz sinusoid Output power changes by less than 5% or 5 watts, whichever is greater, as the line voltage varies from 85-135 volts (into a 300 ohm load). LOW FREQUENCY LEAKAGE (50-60 Hz) Source current, patient leads, all outputs tied together. •Normal polarity, intact chassis ground < 10 µA •Normal polarity, ground open •Reverse polarity, ground open •Sink current, 140V applied, all inputs HIGH FREQUENCYLEAKAGE Less than 150 mA rms INPUT POWER REQUIREMENTS Operating range is 85 to 135 AC volts. Current is less than 8 amperes in cut and less than 4 amperes in coag. POWER READOUTS Agree with actual power into rated load to within ± 15% or 5 watts, whichever is greater. ADAPTIVE REM™ SYSTEM •Measurement Frequency: 140 kHz ± 20 kHz •Measurement Current: 3 mA maximum •Acceptable Resistance Ranges: –REM? pad N 5-135 ohms –Non-REM? pad N less than 20 ohms •Acceptance range is 5-135 ohms after REM? PolyHesive? II return electrode is applied. REM? trip is initial impedance plus 40%. For example, if the initial impedance is 30 ohms, the upper level trip is approximately 42 ohms. COOLING Convection, no fan AUDIO VOLUME The mode indicator tones are adjustable to a minimum level of 45 dB at 1 meter. The alarm tones are not adjustable and are set at 65 dB minimum at 1 meter. Also available in a 220-240 volt, 50-60 Hz configuration. Designed to meet UL and CSA specifications INCLUDES: -GROUNDING PLATE -DISPOSABLE HAND PIECE -POWER CORD -BIPOLAR FOOT PEDAL UNIT HAS BEEN EVALUATED AND SOLD AS IS IN GUARANTEED WORKING CONDITION For more information or any questions please call Guido @ (954) 457-0075 If you do not see what you are looking for, please give us a call. WE BUY, SELL AND REPAIR ALL KINDS OF MEDICAL EQUIPMENT POWER CHAIRS, AUTOCLAVES, EKG'S, MONITORS, EXAM LIGHTS, ENT SETS, ULTRASOUNDS, LASERS, LIGHT SOURCES....... SHIPPING COSTS ARE IN THE 50 STATES ONLY WE SHIP WORLDWIDE! -- EXTRA SHIPPING CHARGES APPLY EXTRA FEES MAY APPLY ON BIGGER EQUIPMENT DEPENDING ON IT'S NEEDS (PALLET,CRATE,ETC.) The Doctor's Toy Store accepts credit cards, cashier checks and wire transfers for transactions within the United States. Any transactions outside the country must be paid by wire transfer only. All payments must be verified and cleared before any products are shipped. We ship worldwide! With the increased amount of internet Fraud, The Doctor's Toy Store would like to bring to our customer's attention that there are many websites in which shoppers are targeted for internet fraud. As a consumer who is looking to purchase something as important as medical equipment, you should try to do business with a reputable well established company and that services the products they sell. The Doctor's Toy Store has also been a victim of fraudulent activities in the past. We have made it our first priority to ensure that our customers personal & financial information stays confidential. Click here for Terms of Sale With fifteen years of experience in the medical profession, our company will save you money with durable medical equipment to your specifications. Let us take care of all your medical equipment sales as you make quality decisions that will keep your practice modernized and generating revenue. Disclaimer Remember! (If Applicable) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. If you have questions regarding such, please consult the FDA's WebSite for more information. If you are not a licensed practitioner, the purchase of this item may require a prescription. (954) 457-0075 Toll Free 877-Drstoys Click here for additional contact information

“UNIT DOES SHOW SIGNS OF COSMETIC WEAR AND SCRATCHES. UNIT HAS BEEN EVALUATED AND IS IN GUARANTEED WORKING CONDITION.”

Model	FORCE 2
Brand	VALLEYLAB