Variable Frequency Drive Mysweety Vfd Inverter Frequency Converter 2.2kw 3hp ...

US $199.99

., China
Jul 15th

Open on mobile:
QR code

Package include: 1 x 1.5kw / 2.2kw 220v Inverter (The inverter is single-phase 220V input, three-phase 220V output) 1 x Inverter Manual Tech parameters: Type 1.5KW 220V 2.2KW 220V Output current 7A 10A Power 1.5KW 2.2KW Input voltage 220V 220V Drive capacity 2.8KVA 4.0KVA Using motor 1.5KW 2.2KW Weight 1.5KG 1.5KG Product Size 170*125*163 170*125*163 Package Size 235*195*230 235*195*230 Note: Please read the instructions carefully before use. This inverter needs150 ohm 200Wbraking resistor,if you want a brake resistor, please click on the picture to purchase: Advantage: Control mode is SPWM, very easy to use and convenient Protection functions are very strong Fin over-heat protection Overload protection Fuse protection Restart after instant stop, stall protection Powerful function Manual download(We only have English Manual) https://my.pcloud.com/publink/show?code=XZl1EjkZScfaSxtNo37cUaPfLfn1GLo0xo9X About inverter commissioning manual: [link removed by eBay] If you are unable to download from the above link, please contact me and provide us your email , we will send the manual to you How to judge whether the inverter is good or bad? 1. Restore the factory setting P00.13 to 10, restart the inverter after the light goes out after power-off, remove the connecting motor and ground wire, and run the inverter with no load if the RUN light is always on and there is no fault code. It means that there is no problem with the inverter. 2. If an error code appears after connecting the motor, it may be that the motor is broken; or there is a problem with the wiring Note: Please read the instructions carefully before use. For YL600 inverter, our parameters are set to 50HZ by default. If your motor needs to rotate at high speed, such as a 400HZ spindle motor, you should set the inverter parameters as follows: P00.00 = 400HZ, P00.04 = 400HZ, P00.05 = 400HZ, P00.07 = 40HZ, P00.08=10.0HZ,P00.09 = 4.0HZ, P03.09 = 400HZ, P03.13 = 400HZ, P03.17 = 400HZ. If you directly restore the factory settings, the inverter can be used with 50HZ motors. Any problems ,please feel free contact me.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Power Rating	2.2 KW
Brand	Unbranded
Rated Load	3 HP