VEECO FOUR POINT PROBE MODEL FPP5000 TESTED, US $4,250.00 – Picture 0

VEECO FOUR POINT PROBE MODEL FPP5000 TESTED, US $4,250.00 – Picture 1

VEECO FOUR POINT PROBE MODEL FPP5000 TESTED, US $4,250.00 – Picture 2

VEECO FOUR POINT PROBE MODEL FPP5000 TESTED, US $4,250.00 – Picture 3

VEECO FOUR POINT PROBE MODEL FPP5000 TESTED, US $4,250.00 – Picture 4

Veeco Four Point Probe Model Fpp5000 Tested

US $4,250.00

Manchester, New Hampshire, United States
Jan 30th

Open on mobile:
QR code

YOU ARE BIDDING ON A VEECO FOUR POINT PROBE MODEL FPP5000 SOME DETAILS: Specifications for Veeco FPP-5000 MEASUREMENT FUNCTIONS AND RANGE: Digital computation allows the direct, error tree, display ot sheet resistivity in ohm/square from 1.1mohm/sq to 450Kohm/sq, slice resistivity in ohm-centimeters from 4.19 x 10-2mohm-cm to 17.1Kohm-cm, V/I in ohms from 0.25mohm to 99.9Kohm or metallization thickness in kiloangstroms from 20 A to 243 KA. Use of graphs, tables or mechanical calculations and other associated errors are totally eliminated. OPERATION: Operator simply places wafer on molded wafer carrier, and closes RFI/light shield to initiate test. Unit automatically ranges to correct range and displays correct reading including decimal point and multiplier and wafer type simultaneously. Reading is held to assist in data logging until next test is initiated. PROBE HEAD: Convenient plug-in probe head/adapter assembly permits changing or replacing of worn probe heads in minutes without special tools or alignment fixtures. Alessi probe heads are provided as standard equipment. K&S heads are optional. CONSTANT FORCE MECHANISM: The FPP-5000 utilizes a probe up configuration. This probe up technique assures repeatable probe pressure at every test independent of operator force and substrate thickness. PROBE TIP AND WAFER PROTECTION: The probe tips remain below the stage of the FPP-5000 until the cover is lowered, eliminating damage to the wafer. Probe tips remain unpowered until after contact with wafer to eliminate arcing with consequent probe tip erosion and wafer pitting. RFI/LIGHT SHIELD: Cast aluminum RFI/Light Shield eliminates problems due to radio frequency noise and photoelectric effects when measuring high resistivity layers. DIRECT DIGITAL DISPLAY: Test results are displayed on direct five digit LED display. PENETRATION FUNCTION: Built-in penetration function applies a 170V, 4 msec pulse to probes through a 10M resistance prior to test for low contact resistance if desired. Penetrate function is front panel selected. AUTO TYPING: Automatic type testing (P-N) is determined by a Rectification or Thermoelectric test. The substrate type will be indicated by illumination of either the P or N indicator. Invalid or questionable tests are indicated by illumination of both indicators. FORWARD AND REVERSE CURRENT TEST: Automatic forward and reverse current test for instant verification of proper probe tip contact. CYCLE TIME: Total test time less than 2 secs. (typically 1 sec.) ELECTRONIC ACCURACY: ±0.5% on all but extreme ranges for contact resistances up to 5Kohm. Unique automatic zero circuit minimizes thermal and source impedance effects and eliminates need to manually readjust instrument zero. The self calibration and zero circuitry assures high accuracy. VOLTAGE DETECTOR: Input impedance 10^12 ohm. Input bias current 5OpA. MAINTENANCE & SERVICE: The microprocessor based electronics employ state-of-the-art components for trouble-tree operation and high reliability. All electronic components mounted on easily replaced printed boards. OPERATING TEMPERATURE RANGE: 15°C to 30°C POWER: 115/230 volts±10%, 50/60 Hz. Less than 12 Watts. DIMENSIONS: 15" wide, 16" deep, 5" high (lid closed), 15" high (lid open) WHAT YOU SEE IN THE PIC IS WHAT YOU WILL BE GETTING. THE UNIT PASSES SELF TEST AND WE'LL GIVE A DOMESTIC DOA WARRANTY TO THAT LEVEL. LET US KNOW IF YOU HAVE ANY QUESTIONS. THANKS FOR LOOKING Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“WILL POWER UP WE DON'T HAVE ANY WAFERS TO FULL RUN A TEST”