Velleman Vttest19u Screwdriver Voltage & Continuity Tester - With Led Indication

US $100

  • Torrance, California, United States
  • Jun 3rd
Velleman VTTEST19U SCREWDRIVER VOLTAGE & CONTINUITY TESTER - WITH LED INDICATION Condition : New Manufacturer: VELLEMAN Part Number: VTTEST19U To test voltage: Carefully touch probe on electrical contact or conductor to be tested, then place your finger over the metal contact on the handle marked "touch". If voltage is present, the LED indicator will glow. To test continuity: First disconnect power and remove fuses from circuit/component to be tested. Touch probe on one end of conductor to be tested while placing your finger on the handle's metal contact (marked "touch"); place your other hand and complete the circuit on the other end of the conductor. If continuity exists, the LED indicator will glow. Features with continuity tester with LED indicator Specifications recommended use: indoor altitude: up to 2,000 m working temperature: 5 °C to 40 °C (41 °F to 104 °F) working voltage range: 12 - 300 VAC frequency range: 50/60Hz relative humidity: 80 % RH max. / 50 % RH above 31 °C (88 °F) over voltage category: CAT II 300 V pollution degree: two (accordance with IEC-664) tip/blade dimensions: 0.125" wide (1/8") + 0.625" long (5/8") battery: 2 x 1.5 V button cell batteries (included) with ETL approval

Directions

Similar products from Meters, Monitors & Controllers

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies