Vevor Laser Power Supply 80w Co2 Laser Engraver Power Supply 110v Laser Tube ...

US $168.28

Miami, Florida, United States
Jul 20th

Open on mobile:
QR code

VEVOR Laser Power Supply 80W Co2 Laser Engraver Power Supply 110V Laser Tube Power Supply for Laser Cutter Engraving Machine(80W) HIGH EFFICIENCY- This power supply uses a zero-current half-bridge soft switching circuit, which makes the power supply highly efficient and fast in response. SIMPLE PORT CONTROL- Suitable for high and low-level signals. Use the TTL level to control the laser start and stop. At the same time, a protection switch is added to detect whether there is water or ventilation outside. LASER POWER ADJUSTMENT- The laser power adjustment can input 0 to 5V analog signals, can also input PWM signals. OPEN CIRCUIT PROTECTION- The power supply has an open circuit protection function, which can avoid damage to the laser power supply due to the burst of the laser tube. FACTORY AGING TEST- Each power supply will be subjected to a high temperature 60 ° C 12-hour aging test under full load, and the power supply test will be started and stopped 500 times in 7 seconds. Laser Power Supply The CO2 laser power supply is small in size, light in weight, easy to operate, and has good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube. High Performance Fast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube. Easy Control Laser power supply machine start and stop can be easily controlled by TTL level. Simple Laser Power Control Two methods to adjust laser power: Input 0V to 5V analog sighnal, can also input PWN signal. Mark Clearly Each data is clearly marked for your convenience. Power detection instructions: When the power supply is in standby state, press the test switch. if the L light is on and the P light is on, laser tube does not output laser, the laser tube is broken. If the laser tube outputs laser, the laser power is normal; if the LASER lamp is off, the laser power is bad. Protection Function Open circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power and prolong the service life. Good Compatibility Co2 laser engraver power supply is suitable for a variety of CO2 laser tubes. Specification: Input voltage: AC110V / AC220V Maximum output voltage: 26KV Maximum output current: 28mA Efficiency: 91% Response speed: 1ms Cooling method: fan cooling Gross Weight:2.3kg/5.11lbs Package Size: 27x20x14cm/10.62x7.87x5.51inch Package Content: 1 x high voltage connector 1 x laser power supply Shipping We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Return You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible, as that will allow us to post your item to you sooner! Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact Us If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Size	80W
Model	Does not apply
Color	Black
Brand	VEVOR
MPN	Does not apply
UPC	614198633645
ISBN	0614198633645
EAN	Does not apply